 | Monter d'un niveau |
Ajersch, F., & Ilinca, F. (2017). Review of modeling and simulation of galvanizing operations. Steel Research International, 89(1), 12 pages. Lien externe
Tebib, M., Samuel, A. M., Ajersch, F., & Chen, X.-G. (2014). Effect of P and Sr additions on the microstructure of hypereutectic Al-15Si-14Mg-4Cu alloy. Materials Characterization, 89, 112-123. Lien externe
Tebib, M., Ajersch, F., & Chen, X.-G. (2013). Rheological Properties and Microstructure of Hypereutectic Al-Si-Mg Alloys Using Rheocasting Route. Solid State Phenomena, 192-193, 323-8. Lien externe
Tebib, M., Ajersch, F., & Chen, X.-G. (octobre 2012). Rheological properties and microstructure of hypereutectic semi-solid Al-Si-Mg alloys using rheocasting route [Communication écrite]. 12th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2012, Cape Town, South Africa. Lien externe
Tebib, M., Ajersch, F., Samuel, A. M., & Chen, X.-G. (2013). Solidification and microstructural evolution of hypereutectic Al-15Si-4Cu-Mg alloys with high magnesium contents. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(9), 4282-4295. Lien externe
Hekmat-Ardakan, A., Elgallad, E. M., Ajersch, F., & Chen, X.-G. (2012). Microstructural evolution and mechanical properties of as-cast and T6-treated AA2195 DC cast alloy. Materials Science and Engineering A, 558, 76-81. Lien externe
Elgallad, E. M., Hekmat-Ardakan, A., Ajersch, F., & Chen, X.-G. (juin 2012). Microstructure and mechanical properties of AA2105 DC cast ingot plates [Communication écrite]. 13th International conference on Aluminum Alloys (ICAA31), Pittsburgh, Pennsylvania. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2012). Propagation of short fatigue cracks in permanent and semi-solid mold 357 alumiunum alloy. International Journal of Fatigue, 36(1), 120-129. Lien externe
Messaoud, F., & Ajersch, F. (2012). Rheological Behaviour of Az91d Magnesium Alloy in Semisolid State. Canadian Metallurgical Quarterly, 51(2), 184-194. Lien externe
Hekmat-Ardakan, A., Ajersch, F., & Chen, X.-G. (2011). Microstructure modification of Al-17%Si alloy by addition of Mg. Journal of Materials Science, 46(7), 2370-2378. Lien externe
Hekmat-Ardakan, A., & Ajersch, F. (2010). Effect of conventional and rheocasting processes on microstructural characteristics of hypereutectic Al-Si-Cu-Mg alloy with variable Mg content. Journal of Materials Processing Technology, 210(5), 767-775. Lien externe
Hekmat-Ardakan, A., & Ajersch, F. (2010). Effect of isothermal ageing on the semi-solid microstructure of rheoprocessed and partially remelted of A390 alloy with 10% Mg addition. Materials Characterization, 61(8), 778-785. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (2010). High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy. International Journal of Fatigue, 32(8), 1233-1242. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bouchard, D. (janvier 2009). Résistance en fatigue de l'alliage A357 moulé en coquille et rhéomoulé [Communication écrite]. Journée du REGAL 2009. Non disponible
Tebib, M., Morin, J. B., Ajersch, F., & Grant Chen, X. (2010). Semi-solid processing of hypereutectic A390 alloys using novel rheoforming process. Transactions of Nonferrous Metals Society of China (English Edition), 20(9), 1743-1748. Lien externe
Hekmat-Ardakan, A., & Ajersch, F. (2010). Thermodynamic evaluation of hypereutectic Al-Si (A390) alloy with addition of Mg. ACTA Materialia, 58(9), 3422-3428. Lien externe
Hekmat-Ardakan, A., Liu, X., Ajersch, F., & Chen, X.-G. (2010). Wear behaviour of hypereutectic Al-Si-Cu-Mg casting alloys with variable Mg contents. Wear, 269(9-10), 684-692. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Charette, N. (janvier 2008). Défis expérimentaux dans l'étude du comportement en fatigue de l'alliage A357 [Communication écrite]. Journée du REGAL 2008. Non disponible
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (juillet 2009). Fatigue testing of a cast aluminum alloy : experimental challenges [Communication écrite]. 12th International Conference on Fracture, Ottawa, Ontario. Non disponible
Brochu, M., Verreman, Y., & Ajersch, F. (2009). La mise en forme dans le domaine semi-solide : des avantages métallurgiques et économiques. Materiaux et techniques, 97(2), 90-93. Lien externe
Ilinca, F., Hétu, J.-F., Moisan, J.-F., & Ajersch, F. (2008). Three-dimensional injection molding simulation of AZ91D semi-solid magnesium alloy. International Journal of Material Forming, 1(1), 3-12. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. (septembre 2008). Fatigue behavior of semi-solid cast aluminum: A critical review [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe
Brochu, M., Verreman, Y., Ajersch, F., & Bucher, L. Fatigue des pièces d'aluminium fabriquées par voie semi-solide [Communication écrite]. Journée du REGAL 2007. Non disponible
Lashkari, O., Ajersch, F., Charette, A., & Chen, X. G. (2008). Microstructure and Rheological Behavior of Hypereutectic Semi-Solid Al-Si Alloy Under Low Shear Rates Compression Test. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 492(1-2), 377-382. Lien externe
Ilinca, F., Hétu, J.-F., Ajersch, F., & Moisan, J.-F. (septembre 2008). Mold filling simulation of semi-solid magnesium alloys [Communication écrite]. 10th International Conference on Semi-Solid Processing of Alloys and Composites (S2P 2008), Aachen, Germany. Publié dans Solid State Phenomena, 141-143. Lien externe
Lashkari, O., Ghomashchi, R., & Ajersch, F. (2007). Deformation Behavior of Semi-Solid A356 Al-Si Alloy at Low Shear Rates: the Effect of Sample Size. Materials Science and Engineering. A, Structural Materials Properties Microstructure and Processing, 444(1-2), 198-205. Lien externe
Willis, D. J., Ilinca, F., Ajersch, F., & Setargew, N. (2007). Fluid Flow Modelling in a 55% Al-Zn Coating Metal Pot. Progress in Computational Fluid Dynamics, 7(2-4), 183-194. Lien externe
Ilnca, F., Ajersch, F., Baril, C., & Goodwin, F. E. (2007). Numerical Simulation of the Galvanizing Process During Ga to Gi Transition. International Journal for Numerical Methods in Fluids, 53(10), 1629-1646. Lien externe
Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (2006). Numerical simulation of the rate of dross formation in continuous galvanizing baths. Iron and Steel Technology, 3(8), 93-101. Lien externe
Nafisi, S., Lashkari, O., Ghomashchi, R., Ajersch, F., & Charette, A. (2006). Microstructure and Rheological Behavior of Grain Refined and Modified Semi-Solid A356 Al-Si Slurries. ACTA Materialia, 54(13), 3503-3511. Lien externe
Ilinca, F., Hetu, J.-F., & Ajersch, F. (juin 2005). Numerical simulation of 3D turbulent flow and heat transfer in a continuous galvanizing bath [Communication écrite]. 17th AIAA Computational Fluid Dynamics Conference, Toronto, ON, Canada. Lien externe
Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. (2005). Numerical simulation of flow, temperature and composition variations in a galvanizing bath. Canadian Metallurgical Quarterly, 44(3), 369-378. Lien externe
Ajersch, F., Ilinca, F., Hetu, J.-F., & Goodwin, F. E. (mai 2005). Numerical simulation of the rate of dross formation in continuous galvanizing baths [Communication écrite]. AISTech 2005, Iron & Steel Technology Conference, Charlotte, NC, USA. Lien externe
Willis, D. J., Ilinca, F., & Ajersch, F. Fluid flow modeling in a 55% Al-Zn pot [Communication écrite]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Non disponible
Ouellet, L., Ajersch, F., & Ilinca, F. Numerical simulation and validation of flow in a galvanizing bath using a water model [Communication écrite]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Lien externe
Ilinca, F., Hetu, J. F., & Ajersch, F. Numerical simulation of Al and Fe distribution during continuous galvanizing operations [Communication écrite]. Galvatech '04 : 6th international conference on zinc and zinc alloy coated steel sheet. Lien externe
Ajersch, F., Ilinca, F., & Hetu, J. F. (2004). Simulation of Flow in a Continuous Galvanizing Bath: Part I. Thermal Effects of Ingot Addition. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 35(1), 161-170. Lien externe
Ajersch, F., Ilinca, F., & Hetu, J.-F. (2004). Simulation of flow in a continuous galvanizing bath: Part II. Transient aluminum distribution resulting from ingot addition. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 35(1), 171-178. Lien externe
Azzi, L., & Ajersch, F. (juin 2002). Développement des alliages à base d'aluminium pour la mise en forme à l'état semi-solide [Communication écrite]. Congrès international sur l'aluminium et sa mise en forme à chaud : moulage et formage (TRANS AL 2002), Lyon, France. Publié dans Fonderie, Fondeur d'aujourd'hui, 50(224). Non disponible
Bui, R. T., Charette, A., Fafard, M., Soucy, G., Ajersch, F., Masounave, J., & Chiesa, F. (2003). Networked research program for aluminium production and transformation. JOM, 55(5), 43-47. Lien externe
Messaoud, F., Azzi, L., & Ajersch, F. Rheological Characteristics of Az91e Alloys in Semi-Solid State [Communication écrite]. Aluminum 2003. Non disponible
Ilinca, F., Hetu, J. F., & Ajersch, F. (2003). Three-Dimensional Numerical Simulation of Turbulent Flow and Heat Transfer in a Continuous Galvanizing Bath. Numerical Heat Transfer. Part A, Applications, 44(5), 463-482. Lien externe
Gauthier, M., & Ajersch, F. (janvier 2002). Analytical modeling of the phase transformation kinetics of intermetallic particles suspended in otdip galvanizing and galvannealing baths [Communication écrite]. 44th MWSP conference. Non disponible
Ajersch, F., Ilinca, F., & Hétu, J.-F. (janvier 2002). Numerical analysis of the effect of temperature variation on flow in a continuous galvanizing bath [Communication écrite]. 44th MWSP conference. Non disponible
Ajersch, F., Trépanier, L., & Goodwin, F. E. (janvier 2002). Particle size and composition of dross particles from galvanize and galvanneal operations [Communication écrite]. 44th MWSP conference. Non disponible
Binet, C., Ajersch, F., & Bui, R. T. (janvier 2001). Experimental validation and numerical simulation of turbulent flow in a water model galvanizing bath [Communication écrite]. Symposium on computer applications in metals processing. The metallurgical society of CIM. Non disponible
Ajersch, F., Ilinca, F., Perrault, M., Malo, A., & Hétu, J.-F. Numerical analysis of the effect of operating parameters on flow in a continuous galvanizing bath [Communication écrite]. 5th International Conference on Zinc and Zinc alloy Coated Sheet (GALVATECH 2001). Non disponible
Beaulieu, A., Azzi, L., Ajersch, F., Turenne, S., Pineau, F., & Loong, C. A. (juin 2000). Numerical modeling and experimental analysis of die cast semi-solidA356 alloy [Communication écrite]. Merton C. Flemings Symposium on Solidification and Materials Processing, Cambridge, MA, USA. Non disponible
Gauthier, M., Ajersch, F., & McDermid, J. R. (janvier 2001). Phase transformation mechanisms of intermetallic particles suspended in hot-dip galvanizing and galvannealing baths [Communication écrite]. GALVATECH 2001. 5th int. conf. on Zinc and zinc aloy coated sheet. Non disponible
Loong, C. A., Zhang, C. Q., Beaulieu, A., & Ajersch, F. (janvier 2001). Semi-solid casting of A356 billets re-heated by high frequency induction system [Communication écrite]. int. symposium loght metal 2001, Metallurgical society of CIM. Non disponible
Azzi, L., Ajersch, F., & Stephenson, T. E. (août 2001). Thixotropy of semi-solid GrANi composite alloys [Communication écrite]. Materials in the Automotive Industry: International Symposium on Materials in the Automotive Industry as held at the 40th Annual Conference of Metallurgists of CIM (COM 2001), Toronto, Ontario, Canada. Non disponible
Ajersch, F., Gauthier, M., & Binet, C. (août 2000). Kinetics of continuous galvanizing processes [Communication écrite]. Fundamentals of Metallurgical Processing: The James M. Toguri Symposium as held at the 39th Annual Conference of Metallurgists of CIM, Ottawa, Ontario, Canada. Non disponible
Azzi, L., Ajersch, F., & Stevenson, T. F. (janvier 2000). Rheological characteristics of semi-solid GrANi composite alloy [Communication écrite]. 6th International Conference on Semi-Solid Processing of Alloys and Composites. Non disponible
Turenne, S., Legros, N., Laplante, S., & Ajersch, F. (1999). Mechanical Behavior of Aluminum Matrix Composite During Extrusion in the Semisolid State. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 30(4), 1137-1146. Lien externe
Binet, C., & Ajersch, F. Application of mixing models to evaluate the transport of aluminum in a continuous galvanizing bath [Communication écrite]. 4th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 98), Chiba, Japan. Non disponible
El-Naas, M. H., Munz, R. J., & Ajersch, F. (1998). Modelling of a Plasma Reactor for the Synthesis of Calcium Carbide. Canadian Metallurgical Quarterly, 37(1), 67-74. Lien externe
El-Naas, M. H., Munz, R. J., & Ajersch, F. (1998). Solid-Phase Synthesis of Calcium Carbide in a Plasma Reactor. Plasma Chemistry and Plasma Processing, 18(3), 409-427. Lien externe
Ajersch, F., Binet, C., Goodwin, F. E., Turke, K. S., & Kolisnyk, P. S. Validation studies of the numerical simulation of flow in the bethlehem steel, burns harbor galvanizing bath [Communication écrite]. 4th International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH 98). Non disponible
Abuluwefa, H. T., Guthrie, R. I. L., & Ajersch, F. (1997). Oxidation of low carbon steel in multicomponent gases .1. Reaction mechanisms during isothermal oxidation. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 28(8), 1633-1641. Lien externe
Abuluwefa, H. T., Guthrie, R. I. L., & Ajersch, F. (1997). Oxidation of low carbon steel in multicomponent gases .2. Reaction mechanisms during reheating. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 28(8), 1643-1651. Lien externe
Grenier, S., Shanker, K., Tsantrizos, P., & Ajersch, F. (1996). Deposition of TiN films using a thermal plasma reactive forming technology. Surface & Coatings Technology, 82(3), 311-316. Lien externe
El-Naas, M. H., Ajersch, F., & Munz, R. J. (janvier 1996). Effect of carbon reactivity on plasma synthesis of calcium carbide [Communication écrite]. 35th Annual Conference on Metallurgists of CIM. Non disponible
Abuluwefa, H., Guthrie, R. I. L., & Ajersch, F. (1996). The effect of oxygen concentration on the oxidation of low-carbon steel in the temperature range 1000 to 1250 Degree c. Oxidation of metals, 46(5-6), 423-440. Lien externe
Laplante, S., Legros, N., Ajersch, F., Clément, B., & Turenne, S. (janvier 1996). Extrusion of thixocast semi-solid A356-12SiCp cylindrical sections [Communication écrite]. 4th International Conference on Semi-Solid Processing of Alloys and Composites, Sheffield. Non disponible
Abuluwefa, H., Root, J. H., Guthrie, R. I. L., & Ajersch, F. (1996). Real-time observations of the oxidation of mild steel at high temperature by neutron diffraction. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 27(6), 993-997. Lien externe
Mada, M., & Ajersch, F. (1996). Rheological model of semi-solid A356-SiC composite alloys. Pt. 1. Dissociation of agglomerate structures during shear. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 212(1), 157-170. Lien externe
Mada, M., & Ajersch, F. (1996). Rheological model of semi-solid A356-SiC composite alloys. Pt. 2. Reconstitution of agglomerate structures at rest. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 212(1), 171-177. Lien externe
Smagorinski, M., Tsantrizos, P., Grenier, S., Entezarian, M., & Ajersch, F. (1996). Thermal plasma near-net-shape spray forming of al composites. JOM, 48(6), 56-59. Lien externe
Essalik, A., Savadogo, O., & Ajersch, F. (1995). Chemical and electrochemical parameters for oxygen reduction on pt-H₂WO₄/carbon electrodes in 99-percent H₃PO₄. Journal of The Electrochemical Society, 142(5), 1368-1376. Lien externe
Kim, G., Meunier, J.-L., & Ajersch, F. (janvier 1995). Effect of nitrogen on cathode spot characteristics in arc ion-plating of TiN [Communication écrite]. international symposium on plasma chemistry, Minneapolis. Lien externe
Kim, G. E., Meunier, J. L., & Ajersch, F. (1995). Experimental-study of the effect of nitrogen on titanium-arc cathode erosion. IEEE Transactions on Plasma Science, 23(6), 1001-1005. Lien externe
Laplante, S., Ajersch, F., & Legros, N. (mai 1995). Extrusion of AlSi/SiCp composite alloys in the semi-solid state [Communication écrite]. ENERCOMP 95: international conference on composite materials and energy, Montréal, Québec. Non disponible
Grenier, S., Shankar, K., Tsantrizos, P., & Ajersch, F. (janvier 1995). Formation of TiN films using thermal plasma reactive formig [Communication écrite]. 8th International Symposium on Novel Techniques in Synthesis and Processing of Advanced Materials. Non disponible
Gagné, M., & Ajersch, F. (janvier 1995). Galvanising bath water model tests by monitoring pH changes from localised acid solutions [Communication écrite]. Galvatech 95, Chicago, Ill, Usa. Non disponible
Paré, A., Binet, C., & Ajersch, F. (janvier 1995). Numerical simulation of 3-dimensional flow in a continuous strip galvanizing bath [Communication écrite]. Galvatech 95, Chicago, Il, USA. Non disponible
El-Naas, M. H., Munz, R. J., & Ajersch, F. (janvier 1995). Production of calcium carbide in a plasma-jet fluid bed reactor [Communication écrite]. 12th int. symp. on plasma chemistry, Minneapolis. Non disponible
Wang, W., Ajersch, F., & Löfvander, J. P. A. (1994). Si phase nucleation on SiC particulate reinforcement in hypereutectic Al-Si alloy matrix. Materials Science and Engineering. Part A, Structural materials: properties, microstructure and processing, 187(1), 65-75. Lien externe
Kim, G., & Ajersch, F. (1994). Surface energy and chemical characteristics of interfaces of adhesively bonded aluminium joints. Journal of Materials Science, 29(3), 676-681. Lien externe
Ajersch, F., Hayer, E., Barbier, J.-N., & Ansara, I. (1975). On the Computation of the Cd-Bi-Sb Phase Diagram. International Journal of Materials Research, 66(10), 624-628. Lien externe
