<  Back to the Polytechnique Montréal portal

Items where Author is "Blais, Carl"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Publication Date | Document subtype | No Grouping
Number of items: 16.

Beaudet, F., Blais, C., Lehuy, H., Voyzelle, B., L'Espérance, G., Masse, J.-P., & Krishnadev, M. (2012). Improvement of Hardenability and Static Mechanical Properties of P20+0.5ni Mold Steel Through Additions of Vanadium and Boron. ISIJ International, 52(3), 424-433. External link

Blais, C., L'Espérance, G., & Plamondon, P. (2009). Characterization of powders and pm components utilizing transmission electron microscopy. International Journal of Powder Metallurgy, 45(2), 29-38. Unavailable

Tougas, B., Blais, C., & L'Espérance, G. (2008, June). New iron powder with improved machinability [Paper]. 2008 World Congress on Powder Metallurgy and Particulate Materials, PowderMet 2008, Washington, DC, United states. Unavailable

Campbell-Tremblay, J., Blais, C., L'Espérance, G., & Boilard, P. (2005, June). Characterization of the fatigue performance of P/M components produced with powders developed for improved machinability [Paper]. 2005 International Conference on Powder Metallurgy and Particulate Materials, PowderMet 2005, Montréal, Québec. Unavailable

Blais, C., & L'Espérance, G. (2001). Optimization of machining operations of parts made of high performance alloyed powders. In Powdered metal performance applications (pp. 47-52). Unavailable

Blais, C., & L'Espérance, G. (2001). Optimization of Machining Operations of Parts Made of High Performance Alloyed Powders. Journal of materials and manufacturing, 110(5), 275-280. External link

Blais, C. (2000). Contributions à l'amélioration de l'usinabilité de pièces fabriquées par métallurgie des poudres [Ph.D. thesis, École Polytechnique de Montréal]. Available

Blais, C., Mukhopadhyay, D., Shivashankar, T. S., Ting, J., & Tzimas, E. (1998). Axel Madsen Cpmt Scholar Reports. International Journal of Powder Metallurgy, 34(1), 18-18. Unavailable

Blais, C., L'Espérance, G., & Baril, É. (1998). Characterization of 25-75 nm phases found at the peripyhery of multiphase inclusions: techniques comparison and selection. Journal of Microscopy, 189(3), 249-262. External link

Blais, C., & L'Espérance, G. (1998). Characterization of Inclusions in Steel: When Not Only Size Matters. CIM Bulletin, 91(1021), 116-120. External link

Blais, C., L'Espérance, G., & Miele, P. (1998). Experimental evaluation of the reducibility of oxide particles found in powders and P/M parts. Advances in powder metallurgy and particulate materials (1), 2.41-2.50-2.41-2.50. Unavailable

Blais, C., L'Espérance, G., LeHuy, H., & Forget, C. (1997). Development of an integrated method for fully characterizing multiphase inclusions and its application to calcium-treated steels. Materials Characterization, 38(1), 25-37. External link

Blais, C., L'Espérance, G., Deschenes, B., & de Rege, A. (1997, June). Influence of furnace atmospheres on the chemistry of additives to powders made for improved machinability [Paper]. 1997 International Conference on Powder Metallurgy and Particulate Materials, Chicago, IL, USA. Unavailable

Blais, C., L'Espérance, G., & de Rege, A. (1997, June). State of the art characterization of second phase particles found in powders and P/M parts [Paper]. 1997 International Conference on Powder Metallurgy and Particulate Materials, Chicago, IL, USA. Unavailable

Blais, C. (1996). Développement de méthodes pour la caractérisation d'inclusions [Master's thesis, École Polytechnique de Montréal]. Unavailable

Blais, C., L'Espérance, G., Baril, E., & Forget, C. (1995, August). Estimation of errors resulting from stereological measurements of inclusions characterized by X-ray mapping in SEM [Paper]. Microbeam analysis society 1995, Breckenridge, Colorado, USA. Unavailable

List generated on: Wed Dec 4 09:22:03 2024 EST