Documents dont l'auteur est "Ajersch, Frank"

Réseau de collaboration

Veuillez patienter

Aide

Ce graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.

Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.

Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.

Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.

Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.

A

Ajersch, F., & Ilinca, F. (2017). Review of modeling and simulation of galvanizing operations. Steel Research International, 89(1), 12 pages. Lien externe

Ajersch, F., Ilinca, F., & Goodwin, F. E. (mai 2015). Experimental Study of Skimmings Generation in Galvanizing Baths With Variable Al and Mg Compositions [Communication écrite]. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), Toronto, ON, Canada. Non disponible

Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (2006). Numerical simulation of the rate of dross formation in continuous galvanizing baths. Iron and Steel Technology, 3(8), 93-101. Lien externe

Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. (2005). Numerical simulation of flow, temperature and composition variations in a galvanizing bath. Canadian Metallurgical Quarterly, 44(3), 369-378. Lien externe

Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (mai 2005). Numerical simulation of the rate of dross formation in continuous galvanizing baths [Communication écrite]. AISTech 2005, Iron & Steel Technology Conference, Charlotte, NC, USA. Lien externe

Ajersch, F., Ilinca, F., & Hetu, J. F. (2004). Simulation of Flow in a Continuous Galvanizing Bath: Part I. Thermal Effects of Ingot Addition. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 35(1), 161-170. Lien externe

Ajersch, F., Ilinca, F., & Hetu, J.-F. (2004). Simulation of flow in a continuous galvanizing bath: Part II. Transient aluminum distribution resulting from ingot addition. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 35(1), 171-178. Lien externe

Azzi, L., & Ajersch, F. (juin 2002). Développement des alliages à base d'aluminium pour la mise en forme à l'état semi-solide [Communication écrite]. Congrès international sur l'aluminium et sa mise en forme à chaud : moulage et formage (TRANS AL 2002), Lyon, France. Publié dans Fonderie, Fondeur d'aujourd'hui, 50(224). Non disponible

Ajersch, F., Ilinca, F., & Hétu, J.-F. (janvier 2002). Numerical analysis of the effect of temperature variation on flow in a continuous galvanizing bath [Communication écrite]. 44th MWSP conference. Non disponible

Ajersch, F., Trépanier, L., & Goodwin, F. E. (septembre 2002). Particle Size and Composition of Dross Particles from Galvanize and Galvanneal Operations [Communication écrite]. 44th Mechanical Working and Steel Processing Conference (MWSP 2002), Orlando, Florida. Non disponible

Ajersch, F., Ilinca, F., Perrault, M., Malo, A., & Hétu, J.-F. Numerical analysis of the effect of operating parameters on flow in a continuous galvanizing bath [Communication écrite]. 5th International Conference on Zinc and Zinc alloy Coated Sheet (GALVATECH 2001). Non disponible

Azzi, L., Ajersch, F., & Stephenson, T. E. (août 2001). Thixotropy of semi-solid GrANi composite alloys [Communication écrite]. Materials in the Automotive Industry: International Symposium on Materials in the Automotive Industry as held at the 40th Annual Conference of Metallurgists of CIM (COM 2001), Toronto, Ontario, Canada. Non disponible

Ajersch, F., Gauthier, M., & Binet, C. (août 2000). Kinetics of continuous galvanizing processes [Communication écrite]. Fundamentals of Metallurgical Processing: The James M. Toguri Symposium as held at the 39th Annual Conference of Metallurgists of CIM, Ottawa, Ontario, Canada. Non disponible

Azzi, L., Ajersch, F., & Stevenson, T. F. (janvier 2000). Rheological characteristics of semi-solid GrANi composite alloy [Communication écrite]. 6th International Conference on Semi-Solid Processing of Alloys and Composites. Non disponible

Ajersch, F., Binet, C., Goodwin, F. E., Turke, K. S., & Kolisnyk, P. S. (septembre 1998). Validation studies of the numerical simulation of flow in the bethlehem steel, burns harbor galvanizing bath [Communication écrite]. 4th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 98), Makuhari, Chiba, Japan. Non disponible

Abuluwefa, H. T., Guthrie, R. I. L., & Ajersch, F. (1997). Oxidation of low carbon steel in multicomponent gases .1. Reaction mechanisms during isothermal oxidation. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 28(8), 1633-1641. Lien externe

Abuluwefa, H. T., Guthrie, R. I. L., & Ajersch, F. (1997). Oxidation of low carbon steel in multicomponent gases .2. Reaction mechanisms during reheating. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 28(8), 1643-1651. Lien externe

Abuluwefa, H., Guthrie, R. I. L., & Ajersch, F. (1996). The effect of oxygen concentration on the oxidation of low-carbon steel in the temperature range 1000 to 1250 Degree c. Oxidation of metals, 46(5-6), 423-440. Lien externe

Abuluwefa, H., Root, J. H., Guthrie, R. I. L., & Ajersch, F. (1996). Real-time observations of the oxidation of mild steel at high temperature by neutron diffraction. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 27(6), 993-997. Lien externe

Ajersch, F., Hayer, E., Barbier, J.-N., & Ansara, I. (1975). On the Computation of the Cd-Bi-Sb Phase Diagram. International Journal of Materials Research, 66(10), 624-628. Lien externe

B

Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2012). Propagation of short fatigue cracks in permanent and semi-solid mold 357 alumiunum alloy. International Journal of Fatigue, 36(1), 120-129. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2010). High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy. International Journal of Fatigue, 32(8), 1233-1242. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (janvier 2009). Résistance en fatigue de l'alliage A357 moulé en coquille et rhéomoulé [Communication écrite]. Journée du REGAL 2009. Non disponible

Brochu, M., Verreman, Y., Ajersch, F., & Charette, N. (janvier 2008). Défis expérimentaux dans l'étude du comportement en fatigue de l'alliage A357 [Communication écrite]. Journée du REGAL 2008. Non disponible

Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (juillet 2009). Fatigue testing of a cast aluminum alloy : experimental challenges [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible

Brochu, M., Verreman, Y., & Ajersch, F. (2009). La mise en forme dans le domaine semi-solide : des avantages métallurgiques et économiques. Materiaux et techniques, 97(2), 90-93. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (septembre 2008). Fatigue behavior of semi-solid cast aluminum: A critical review [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe

Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. Fatigue des pièces d'aluminium fabriquées par voie semi-solide [Communication écrite]. Journée du REGAL 2007. Non disponible

Bui, R. T., Charette, A., Fafard, M., Soucy, G., Ajersch, F., Masounave, J., & Chiesa, F. (2003). Networked research program for aluminium production and transformation. JOM, 55(5), 43-47. Lien externe

Binet, C., Ajersch, F., & Bui, R. T. (janvier 2001). Experimental validation and numerical simulation of turbulent flow in a water model galvanizing bath [Communication écrite]. Symposium on computer applications in metals processing. The metallurgical society of CIM. Non disponible

Beaulieu, A., Azzi, L., Ajersch, F., Turenne, S., Pineau, F., & Loong, C. A. (juin 2000). Numerical modeling and experimental analysis of die cast semi-solidA356 alloy [Communication écrite]. Merton C. Flemings Symposium on Solidification and Materials Processing, Cambridge, MA, USA. Non disponible

Binet, C., & Ajersch, F. Application of mixing models to evaluate the transport of aluminum in a continuous galvanizing bath [Communication écrite]. 4th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 98), Chiba, Japan. Non disponible

E

Elgallad, E. M., Hekmat-Ardakan, A., Ajersch, F., & Chen, X.-G. (juin 2012). Microstructure and mechanical properties of AA2105 DC cast ingot plates [Communication écrite]. 13th International conference on Aluminum Alloys (ICAA31), Pittsburgh, Pennsylvania. Lien externe

El-Naas, M. H., Munz, R. J., & Ajersch, F. (1998). Modelling of a Plasma Reactor for the Synthesis of Calcium Carbide. Canadian Metallurgical Quarterly, 37(1), 67-74. Lien externe

El-Naas, M. H., Munz, R. J., & Ajersch, F. (1998). Solid-Phase Synthesis of Calcium Carbide in a Plasma Reactor. Plasma Chemistry and Plasma Processing, 18(3), 409-427. Lien externe

El-Naas, M. H., Ajersch, F., & Munz, R. J. (janvier 1996). Effect of carbon reactivity on plasma synthesis of calcium carbide [Communication écrite]. 35th Annual Conference on Metallurgists of CIM. Non disponible

Essalik, A., Savadogo, O., & Ajersch, F. (1995). Chemical and electrochemical parameters for oxygen reduction on pt-H₂WO₄/carbon electrodes in 99-percent H₃PO₄. Journal of The Electrochemical Society, 142(5), 1368-1376. Lien externe

El-Naas, M. H., Munz, R. J., & Ajersch, F. (janvier 1995). Production of calcium carbide in a plasma-jet fluid bed reactor [Communication écrite]. 12th int. symp. on plasma chemistry, Minneapolis. Non disponible

G

Gauthier, M., & Ajersch, F. (janvier 2002). Analytical modeling of the phase transformation kinetics of intermetallic particles suspended in otdip galvanizing and galvannealing baths [Communication écrite]. 44th MWSP conference. Non disponible

Gauthier, M., Ajersch, F., & McDermid, J. R. (janvier 2001). Phase transformation mechanisms of intermetallic particles suspended in hot-dip galvanizing and galvannealing baths [Communication écrite]. GALVATECH 2001. 5th int. conf. on Zinc and zinc aloy coated sheet. Non disponible

Grenier, S., Shanker, K., Tsantrizos, P., & Ajersch, F. (1996). Deposition of TiN films using a thermal plasma reactive forming technology. Surface & Coatings Technology, 82(3), 311-316. Lien externe

Grenier, S., Shankar, K., Tsantrizos, P., & Ajersch, F. (janvier 1995). Formation of TiN films using thermal plasma reactive formig [Communication écrite]. 8th International Symposium on Novel Techniques in Synthesis and Processing of Advanced Materials. Non disponible

Gagné, M., & Ajersch, F. (janvier 1995). Galvanising bath water model tests by monitoring pH changes from localised acid solutions [Communication écrite]. Galvatech 95, Chicago, Ill, Usa. Non disponible

H

Hekmat-Ardakan, A., Elgallad, E. M., Ajersch, F., & Chen, X.-G. (2012). Microstructural evolution and mechanical properties of as-cast and T6-treated AA2195 DC cast alloy. Materials Science and Engineering A, 558, 76-81. Lien externe

Hekmat-Ardakan, A., Ajersch, F., & Chen, X.-G. (2011). Microstructure modification of Al-17%Si alloy by addition of Mg. Journal of Materials Science, 46(7), 2370-2378. Lien externe

Hekmat-Ardakan, A., & Ajersch, F. (2010). Effect of conventional and rheocasting processes on microstructural characteristics of hypereutectic Al-Si-Cu-Mg alloy with variable Mg content. Journal of Materials Processing Technology, 210(5), 767-775. Lien externe

Hekmat-Ardakan, A., & Ajersch, F. (2010). Effect of isothermal ageing on the semi-solid microstructure of rheoprocessed and partially remelted of A390 alloy with 10% Mg addition. Materials Characterization, 61(8), 778-785. Lien externe

Hekmat-Ardakan, A., & Ajersch, F. (2010). Thermodynamic evaluation of hypereutectic Al-Si (A390) alloy with addition of Mg. ACTA Materialia, 58(9), 3422-3428. Lien externe

Hekmat-Ardakan, A., Liu, X., Ajersch, F., & Chen, X.-G. (2010). Wear behaviour of hypereutectic Al-Si-Cu-Mg casting alloys with variable Mg contents. Wear, 269(9-10), 684-692. Lien externe

I

Ilinca, F., Ajersch, F., & Goodwin, F. E. (mai 2015). Numerical Analysis of the Modification of Flow Using a Pumping System in the Galvanizing Bath [Communication écrite]. 10th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech 2015), Toronto, ON, Canada. Non disponible

Ilinca, F., Hétu, J.-F., Moisan, J.-F., & Ajersch, F. (2008). Three-dimensional injection molding simulation of AZ91D semi-solid magnesium alloy. International Journal of Material Forming, 1(1), 3-12. Lien externe

Ilinca, F., Hétu, J.-F., Ajersch, F., & Moisan, J.-F. (septembre 2008). Mold filling simulation of semi-solid magnesium alloys [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe

Ilnca, F., Ajersch, F., Baril, C., & Goodwin, F. E. (2007). Numerical Simulation of the Galvanizing Process During Ga to Gi Transition. International Journal for Numerical Methods in Fluids, 53(10), 1629-1646. Lien externe

Ilinca, F., Hetu, J.-F., & Ajersch, F. (juin 2005). Numerical simulation of 3D turbulent flow and heat transfer in a continuous galvanizing bath [Communication écrite]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. Lien externe

Ilinca, F., Hetu, J. F., & Ajersch, F. Numerical simulation of Al and Fe distribution during continuous galvanizing operations [Communication écrite]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Lien externe

Ilinca, F., Hetu, J. F., & Ajersch, F. (2003). Three-Dimensional Numerical Simulation of Turbulent Flow and Heat Transfer in a Continuous Galvanizing Bath. Numerical Heat Transfer. Part A, Applications, 44(5), 463-482. Lien externe

K

Kim, G., Meunier, J.-L., & Ajersch, F. (janvier 1995). Effect of nitrogen on cathode spot characteristics in arc ion-plating of TiN [Communication écrite]. international symposium on plasma chemistry, Minneapolis. Lien externe

Kim, G. E., Meunier, J. L., & Ajersch, F. (1995). Experimental-study of the effect of nitrogen on titanium-arc cathode erosion. IEEE Transactions on Plasma Science, 23(6), 1001-1005. Lien externe

Kim, G., & Ajersch, F. (1994). Surface energy and chemical characteristics of interfaces of adhesively bonded aluminium joints. Journal of Materials Science, 29(3), 676-681. Lien externe

L

Lashkari, O., Ajersch, F., Charette, A., & Chen, X. G. (2008). Microstructure and Rheological Behavior of Hypereutectic Semi-Solid Al-Si Alloy Under Low Shear Rates Compression Test. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 492(1-2), 377-382. Lien externe

Lashkari, O., Ghomashchi, R., & Ajersch, F. (2007). Deformation Behavior of Semi-Solid A356 Al-Si Alloy at Low Shear Rates: the Effect of Sample Size. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 444(1-2), 198-205. Lien externe

Loong, C. A., Zhang, C. Q., Beaulieu, A., & Ajersch, F. (août 2001). Semi-solid casting of A356 billets re-heated by high frequency induction system [Communication écrite]. int. symposium light metal 2001, Metallurgical society of CIM, Toronto, Canada. Non disponible

Laplante, S., Legros, N., Ajersch, F., Clément, B., & Turenne, S. (janvier 1996). Extrusion of thixocast semi-solid A356-12SiCp cylindrical sections [Communication écrite]. 4th International Conference on Semi-Solid Processing of Alloys and Composites, Sheffield. Non disponible

Laplante, S., Ajersch, F., & Legros, N. (mai 1995). Extrusion of AlSi/SiCp composite alloys in the semi-solid state [Communication écrite]. ENERCOMP 95: international conference on composite materials and energy, Montréal, Québec. Non disponible

M

Messaoud, F., & Ajersch, F. (2012). Rheological Behaviour of Az91d Magnesium Alloy in Semisolid State. Canadian Metallurgical Quarterly, 51(2), 184-194. Lien externe

Messaoud, F., Azzi, L., & Ajersch, F. Rheological Characteristics of Az91e Alloys in Semi-Solid State [Communication écrite]. Aluminum 2003. Non disponible

Mada, M., & Ajersch, F. (1996). Rheological model of semi-solid A356-SiC composite alloys. Pt. 1. Dissociation of agglomerate structures during shear. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 212(1), 157-170. Lien externe

Mada, M., & Ajersch, F. (1996). Rheological model of semi-solid A356-SiC composite alloys. Pt. 2. Reconstitution of agglomerate structures at rest. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 212(1), 171-177. Lien externe

N

Nafisi, S., Lashkari, O., Ghomashchi, R., Ajersch, F., & Charette, A. (2006). Microstructure and Rheological Behavior of Grain Refined and Modified Semi-Solid A356 Al-Si Slurries. ACTA Materialia, 54(13), 3503-3511. Lien externe

O

Ouellet, L., Ajersch, F., & Ilinca, F. Numerical simulation and validation of flow in a galvanizing bath using a water model [Communication écrite]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Lien externe

P

Paré, A., Binet, C., & Ajersch, F. (janvier 1995). Numerical simulation of 3-dimensional flow in a continuous strip galvanizing bath [Communication écrite]. Galvatech 95, Chicago, Il, USA. Non disponible

S

Smagorinski, M., Tsantrizos, P., Grenier, S., Entezarian, M., & Ajersch, F. (1996). Thermal plasma near-net-shape spray forming of al composites. JOM, 48(6), 56-59. Lien externe

T

Tebib, M., Samuel, A. M., Ajersch, F., & Chen, X.-G. (2014). Effect of P and Sr additions on the microstructure of hypereutectic Al-15Si-14Mg-4Cu alloy. Materials Characterization, 89, 112-123. Lien externe

Tebib, M., Ajersch, F., & Chen, X.-G. (2013). Rheological Properties and Microstructure of Hypereutectic Al-Si-Mg Alloys Using Rheocasting Route. Solid State Phenomena, 192-193, 323-8. Lien externe

Tebib, M., Ajersch, F., & Chen, X.-G. (octobre 2012). Rheological properties and microstructure of hypereutectic semi-solid Al-Si-Mg alloys using rheocasting route [Communication écrite]. 12th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2012, Cape Town, South Africa. Lien externe

Tebib, M., Ajersch, F., Samuel, A. M., & Chen, X.-G. (2013). Solidification and microstructural evolution of hypereutectic Al-15Si-4Cu-Mg alloys with high magnesium contents. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(9), 4282-4295. Lien externe

Tebib, M., Morin, J. B., Ajersch, F., & Grant Chen, X. (2010). Semi-solid processing of hypereutectic A390 alloys using novel rheoforming process. Transactions of Nonferrous Metals Society of China (English Edition), 20(9), 1743-1748. Lien externe

Turenne, S., Legros, N., Laplante, S., & Ajersch, F. (1999). Mechanical Behavior of Aluminum Matrix Composite During Extrusion in the Semisolid State. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(4), 1137-1146. Lien externe

W

Willis, D. J., Ilinca, F., Ajersch, F., & Setargew, N. (2007). Fluid Flow Modelling in a 55% Al-Zn Coating Metal Pot. Progress in Computational Fluid Dynamics, 7(2-4), 183-194. Lien externe

Willis, D. J., Ilinca, F., & Ajersch, F. Fluid flow modeling in a 55% Al-Zn pot [Communication écrite]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Non disponible

Wang, W., Ajersch, F., & Löfvander, J. P. A. (1994). Si phase nucleation on SiC particulate reinforcement in hypereutectic Al-Si alloy matrix. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 187(1), 65-75. Lien externe