<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Derenne, Michel"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : A | B | D | H | M | S
Nombre de documents: 50

A

Arghavani, J., Derenne, M., & Marchand, L. (2003). Effect of Surface Characteristics on Compressive Stress and Leakage Rate in Gasketed Flanged Joints. International Journal of Advanced Manufacturing Technology, 21(10-11), 713-732. Lien externe

Arghavani, J., Derenne, M., & Marchand, L. (2002). Prediction of gasket leakage rate and sealing performance through fuzzy logic. International Journal of Advanced Manufacturing Technology, 20(8), 612-620. Lien externe

Allam, M. A., Bazergui, A., Marchand, L., & Derenne, M. (janvier 2002). Tube-to-tubesheet joints: maximum tensile stress and contact pressure due to thermal loading and temperature cycling [Communication écrite]. ASME international joint power generation conference-IJPGC 2002, Phoenix, Arizona. Lien externe

Arghavani, J., Derenne, M., & Marchand, L. (2001). Fuzzy Logic Application in Gasket Selection and Sealing Performance. International Journal of Advanced Manufacturing Technology, 18(1), 67-78. Lien externe

Arghavani, J., Derenne, M., & Marchand, L. (2001). Sealing Performance of Gasketed Bolted Flanged Joints: a Fuzzy Decision Support System Approach. International Journal of Advanced Manufacturing Technology, 17(1), 2-10. Lien externe

B

Brown, W., Marchand, L., & Derenne, M. (2006). Optimised/harmonised room temperature leakage test procedure for generation of asme & cen code gasket factors - analytical phase. Welding Research Council Bulletin, 508, 84-84. Lien externe

Bouzid, A.-H., Diany, M., & Derenne, M. (juillet 2004). Determination of Gasket Effective Width Based on Leakage [Communication écrite]. ASME/JSME Pressure Vessels and Piping Conference (PVP 2004), San Diego, CA, USA. Lien externe

Bougid, A., Derenne, M., & Marchand, L. (2003). Long duration mechanical performance of PTFE based gasket materials. Welding Research Council Bulletin (484), 12-22. Non disponible

Bouzid, A. H., & Derenne, M. (2002). Analytical Modeling of the Contact Stress With Nonlinear Gaskets. Journal of Pressure Vessel Technology-Transactions of the Asme, 124(1), 47-53. Lien externe

Brown, W., Derenne, M., & Bouzid, A.-H. (août 2002). Determination of Gasket Stress Levels During Thermal Transients [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2002), Vancouver, BC, Canada. Lien externe

Brown, W., Derenne, M., & Bouzid, A. (juillet 2001). Determination of gasket stress levels during high temperature flange operation [Communication écrite]. ASME/PVP Conference, Atlanta, GA, USA. Non disponible

Bouzid, A. H., Derenne, M., Marchand, L., & Payne, J. R. (2001). Service Temperature Characterization of Polytetrafluoroethylene-Based Gaskets. Journal of testing and evaluation, 29(5), 442-452. Lien externe

Bouzid, H., Derenne, M., & Marchand, L. (janvier 2000). Preventing PTFE gasket blow-out [Communication écrite]. 9th international conference on pressure vessel technoogy ICPVT-9, Sydney, Australia. Non disponible

Bouzid, A.-H., & Derenne, M. (août 1999). Simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets [Communication écrite]. ASME Pressure Vessels and Piping Conference, Boston, MA. Publié dans Analysis of Bolted Joints, 382. Non disponible

Bouzid, A.-H., Derenne, M., & Chaarani, A. (juillet 1998). Tightness prediction of bolted flanged connections subjected to external bending moments [Communication écrite]. Analysis of bolted joints, 1998: presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, USA. Non disponible

Bouzid, A., & Derenne, M. (juillet 1997). Distribution of the gasket contact stress in bolted flanged connections [Communication écrite]. 1997 ASME Pressure Vessels and Piping Conference, Orlando, FL, USA. Non disponible

Batista, P. P., Marchand, L., & Derenne, M. (juillet 1995). Proposed model for predicting leakage through porous gaskets [Communication écrite]. 1995 Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, HI, USA. Non disponible

D

Diany, M., Bouzid, A.-H., & Derenne, M. (juillet 2005). On the Validity and Limits of the Gasket Effective Width Concept [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, Colorado, USA. Lien externe

Derenne, M., Marchand, L., & Muggo, U. (2003). Exploratory investigation of joint working conditions on the elevated temperature behaviour of metal reinforced flexible graphite sheet materials. Welding Research Council Bulletin (484), 23-38. Non disponible

Derenne, M., Marchand, L., & Bouzid, H. (janvier 2000). Long term elevated temperature performance of metal reinforced flexible graphite sheet gaskets [Communication écrite]. 9th international conference on pressure vessel technoogy ICPVT-9, Sydney, Australia. Non disponible

Derenne, M., Marchand, L., & PAyne, J. R. (1999). Polytetrafuoroetylene (PTFE) gasket qualification. Welding Research Council Bulletin, 442, 1-65. Non disponible

Derenne, M., Payne, J. R., Bouzid, A., & Marchand, L. (janvier 1998). Proposed modifications to draft 9 of the standard test method for gasket constants for bolted joint design [Communication écrite]. Fluid sealing association symposium, Nashville, TN. Non disponible

Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1998). PVRC/MTI technology for characterizatizing technology gasket used in bolted flanged connections. Dans Bickford, J. H. (édit.), Gaskets and gasketed joints (137-302). Lien externe

Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (1997). Elevated temperature characterization of flexible graphite sheet materials for bolted flanged joints. Welding Research Council Bulletin, 419, 1-88. Non disponible

Derenne, M., Marchand, L., & Deshaies, F. (1997). Leakage and emission characteristics of sheet gaskets. Welding Research Council Bulletin, 427, 1-61. Non disponible

Derenne, M., Marchand, L., & Payne, J. R. (juillet 1996). Characterization behaviour of flexible graphite sheet gasket materials [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible

Derenne, M., Marchand, L., & Payne, J. R. (janvier 1996). Characterization of the hot relaxation and gross leakage resistance behaviour of PTFE based gasket material [Communication écrite]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Non disponible

Derenne, M., Payne, J. R., & Marchand, L. (janvier 1996). Development of test procedures for fire resistance qualification of gaskets [Communication écrite]. Technical symposium of the fluid sealing association, Houston, Texas. Non disponible

Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (février 1995). Elevated temperature characterization of flexible, graphite sheet gasket materials [Communication écrite]. 1995 SAE International Congress and Exposition, Detroit, MI. Publié dans Sae-Papers, 13(2). Lien externe

Derenne, M., Marchand, L., Bazergui, A., & Payne, J. R. (1994). Elevated temperature testing of gaskets for bolted flanged connections. Welding Research Council Bulletin, 391, 1-37. Non disponible

Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1992). Development of Test Procedures For Fire Resistance Qualification of Gaskets. Dans Nau, B. S. (édit.), Fluid Sealing (193-207). Lien externe

Derenne, M., Bazergui, A., & Payne, J. R. (1989). Estimating Elevated Temperature Gasket Performance with ATRS Tests. SAE technical paper series, 1. Lien externe

H

Hollinger, G. L., Hsu, K. H., Payne, J. R., Derenne, M., Bouzid, H., Marchand, L., Mueller, R., Waterland, J., & Winter, R. (janvier 1999). Look at today's gasket evaluation technology [Communication écrite]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Non disponible

Hsu, K. H., Payne, J. R., & Derenne, M. (juillet 1996). Recent developments in PVRC gasket testing [Communication écrite]. American Society of Mechanical Engineers (ASME) pressure vessels and piping conference, Montréal, Québec. Non disponible

M

Marchand, L., Derenne, M., & Masi, V. (juillet 2005). Predicting gasket leak rates using a laminar-molecular flow model [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO. Lien externe

Marchand, L., Derenne, M., & Bouzid, H. (2002). Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads. Welding Research Council Bulletin, 473. Non disponible

Mameri, N., Piron, D.-L., Bouzid, A., Derenne, M., Marchand, L., & Birembaut, Y. (2000). Corrosion Quantification Test for Flanges With Graphite-Based Gaskets. Materials Performance, 39(4), 64-69. Non disponible

Marchand, L., Laviolette, D., & Derenne, M. (2000). NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads. Welding Research Council Bulletin (450), 1-20. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (1999). Effect of sealed joints tightness on steels corrosion: Development of novel technology. Environmental degradation of materials and corrosion control in metals, 287-299. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., & Bouzid, A. (janvier 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 38th Canadian Conference of Metallurgists, Québec, Québec. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., & Marchand, L. (août 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 1st International Symposium on Environmental Degradation of Materials and Corrosion Control In Metals (EDMCCM 1999), Québec, Québec. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (août 1999). Influence the sealing of joints on the corrosion of steels. Development of new equipment [Communication écrite]. international symposium on environmental degradation of materials and corrosion control in metals - 38. annual conference of metallurgists of CIM. Gateway to the 21st Century, Québec City, QB. Non disponible

Mameri, N., Bouzid, H., Derenne, M., Marchand, L., & Piron, D. L. (janvier 1999). Quantification of corrosion in bolted gasketed joints [Communication écrite]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Non disponible

Masi, V., Bouzid, A.-H., & Derenne, M. (juillet 1998). Correlation between gases and mass leak rate of gasketing materials [Communication écrite]. Analysis of bolted joints, 1998: presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, USA. Non disponible

Marchand, L., Derenne, M., & Payne, J. R. (1998). Summary of gasket steam leakage tests. Welding Research Council Bulletin, 431, 1-46. Non disponible

Marchand, L., Laviolette, D., Derenne, M., Birembaut, Y., & Ledauphin, T. (janvier 1996). Characterization of two different NPS bolted flanged joints subjected to external bending moments [Communication écrite]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Non disponible

Marchand, L., & Derenne, M. (juillet 1996). Long term performance of elastomeric sheet gasket materials subjected to temperature exposure [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible

Marchand, L., Bazergui, A., & Derenne, M. (1992). Recent Developments In Elevated Temperature Gasket Evaluation. Dans Nau, B. S. (édit.), Fluid Sealing (209-223). Lien externe

S

Sakr, O., Bougid, A., & Derenne, M. (2003). Correlation between PPMV and mass leakage rate of gasketing products. Welding Research Council Bulletin (484), 1-11. Non disponible

Sakr, O., Bouzid, H., Derenne, M., & Marchand, L. (janvier 2000). Correlation between PPMV and mass leakage rate of gasketing products [Communication écrite]. 9th international conference on pressure vessel technology ICPVT-9, Sydney, Australia. Non disponible

Liste produite: Thu Mar 28 03:52:24 2024 EDT.