 | Monter d'un niveau |
Brown, W., Marchand, L., & Derenne, M. (2006). Optimised/harmonised room temperature leakage test procedure for generation of asme & cen code gasket factors - analytical phase. Welding Research Council Bulletin, 508, 84-84. Lien externe
Diany, M., Bouzid, A.-H., & Derenne, M. (juillet 2005). On the Validity and Limits of the Gasket Effective Width Concept [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, Colorado, USA. Lien externe
Marchand, L., Derenne, M., & Masi, V. (juillet 2005). Predicting gasket leak rates using a laminar-molecular flow model [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO. Lien externe
Bouzid, A.-H., Diany, M., & Derenne, M. (juillet 2004). Determination of Gasket Effective Width Based on Leakage [Communication écrite]. ASME/JSME Pressure Vessels and Piping Conference (PVP 2004), San Diego, CA, USA. Lien externe
Sakr, O., Bougid, A., & Derenne, M. (2003). Correlation between PPMV and mass leakage rate of gasketing products. Welding Research Council Bulletin (484), 1-11. Non disponible
Arghavani, J., Derenne, M., & Marchand, L. (2003). Effect of Surface Characteristics on Compressive Stress and Leakage Rate in Gasketed Flanged Joints. International Journal of Advanced Manufacturing Technology, 21(10-11), 713-732. Lien externe
Derenne, M., Marchand, L., & Muggo, U. (2003). Exploratory investigation of joint working conditions on the elevated temperature behaviour of metal reinforced flexible graphite sheet materials. Welding Research Council Bulletin (484), 23-38. Non disponible
Bougid, A., Derenne, M., & Marchand, L. (2003). Long duration mechanical performance of PTFE based gasket materials. Welding Research Council Bulletin (484), 12-22. Non disponible
Bouzid, A. H., & Derenne, M. (2002). Analytical Modeling of the Contact Stress With Nonlinear Gaskets. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 47-53. Lien externe
Brown, W., Derenne, M., & Bouzid, A.-H. (août 2002). Determination of Gasket Stress Levels During Thermal Transients [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2002), Vancouver, BC, Canada. Lien externe
Marchand, L., Derenne, M., & Bouzid, H. (2002). Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads. Welding Research Council Bulletin, 473. Non disponible
Arghavani, J., Derenne, M., & Marchand, L. (2002). Prediction of gasket leakage rate and sealing performance through fuzzy logic. International Journal of Advanced Manufacturing Technology, 20(8), 612-620. Lien externe
Allam, M. A., Bazergui, A., Marchand, L., & Derenne, M. (juin 2002). Tube-to-tubesheet joints: maximum tensile stress and contact pressure due to thermal loading and temperature cycling [Communication écrite]. ASME international joint power generation conference-IJPGC 2002, Scottsdale, Arizona, USA. Lien externe
Brown, W., Derenne, M., & Bouzid, A. (juillet 2001). Determination of gasket stress levels during high temperature flange operation [Communication écrite]. ASME/PVP Conference, Atlanta, GA, USA. Non disponible
Arghavani, J., Derenne, M., & Marchand, L. (2001). Fuzzy Logic Application in Gasket Selection and Sealing Performance. International Journal of Advanced Manufacturing Technology, 18(1), 67-78. Lien externe
Arghavani, J., Derenne, M., & Marchand, L. (2001). Sealing Performance of Gasketed Bolted Flanged Joints: a Fuzzy Decision Support System Approach. International Journal of Advanced Manufacturing Technology, 17(1), 2-10. Lien externe
Bouzid, A. H., Derenne, M., Marchand, L., & Payne, J. R. (2001). Service Temperature Characterization of Polytetrafluoroethylene-Based Gaskets. Journal of testing and evaluation, 29(5), 442-452. Lien externe
Sakr, O., Bouzid, H., Derenne, M., & Marchand, L. (janvier 2000). Correlation between PPMV and mass leakage rate of gasketing products [Communication écrite]. 9th international conference on pressure vessel technology ICPVT-9, Sydney, Australia. Non disponible
Mameri, N., Piron, D.-L., Bouzid, A., Derenne, M., Marchand, L., & Birembaut, Y. (2000). Corrosion Quantification Test for Flanges With Graphite-Based Gaskets. Materials Performance, 39(4), 64-69. Non disponible
Derenne, M., Marchand, L., & Bouzid, H. (janvier 2000). Long term elevated temperature performance of metal reinforced flexible graphite sheet gaskets [Communication écrite]. 9th international conference on pressure vessel technoogy ICPVT-9, Sydney, Australia. Non disponible
Marchand, L., Laviolette, D., & Derenne, M. (2000). NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads. Welding Research Council Bulletin (450), 1-20. Non disponible
Bouzid, H., Derenne, M., & Marchand, L. (janvier 2000). Preventing PTFE gasket blow-out [Communication écrite]. 9th international conference on pressure vessel technoogy ICPVT-9, Sydney, Australia. Non disponible
Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (1999). Effect of sealed joints tightness on steels corrosion: Development of novel technology. Environmental degradation of materials and corrosion control in metals, 287-299. Non disponible
Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., & Bouzid, A. (janvier 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 38th Canadian Conference of Metallurgists, Québec, Québec. Non disponible
Mameri, N., Piron, D.-L., Derenne, M., & Marchand, L. (août 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 1st International Symposium on Environmental Degradation of Materials and Corrosion Control In Metals (EDMCCM 1999), Québec, Québec. Non disponible
Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (août 1999). Influence the sealing of joints on the corrosion of steels. Development of new equipment [Communication écrite]. international symposium on environmental degradation of materials and corrosion control in metals - 38. annual conference of metallurgists of CIM. Gateway to the 21st Century, Québec City, QB. Non disponible
Hollinger, G. L., Hsu, K. H., Payne, J. R., Derenne, M., Bouzid, H., Marchand, L., Mueller, R., Waterland, J., & Winter, R. (janvier 1999). Look at today's gasket evaluation technology [Communication écrite]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Non disponible
Derenne, M., Marchand, L., & PAyne, J. R. (1999). Polytetrafuoroetylene (PTFE) gasket qualification. Welding Research Council Bulletin, 442, 1-65. Non disponible
Mameri, N., Bouzid, H., Derenne, M., Marchand, L., & Piron, D. L. (janvier 1999). Quantification of corrosion in bolted gasketed joints [Communication écrite]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Non disponible
Bouzid, A.-H., & Derenne, M. (août 1999). Simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets [Communication écrite]. ASME Pressure Vessels and Piping Conference, Boston, MA. Publié dans Analysis of Bolted Joints, 382. Non disponible
Masi, V., Bouzid, A.-H., & Derenne, M. (juillet 1998). Correlation between gases and mass leak rate of gasketing materials [Communication écrite]. Analysis of bolted joints, 1998: presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, USA. Non disponible
Derenne, M., Payne, J. R., Bouzid, A., & Marchand, L. (janvier 1998). Proposed modifications to draft 9 of the standard test method for gasket constants for bolted joint design [Communication écrite]. Fluid sealing association symposium, Nashville, TN. Non disponible
Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1998). PVRC/MTI technology for characterizatizing technology gasket used in bolted flanged connections. Dans Bickford, J. H. (édit.), Gaskets and gasketed joints (137-302). Lien externe
Marchand, L., Derenne, M., & Payne, J. R. (1998). Summary of gasket steam leakage tests. Welding Research Council Bulletin, 431, 1-46. Non disponible
Bouzid, A.-H., Derenne, M., & Chaarani, A. (juillet 1998). Tightness prediction of bolted flanged connections subjected to external bending moments [Communication écrite]. Analysis of bolted joints, 1998: presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, USA. Non disponible
Bouzid, A., & Derenne, M. (juillet 1997). Distribution of the gasket contact stress in bolted flanged connections [Communication écrite]. 1997 ASME Pressure Vessels and Piping Conference, Orlando, FL, USA. Non disponible
Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (1997). Elevated temperature characterization of flexible graphite sheet materials for bolted flanged joints. Welding Research Council Bulletin, 419, 1-88. Non disponible
Derenne, M., Marchand, L., & Deshaies, F. (1997). Leakage and emission characteristics of sheet gaskets. Welding Research Council Bulletin, 427, 1-61. Non disponible
Derenne, M., Marchand, L., & Payne, J. R. (juillet 1996). Characterization behaviour of flexible graphite sheet gasket materials [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible
Derenne, M., Marchand, L., & Payne, J. R. (janvier 1996). Characterization of the hot relaxation and gross leakage resistance behaviour of PTFE based gasket material [Communication écrite]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Non disponible
Marchand, L., Laviolette, D., Derenne, M., Birembaut, Y., & Ledauphin, T. (janvier 1996). Characterization of two different NPS bolted flanged joints subjected to external bending moments [Communication écrite]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Non disponible
Derenne, M., Payne, J. R., & Marchand, L. (janvier 1996). Development of test procedures for fire resistance qualification of gaskets [Communication écrite]. Technical symposium of the fluid sealing association, Houston, Texas. Non disponible
Marchand, L., & Derenne, M. (juillet 1996). Long term performance of elastomeric sheet gasket materials subjected to temperature exposure [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible
Hsu, K. H., Payne, J. R., & Derenne, M. (juillet 1996). Recent developments in PVRC gasket testing [Communication écrite]. American Society of Mechanical Engineers (ASME) pressure vessels and piping conference, Montréal, Québec. Non disponible
Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (février 1995). Elevated temperature characterization of flexible, graphite sheet gasket materials [Communication écrite]. 1995 SAE International Congress and Exposition, Detroit, MI. Publié dans Sae-Papers, 13(2). Lien externe
Batista, P. P., Marchand, L., & Derenne, M. (juillet 1995). Proposed model for predicting leakage through porous gaskets [Communication écrite]. 1995 Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, HI, USA. Non disponible
Derenne, M., Marchand, L., Bazergui, A., & Payne, J. R. (1994). Elevated temperature testing of gaskets for bolted flanged connections. Welding Research Council Bulletin, 391, 1-37. Non disponible
Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1992). Development of Test Procedures For Fire Resistance Qualification of Gaskets. Dans Nau, B. S. (édit.), Fluid Sealing (193-207). Lien externe
Marchand, L., Bazergui, A., & Derenne, M. (1992). Recent Developments In Elevated Temperature Gasket Evaluation. Dans Nau, B. S. (édit.), Fluid Sealing (209-223). Lien externe
Derenne, M., Bazergui, A., & Payne, J. R. (1989). Estimating Elevated Temperature Gasket Performance with ATRS Tests. SAE technical paper series, 1. Lien externe
