 | Monter d'un niveau |
Ait-Kadi, A., Grmela, M., Gupta, R. K., & Zmievski, V. (2003). Rheological measurements and modeling of noncolloidal particulate suspensions. Advanced Polymeric Materials, 181-208. Lien externe
Alifanti, M., Auer, R., Kirchnerová, J., Thyrion, F., Grange, P., & Delmon, B. (2003). Activity in Methane Combustion and Sensitivity to Sulfur Poisoning of La₁₋ₓCeₓMn₁₋yCoyO₃ Perovskite Oxides. Applied Catalysis. B, Environmental, 41(1-2), 71-81. Lien externe
Alifanti, M., Kirchnerová, J., & Delmon, B. (2003). Effect of Substitution by Cerium on the Activity of LaMnO₃ Perovskite in Methane Combustion. Applied Catalysis. A, General, 245(2), 231-243. Lien externe
Alonso, S., Bertrand, F., & Tanguy, P. A. (2003). A Torque-Based Analysis of the Reverse Roll Coating Process. Chemical Engineering Science, 58(9), 1831-1837. Lien externe
Ampleman, G., Brousseau, P., Thiboutot, S., Dubois, C., & Diaz, E. (2003). Insensitive melt cast explosive compositions containing energetic thermoplastic elastomers. (Brevet no US6562159). Lien externe
Arzate, A., Ascanio, G., Carreau, P. J., & Tanguy, P. A. (novembre 2003). Extensional Properties of Coating Colors at High Strain Rates [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2003), Washington, DC, USA. Lien externe
Arzate, A., Ascanio, G., Carreau, P., & Tanguy, P. A. (octobre 2003). Extensional rheology of paper coating colors at high strain rate [Communication écrite]. 75th annual meeting of the Society of Rheology, Pittsburgh, Pennsylvania, USA. Non disponible
Ascanio, G. (2003). Misting in the transfer nip a film coater [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Ascanio, G., Foucault, S., & Tanguy, P. A. (juillet 2003). New Chaotic Approach for Mixing Shear-Thinning Fluids in Stirred Tanks [Communication écrite]. 4th ASME/JSME Joint Fluids Summer Engineering Conference (FEDSM 2003), Honolulu, Hawaii, USA. Lien externe
Ascanio, G., Foucault, S., & Tanguy, P. A. (2003). Performance of a New Mixed Down Pumping Impeller. Chemical Engineering & Technology, 26(8), 908-911. Lien externe
Azzi, L., & Ajersch, F. (juin 2002). Développement des alliages à base d'aluminium pour la mise en forme à l'état semi-solide [Communication écrite]. Congrès international sur l'aluminium et sa mise en forme à chaud : moulage et formage (TRANS AL 2002), Lyon, France. Publié dans Fonderie, Fondeur d'aujourd'hui, 50(224). Non disponible
Bage, G., & Samson, R. (2003). The Econo-Environmental Return (Eer) - a Link Between Environmental Impacts and Economic Aspects in a Life Cycle Thinking Perspective. International Journal of Life Cycle Assessment, 8(4), 246-251. Lien externe
Bage, G., Samson, R., & Sinclair-Desgagne, B. (2003). A technicoeconomic approach for the selection of a site remediation strategy - Part B: Model application. Environmental Management, 31(1), 69-78. Lien externe
Bertrand, F. (janvier 2003). Modeling of granular flows in process engineering [Communication écrite]. 2003 Trends in Physical and Numerical Modeling of Multiphase Industrial Flows, Cargese, France. Non disponible
Bertrand, F., Giguere, R., & Tanguy, P. A. (juin 2003). Recent Progress on the Modeling of Complex Flows in Twin-Screw Extrusion [Communication écrite]. Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Cambridge, MA. Lien externe
Bertrand, F., Leclaire, L. A., & Levecque, G. (novembre 2003). Numerical modeling challenges in solid mixing [Communication écrite]. 2003 AIChE Annual Meeting, San Francisco, CA, USA. Non disponible
Bertrand, F., Thibault, F., Delamare, L., & Tanguy, P. A. (2003). Adaptive finite element simulations of fluid flow in twin-screw extruders. Computers & Chemical Engineering, 27(4), 491-500. Lien externe
Bui, R. T., Charette, A., Fafard, M., Soucy, G., Ajersch, F., Masounave, J., & Chiesa, F. (2003). Networked research program for aluminium production and transformation. JOM, 55(5), 43-47. Lien externe
Cheikh, F., Chavarie, C., Chaouki, J., & Ortega, R. E. (2003). Multivariable Study of Phenanthrene Adsorption in Soil-Water Systems. Ingenieria Hidraulica En Mexico, 18(2), 21-33. Non disponible
Chevrier, A., Sun, J., Hoemann, C. D., & Buschmann, M. D. (janvier 2003). Early reparative events in adult rabbits with drilled chondral defects treated with a chitosan-based implant [Communication écrite]. Transactions 9th canadian connective tissue conference, Montréal, Québec. Non disponible
Cho, B. U., Garnier, G., Perrier, M., & van de ven Theo, G. M. (janvier 2003). Parameters affecting paper formation on a pilot fourdrinier using CPAM/bentonite retention aids [Communication écrite]. International paper and coating chemistry symposium. Non disponible
Comeau, Y., Petersen, B., Stuart, P. R., Perrier, M., Graff, S., & Asselin, C. (2003). Activated Sludge Yield Reduction by the Low Sludge Production (LSP) Process: Results Are Promising. Pulp & Paper-Canada, 104(8), 40-42. Non disponible
Coursol, P., Pelton, A., & Zamalloa, M. (2003). Phase Equilibria and Thermodynamic Properties of the Cu₂O-CaO-Na₂O System in Equilibrium With Copper. Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science, 34(5), 631-638. Lien externe
Coutu, C., Martineau, G., Guy, C., & Samson, R. (2003). Characterization of an Organic Filter Medium for the Biofiltration Treatment of Air Contaminated With 1,2-Dichlorobenzene. Journal of Chemical Technology and Biotechnology, 78(8), 907-917. Lien externe
Craciun, L., Carreau, P., Heuzey, M.-C., van de Ven, T., & Moan, M. (2003). Rheological properties of concentrated latex suspensions of poly(styrene-butadiene). Rheologica Acta, 42(5), 410-420. Lien externe
Cui, H., Sauriol, P., & Chaouki, J. (2003). High temperature fluidized bed reactor: Measurements, hydrodynamics and simulation. Chemical Engineering Science, 58(3-6), 1071-1077. Lien externe
Dabros, M., Perrier, M., Forbes, F., Fairbank, M., & Stuart, P. R. (janvier 2003). Improving the broke recirculation strategy in a newsprint mill [Communication écrite]. Prepr. Pap., Annu. Meet. - Pulp Pap. Tech. Assoc. Can., 89th, Montréal, Québec. Non disponible
Davidson, D., Filion, D., Liu, H. L., Pfeffer, G., Plut, P., Buschmann, M. D., & Henderson, J. E. (janvier 2003). Interaction between FGF and integrin signalling during chondrocyte maturation [Communication écrite]. Transactions 9th canadian connective tissue conference, Montréal, Québec. Non disponible
Desaulniers, E. (2003). Modélisation de l'entassement de particules lors de procédés de couchage du papier [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Deschênes, L., Daoust, C., Balasoiu, C., & Samson, R. (avril 2002). Partitioning of Metals in Surface Soils: Influence on Ecotoxicity Assessment in the Context of Lcia [Communication écrite]. International Workshop on Life-Cycle Assessment and Metals, Montréal, Québec. Non disponible
Deslauriers, B., Antoniol, G., Merlo, E., Gossard, F., Pausova, Z., Gaudet, D., Tremblay, J., Kotchen, T., Cowley, A., & Hamet, P. (2003). Dynamic Linkage of the Angiotensin II Type I Receptor Gene Locus in Essential Hypertension: a Study of Hypertensive Families of French-Canadian Origin. American Journal of Hypertension, 16(5), A16-A16. Lien externe
Donat, V., Van De Ven, T. G. M., & Paris, J. (2003). Distribution of Dissolved and Colloidal Substances in the Forming and Press Sections of a Paper Machine. Journal of Pulp and Paper Science, 29(9), 294-298. Non disponible
Dudal, Y., Samson, R., & Deschênes, L. (2003). Rate of Contaminant Bioavailability in Artificial Soil-Water Column Experiments. Soil & Sediment Contamination, 12(6), 835-850. Lien externe
Edwards, B. J., Dressler, M., Grmela, M., & Ait-Kadi, A. (2003). Rheological Models With Microstructural Constraints. Rheologica Acta, 42(1-2), 64-72. Lien externe
Fall, C., Chaouki, J., Chavarie, C., & Elena-Ortega, R. (2003). Multivariate Study on Phenanthrene Sorption in Soils. Journal of Environmental Engineering-Asce, 129(11), 1030-1040. Lien externe
Fang, Y. L., Carreau, P., & Lafleur, P. (2003). Rheological Effects of Polyethylenes in Film Blowing. Polymer Engineering and Science, 43(7), 1391-1406. Lien externe
Favis, B. D., Rodriguez, F., & Ramsay, B. A. (2003). Polymer compositions containing thermoplastic starch. (Brevet no US6605657). Lien externe
Fécil, B. (2003). Calibration d'un modèle de production du méthane sur un lieu d'enfouissement basée sur un bilan de matière du méthane [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fécil, B., Héroux, M., & Guy, C. (octobre 2003). Development of a method for the measurement of net methane emissions from MSW landfills [Communication écrite]. 9th international waste management and landfill symposium, S. Margherita di Pula (Cagliari), Sardinia, Italy. Lien externe
Fenneteau, F., Aomari, H., Chahal, P., & Legros, R. (2003). Modeling of Scale-Down Effects on the Hydrodynamics of Expanded Bed Adsorption Columns. Biotechnology and Bioengineering, 81(7), 790-799. Lien externe
Fortier, M. (2003). Mise à l'échelle de bioréacteurs de 5 litres à 150 litres pour la culture de cellules végétales [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Fortin, M., Buschmann, M. D., Bertrand, M., Foster, F. S., & Ophir, J. (2003). Dynamic measurement of internal solid displacement in articular cartilage using ultrasound backscatter. Journal of Biomechanics, 36(3), 443-447. Lien externe
Fourmanoit, S., Bertrand, F., & Roy, R. (mai 2003). An Efficient Parallel Strategy for the Simulation of Particle Sedimentation [Communication écrite]. 17th Annual International Symposium on High Performance Computing Systems and Applications (HPCS 2003), Sherbrooke, Qc, Canada. Lien externe
Galarneau-Micone, P. (2003). Développement d'un nez électronique appliqué à l'odeur de biogaz [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Garon, M., Légaré, A., Quenneville, E., Hurtig, M. B., & Buschmann, M. D. (2003). Streaming potential based arthroscopic instrument distinguishes site-specific properties of equine articular cartilage. Transactions of the annual meeting of the orthopaedic research society, 28(255). Lien externe
Gingras, B., Guy, C., & Pagé, T. (2003). Odeurs. Dans Environnement et santé publique - fondements et pratiques (p. 499-515). Lien externe
Grmela, M. (2003). A framework for elasto-plastic hydrodynamics. Physics Letters A, 312(3-4), 136-146. Lien externe
Grmela, M., Lebon, G., & Lhuillier, D. (2003). A comparative study of the coupling of flow with non-Fickean thermodiffusion. II. GENERIC. Journal of Non-Equilibrium Thermodynamics, 28(1), 23-50. Lien externe
Guay, M., Dochain, D., & Perrier, M. (décembre 2003). Adaptative extremum seeking nonisothermal continuous stirred tank reactors with temperature constraints [Communication écrite]. IEEE conference on decision and control CDC, Maui, HI, USA. Lien externe
Harrison, R. P., & Stuart, P. R. (juin 2023). Processing of Thermo-Mechanical Pulping Data to Enhance Pca and Pls [Communication écrite]. 13th European Symposium on Computer Aided Process Engineering, Lappeenranta, Finland. Lien externe
Hashemi, S. A., Ait-Kadi, A., & Carreau, P. (2003). Effects of Surface Treatment of Kraft Wood Fibers by Polymerization Compounding on Properties of Fiber Composites. Journal of Polymer Engineering, 23(4), 281-298. Lien externe
Hayes, R. E., Bertrand, F., Audet, C., & Kolaczkowski, S. T. (2003). Catalytic combustion kinetics: using a direct search algorithm to evaluate kinetic parameters from light-off curves. Canadian Journal of Chemical Engineering, 81(6), 1192-1199. Lien externe
Hayes, R. E., Mukadi, L. S., Bertrand, F., & Audet, C. (juin 2003). Modelling and optimization of the automotive catalytic converter [Communication écrite]. 2003 CMS Summer Meeting, Edmonton, Alberta, Canada. Non disponible
Heniche, M., Reiden, M. F., & Tanguy, P. A. (2003). CFD analysis of laminar flow through KMX static mixers. NLGI Spokesman, 67, 10-18. Non disponible
Henry, O., Perrier, M., & Kamen, A. (septembre 2003). Optimization of adenovirus production in perfusion cultures using an ultrasonic retention device [Communication écrite]. 6th Conference on Protein Expression in Animal Cells, Mont-Tremblant. Non disponible
Héroux, M., Pagé, T., Gélinas, C., & Guy, C. (janvier 2003). Evaluating odour impacts from a landfilling and composting site: involving citizens in the monitoring [Communication écrite]. 2nd IWA International Workshop and Conference on Odour & VOCs, Singapore. Non disponible
Hoemann, C. D., Akens, M., Jun, S., Rossomacha, E., Shive, M. S., Buschmann, M. D., & Hurtig, M. B. (janvier 2003). Thermogelling chitosan formulation suppresses subchondral cyst formation in a cartilage repair model in sheep [Communication écrite]. American college of veterinary surgeons, Washington DC. Non disponible
Hoemann, C. D., Hurtig, M., Sun, J., McWade, D., Rossamancha, E., Shive, M. S., McKee, M. D., & Buschmann, M. D. (janvier 2003). Full-thickness cartilage repair using and injectable chitosan scaffold. BST-Car-Gel. [Communication écrite]. Engineering tissue growth, Pittsburg, USA. Non disponible
Hoemann, C. D., Hurtig, M., Sun, J., McWade, D., Rossomacha, E., Shive, M., McKee, M. D., & Buschmann, M. D. (janvier 2003). Full-thickness cartilage repair using an injectable chitosan scaffold [Communication écrite]. Transactions 9th canadian connective tissue conference, Montréal, Québec. Non disponible
Ilinca, F., Hetu, J. F., & Ajersch, F. (2003). Three-Dimensional Numerical Simulation of Turbulent Flow and Heat Transfer in a Continuous Galvanizing Bath. Numerical Heat Transfer. Part A, Applications, 44(5), 463-482. Lien externe
Jacob, A., & Paris, J. (2003). Data Sampling and Reconciliation - Application to Pulp and Paper Mills. Part 1: Methodology and Implementation. Appita Journal, 56(1), 25-+-25-+. Non disponible
Jacob, J., & Paris, J. (2003). Data Sampling and Reconciliation - Application to Pulp and Paper Mills. Part II: Case Studies. Appita Journal, 56(2), 116-121. Non disponible
Jiang, T., Chen, B., He, X., & Stuart, P. R. (2003). Application of Steady-State Detection Method Based on Wavelet Transform. Computers & Chemical Engineering, 27(4), 569-578. Lien externe
John, R. C., Pelton, A., Decterov, S., Young, A. L., Spencer, P., Thompson, W. T., Wright, I. G., & Besmann, T. M. (avril 2003). Predictions of corrosion products for alloys corroding in complex gases via thermochemical analyses [Communication écrite]. NACE-Corrosion 2003, San Diego, CA, United States. Lien externe
John, R. C., Pelton, A., Spencer, P., Young, A. L., & Thompson, W. T. (avril 2003). Alloy carburization at temperatures of 1,200 - 2,100°F (650 - 1,150°C) [Communication écrite]. Corrosion 2003, San Diego, CA, United states. Lien externe
Jolicoeur, M., Bouchard-Marchand, E., Bécard, G., & Perrier, M. (2003). Erratum: Regulation of mycorrhizal symbiosis: Development of a structured nutritional dual model. Ecological Modelling, 163(3), 247-267. Lien externe
Jung, I.-H. (2003). Critical evaluation and thermodynamic modeling of phase equilibria in multicomponent oxide systems [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Jung, I.-H., Decterov, S., & Pelton, A. (janvier 2003). Computer application of thermodynamic database to corrosion of refractories [Communication écrite]. UNITECR 2003, Osaka, Japan. Non disponible
Jung, I.-H., Decterov, S., & Pelton, A. (janvier 2003). Computer application of thermodynamic database to inclusion engineering [Communication écrite]. ISS tech 2003, Warrendale, PA, USA. Non disponible
Jung, I.-H., Decterov, S., & Pelton, A. (janvier 2003). Computer applications of thermodynamic databases to corrosion of refractories [Communication écrite]. UNITECR'2003 Congress, Osaka, Japon. Non disponible
Jung, I.-H., Decterov, S., & Pelton, A. Computer applications of thermodynamic databases to inclusion engineering [Communication écrite]. ISSTech 2003 Conference volume for Ironmaking. Non disponible
Jurvelin, J. S., Buschmann, M. D., & Hunziker, E. B. (2003). Mechanical anisotropy of the human knee articular cartilage in compression. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine, 217(3), 215-219. Lien externe
Kamen, A., Henry, O., Jacob, D., & Bernier, A. (mai 2003). Successful development of a robust adenovirus production process primarily relies on a better understanding of packaging cell line physiology and vector replication kinetics [Communication écrite]. 18th ESACT Meeting, Granada, Spain. Lien externe
Kay, D., Carreau, P., Lafleur, P., Robert, L., & Vergnes, B. (2003). A Study of the Stick-Slip Phenomenon in Single-Screw Extrusion of Linear Polyethylene. Polymer Engineering and Science, 43(1), 78-90. Lien externe
Kirchnerova, J., & Klvana, D. (2003). Performance of La₁₋ₓSrₓAl₁₋y₋y' FeyMgy'O₃-Delta Perovskites in Methane Combustion: Effect of Aluminum and Magnesium Content. Catalysis Today, 83(1-4), 233-238. Lien externe
Klvana, D., Kirchnerova, J., Chaouki, J., & Courbariaux, Y. Auto cyclic reactor for catalytic combustion of lean mixtures of solvent vapors or hydrocarbons : limits of its autothermic operation [Communication écrite]. Combustion Canada 2003 Conference. Non disponible
Labour, K., Jolicoeur, M., & St-Arnaud, M. (2003). Arbuscular Mycorrhizal Responsiveness of in Vitro Tomato Root Lines Is Not Related to Growth and Nutrient Uptake Rates. Canadian Journal of Botany, 81(7), 645-656. Lien externe
Laflamme-Mayer, M., Bellec, S., Gaudreault, C., Thibodeau, J.-B., & Stuart, P. R. (janvier 2003). Techno-economic evaluation of emerging sludge management options at a newsprint mill with activated sludge treatment [Communication écrite]. Prepr. Pap., Annu. Meet. - Pulp Pap. Tech. Assoc. Can., 89th, Montréal, Québec. Non disponible
Lafourcade, S., Labidi, J., Koteles, R., Gelinas, C., & Stuart, P. R. (2003). Thermal Pinch Analysis With Process Streams Mixing at a Tmp-Newsprint Mill. Pulp & Paper-Canada, 104(12), 74-77. Non disponible
Lama, I., Perrier, M., & Stuart, P. R. (2003). Applying Controllability Techniques to Analyze a White Water Network for Improved Productivity in Integrated Newsprint Mills. Resources Conservation and Recycling, 37(3), 181-192. Lien externe
Lamboursain, L., & Jolicoeur, M. In Vitro Production of Secondary Metabolites by Cultivated Plant Cells: the Crucial Role of the Cell Nutritional Status [Communication écrite]. Plant Biotechnology 2002 and Beyond. Lien externe
Langelier, A., & Buschmann, M. D. (2003). Increasing strain and strain-rate strengthens transient stiffness but weakens the response to subsequent compression for articular cartilage in unconfined compression. Journal of Biomechanics, 36(6), 853-859. Lien externe
Larachi, F., Grandjean, B. P. A., & Chaouki, J. (2003). Mixing and Circulation of Solids in Spouted Beds: Particle Tracking and Monte Carlo Emulation of the Gross Flow Pattern. Chemical Engineering Science, 58(8), 1497-1507. Lien externe
Lavertu, M., Xia, Z., Serreqi, A. N., Berrada, M., Rodrigues, A., Wang, D., Buschmann, M. D., & Gupta, A. (2003). A validated ¹H NMR method for the determination of the degree of deacetylation of chitosan. Journal of pharmaceutical and biomedical analysis, 32(6), 1149-1158. Lien externe
Lebon, G., Grmela, M., & Lhuiller, D. (2003). Comparative study of the coupling of flow with non-fickean thermodiffusion, I, Extended irreversible thermodynamics. Journal of Non-Equilibrium Thermodynamics, 28(1), 1-22. Lien externe
Lessard, D. G., Ousalem, M., Zhu, X. X., Eisenberg, A., & Carreau, P. (2003). Study of the Phase Transition of Poly(N,N-Diethylacrylamide) in Water by Rheology and Dynamic Light Scattering. Journal of Polymer Science. Part B: Polymer Physics, 41(14), 1627-1637. Lien externe
Lhuillier, D., Grmela, M., & Lebon, G. (2003). A Comparative Study of the Coupling of Flow With Non-Fickean Thermodiffusion. Part III: Internal Variables. Journal of Non-Equilibrium Thermodynamics, 28(1), 51-68. Lien externe
Li, L. P., Buschmann, M. D., & Shirazi-Adl, A. (2003). Strain-Rate Dependent Stiffness of Articular Cartilage in Unconfined Compression. Journal of Biomechanical Engineering, 125(2), 161-168. Lien externe
Li, L. P., Shirazi-Adl, A., & Buschmann, M. D. (2003). Investigation of Mechanical Behavior of Articular Cartilage by Fibril Reinforced Poroelastic Models. Biorheology, 40(1-3), 227-233. Lien externe
Locas, M.-C. (2003). Étude sur la modélisation dynamique générale d'un système de croissance de cellules d'insecte Spodoptera frugiperda (Sf-9) [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Lozano, T., Lafleur, P., Grmela, M., & Vergnes, B. (2003). Modeling Filler Dispersion Along a Twin-Screw Extruder. International Polymer Processing, 18(1), 12-19. Lien externe
Messaoud, F., Azzi, L., & Ajersch, F. Rheological Characteristics of Az91e Alloys in Semi-Solid State [Communication écrite]. Aluminum 2003. Non disponible
Mmbaga, J. P., Hayes, R. E., Huijben, C. A., Bertrand, F., & Tanguy, P. A. (janvier 2003). Simulation and analysis of metered size press coating flow [Communication écrite]. 53th CSChE Annual Conference, Hamilton, ON, Canada. Non disponible
Mostoufi, N., Kennedy, G. G., & Chaouki, J. (2003). Decreasing the Sampling Time Interval in Radioactive Particle Tracking. Canadian Journal of Chemical Engineering, 81(1), 129-133. Lien externe
Ouellet, N. (2003). Estimation en temps réel de la conductivité hydraulique non saturée au cours d'une infiltration d'eau à travers un sol [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Ouellet, N., Perrier, M., & Bertrand, F. (janvier 2003). An on-line estimator for the non-saturated hydraulic conductivity characterizing water infiltration into soil [Communication écrite]. 53th CSChE Annual Conference, Hamilton, ON, Canada. Non disponible
Paquin, M.-P. (2003). Caractérisation du comportement de l'étain dans le procédé de volatisation du zinc [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Pelton, A., & Bale, C. W. (2003). Rebuttal to "Comments on the Li-Sr System" by F.e. Wang [Commentaire ou lettre]. Journal of Phase Equilibria, 24(4), 305-306. Lien externe
Piche, M., Pelton, A., & Brochu, C. (mai 2003). A Thermodynamic Database for Magnesium Alloys [Communication écrite]. Magnesium Technology TMS Meeting 2003, San Diego. Non disponible
Pudge, I. B., Daugulis, A. J., & Dubois, C. (2003). Use of Enterobacter cloacae ATCC 43560 in the development of a two-phase partitioning bioreactor for the destruction of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Journal of Biotechnology, 100(1), 65-75. Lien externe
Pugsley, T., Tanfara, H., Malcus, S., Cui, H., Chaouki, J., & Winters, C. (2003). Verification of Fluidized Bed Electrical Capacitance Tomography Measurements With a Fibre Optic Probe. Chemical Engineering Science, 58(17), 3923-3934. Lien externe
Quenneville, E., Garon, M., Légaré, A., & Buschmann, M. D. Load and streaming potential responses of articular cartilage as a function of compression speed during indentation [Affiche]. 49th Annual Meeting of the Orthopaedic Research Society, Chicago, IL (1 page). Publié dans Transactions of the annual meeting of the orthopaedic research society, 28(659). Lien externe
Quenneville, E., Légaré, A., Garon, M., Hurtig, M. B., & Buschmann, M. D. (janvier 2003). New arthroscopic device for functional mapping of articular cartilage [Communication écrite]. Transactions 9th canadian connective tissue conference, Montréal, Québec. Non disponible
Reignier, J., & Favis, B. D. (2003). Core-Shell Structure and Segregation Effects in Composite Droplet Polymer Blends. AICHE Journal, 49(4), 1014-1023. Lien externe
Reignier, J., & Favis, B. D. (2003). On the presence of a critical shell volume fraction leading to pseudo-pure droplet behavior in composite droplet polymer blends. Polymer, 44(18), 5061-5066. Lien externe
Reignier, J., Favis, B. D., & Heuzey, M.-C. (2003). Factors Influencing Encapsulation Behavior in Composite Droplet-Type Polymer Blends. Polymer, 44(1), 49-59. Lien externe
Renou, S., Perrier, M., Dochain, D., & Gendron, S. (2003). Solution of the convection-dispersion-reaction equation by a sequencing method. Computers & Chemical Engineering, 27(5), 615-629. Lien externe
Riscanu, D. (2003). La préparation de membranes microporeuses à partir de mélanges de polymères immiscibles à morphologie cocontinue [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Robelin, C., Chartrand, P., & Pelton, A. (mai 2003). A thermodynamic model for AlCl₃-based molten salt systems [Présentation]. Dans CALPHAD XXXII, La Malbaie, Quebec, Canada,. Non disponible
Rodriguez-Gonzalez, F. J., Ramsay, B. A., & Favis, B. D. (2003). High performance LDPE/thermoplastic starch blends: A sustainable alternative to pure polyethylene. Polymer, 44(5), 1517-1526. Lien externe
Rodriguez-Gonzalez, F. J., Virgilio, N., Ramsay, B. A., & Favis, B. D. (2003). Influence of Melt Drawing on the Morphology of One- and Two-Step Processed Ldpe/Thermoplastic Starch Blends. Advances in Polymer Technology, 22(4), 297-305. Lien externe
Sarazin, P. (2003). Substrats poreux biodégradables préparés à partir de phases co-continues dans les mélanges de polymères immiscibles [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Sarazin, P., & Favis, B. D. (2003). Morphology Control in Co-Continuous Poly(L-Lactide)/Polystyrene Blends: a Route Towards Highly Structured and Interconnected Porosity in Poly(L-Lactide) Materials. Biomacromolecules, 4(6), 1669-1679. Lien externe
Sarazin, P., Virgilio, N., & Favis, B. D. (septembre 2003). Morphology control in co-continuous poly(L-lactide)/polystyrene blends : a route towards highly structured and interconnected porosity in poly(L-lactide) materials [Communication écrite]. PPS 2003 Europe-Africa Meeting of the Polymer Processing Society, Athens, Greece. Non disponible
Savarmand, S., Carreau, P., Bertrand, F., Vidal, D., & Moan, M. (2003). Rheological properties of concentrated aqueous silica suspensions: effects of pH and ions content. Journal of Rheology, 47(5), 1133-1149. Lien externe
Savarmand, S., Carreau, P., Bertrand, F., Vidal, J. E., & Moan, M. (2003). Rheological properties of concentrated aqueous silica suspensions : effects of pH and ions content. (Rapport technique n° Report 837). Non disponible
Schoefs, O., Dochain, D., Chapuis, R. P., Samson, R., & Perrier, M. (août 2003). Identification and On-Line Estimation of the Unsaturated Hydraulic Conductivity in Presence of Forced Air Convection Based on a Distributed-Parameter Model [Communication écrite]. 13th IFAC Symposium on System Identification (SYSID 2003), Rotterdam, The Netherlands. Publié dans IFAC Proceedings, 36(16). Lien externe
Schoefs, O., Dochain, D., Perrier, M., & Samson, R. (2003). Estimation of the Hydrodynamic and Biokinetic Models of Soil Bioremediation Processes. Chemical Engineering Research & Design, 81(9), 1279-1288. Lien externe
Schoefs, O., Perrier, M., Dochain, D., & Samson, R. (2003). On-Line Estimation of Biodegradation in an Unsaturated Soil. Bioprocess and Biosystems Engineering, 26(1), 37-48. Lien externe
Schreiber, H. P. (2003). Probe Selection and Description in Igc: a Nontrivial Factor. Journal of Applied Polymer Science, 89(9), 2323-2330. Lien externe
Schreiber, H. P., & Ouhlal, A. (2003). Polymer Diffusion and the Evolution of Adhesive Bond Strength. Journal of Adhesion, 79(2), 141-153. Lien externe
Sepehr, M. (2003). Étude rhéologique des composites chargés de fibres de verre courtes [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Shafiei, S., Floquet, P., Davin, A., Domenech, S., & Paris, J. (juin 2003). Whitewater network optimization in pulp & paper industry [Communication écrite]. IcheaP 6 : 6th Italian conference on chemical and process engineering, Pisa, Italy. Non disponible
Sherritt, R. G., Chaouki, J., Mehrotra, A. K., & Behie, L. A. (2003). Axial Dispersion in the Three-Dimensional Mixing of Particles in a Rotating Drum Reactor. Chemical Engineering Science, 58(2), 401-415. Lien externe
Sotudeh-Gharebagh, R., & Chaouki, J. (2003). The Heterogeneous and Homogeneous Combustion of Methane Over Inert Particles. Canadian Journal of Chemical Engineering, 81(6), 1182-1191. Lien externe
Sotudeh-Ghareh, R., & Chaouki, J. (2003). Development of a clean fluidized bed reactor for food-grade CO₂ production. International Energy Journal, 4(1), 41-52. Lien externe
Swamy, V., Decterov, S., & Pelton, A. (2003). Thermodynamic Assessment of the Ge-Si-O-Cl-H System. Glass Science and Technology, 76(2), 62-70. Non disponible
Swamy, V., Dubrovinsky, L. S., Dubrovinskaia, N. A., Simionovici, A. S., Drakopoulos, M., Dmitriev, V., & Weber, H.-P. (2003). Compression behavior of nanocrystalline anatase TiO₂. Solid State Communications, 125(2), 111-115. Lien externe
Vidal, D., Desaulniers, E., Leclaire, L. A., & Bertrand, F. (juin 2003). Recent progress and challenges in the numerical modeling of coating structures [Communication écrite]. 5th International Paper and Coating Chemistry Symposium, Montréal, Qc, Canada. Non disponible
Wills, A. G., Heath, W. P., & Perrier, M. (2003). Commande prédictive linéaire: application au raffinage d'huiles alimentaires. Dans Flaus, J.-M., & Boillereaux, L. (édit.), Automatique des procédés agro-alimentaire (Vol. 2, p. 21-43). Non disponible
Woodward, L. (2003). Optimisation en temps réel d'un système de distribution de gaz [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Zagury, G. J., Samson, R., & Deschênes, L. (2003). Occurrence of Metals in Soil and Ground Water Near Chromated Copper Arsenate-Treated Utility Poles. Journal of Environmental Quality, 32(2), 507-514. Lien externe
