 | Monter d'un niveau |
Abdali, H., & Ajji, A. (avril 2014). Antibacterial properties of electrospun fibers of PCL/clove bud powder [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Ajji, A. (2014). Interphase and compatibilization by addition of a compatibilizer. Dans Utracki, L. A., & Wilkie, C. A. (édit.), Polymer Blends Handbook (2e éd., 447-516). Lien externe
Binan, L., Ajji, A., De Crescenzo, G., & Jolicoeur, M. (2014). Approaches for Neural Tissue Regeneration. Stem Cell Reviews and Reports, 10(1), 44-59. Lien externe
Binan, L., Tendey, C., De Crescenzo, G., El Ayoubi, R., Ajji, A., & Jolicoeur, M. (2014). Differentiation of neuronal stem cells into motor neurons using electrospun poly-L-lactic acid/gelatin scaffold. Biomaterials, 35(2), 664-674. Lien externe
Boutrouka, R., Tabatabaei, S. H., & Ajji, A. (avril 2014). Effect of molecular structure on the heat seal performance of polypropylene films [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). Rheological, crystal structure, barrier, and mechanical properties of PA6 and MXD6 nanocomposite films. Polymer Engineering and Science, 54(11), 2617-2631. Lien externe
Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2014). X-ray and Trichroic Infrared Orientation Analyses of Uniaxially Stretched PA6 and MXD6 Nanoclay Composite Films SO MACROMOLECULES VL 47 IS 7 BP 2384 EP 2395 DI 10.1021/ma402466c PD APR 8 2014 PY 2014 TC 2 ZB 0. Macromolecules, 47(7), 2384-2395. Lien externe
Jezierski, A., Rennie, K., Zurakowski, B., Ribecco-Lutkiewicz, M., Haukenfrers, J., Ajji, A., Gruslin, A., Sikorska, M., & Bani-Yaghoub, M. (2014). Neuroprotective Effects of GDNF-expressing Human Amniotic Fluid Cells. Stem Cell Reviews and Reports, 10(2), 251-268. Lien externe
Kolahchi, A. R., Ajji, A., & Carreau, P. (2014). Surface Morphology and Properties of Ternary Polymer Blends: Effect of the Migration of Minor Components. Journal of Physical Chemistry B, 118(23), 6316-6323. Lien externe
Kolahchi, A. R., Carreau, P., & Ajji, A. (2014). Surface Roughening of PET Films through Blend Phase Coarsening. ACS Applied Materials & Interfaces, 6(9), 6415-6424. Lien externe
Matet, M., Heuzey, M.-C., & Ajji, A. (2014). Morphology and antibacterial properties of plasticized chitosan/metallocene polyethylene blends. Journal of Materials Sciences, 49(15), 5427-5440. Lien externe
Mighri, F., Duong, V. T. T., On, D. T., & Ajji, A. (juillet 2013). Synthesis of capped TiO2 nanocrystals of controlled shape and their use with MEH-PPV conjugated polymer to develop nanocomposite films for photovoltaic applications [Communication écrite]. 29th International Conference of the Polymer Processing Society (PPS 2013), Nuremberg, Germany. Lien externe
Moayeri, A., & Ajji, A. (novembre 2013). Preparation of graphene based nanocomposites in electrospun polyaniline/polyethylene oxide blends [Communication écrite]. Nanoscale Science and Engineering Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, San Francisco, CA, United states. Non disponible
Najarzadeh, Z., & Ajji, A. (avril 2014). Effect of seal process parameters on final seal strength behavior for LLDPE [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Non disponible
Najarzadeh, Z., & Ajji, A. (octobre 2014). Effect of seal process parameters on final seal strength behavior for LLDPE (FlexPackCon-Science of Sealing) [Communication écrite]. Web Coating and Handling Conference, Myrtle Beach, SC. Non disponible
Najarzadeh, Z., & Ajji, A. (2014). A novel approach toward the effect of seal process parameters on final seal strength and microstructure of LLDPE. Journal of Adhesion Science and Technology, 28(16), 1592-1609. Lien externe
Najarzadeh, Z., Tabasi, R. Y., & Ajji, A. (2014). Sealability and seal characteristics of PE/EVA and PLA/PCL blends. International Polymer Processing, 29(1), 95-102. Lien externe
Patel, J. D., Mighri, F., & Ajji, A. (2014). A facile route towards the preparation of ZnSe nanocrystals. Materials Letters, 131, 366-369. Lien externe
Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Facile synthesis of CdSe nanocrystals for bulk-heterojunction solar cells. Journal of Materials Science: Materials in Electronics, 25(9), 4051-4057. Lien externe
Patel, J., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2014). Solution processed approaches for bulk-heterojunction solar cells based on Pb and Cd chalcogenide nanocrystals. Nano Energy, 5, 36-51. Lien externe
Patel, J., Mighri, F., Ajji, A., Tiwari, D., & Chaudhuri, T. K. (2014). Spin-coating deposition of PbS and CdS thin films for solar cell application. Applied Physics A: Materials Science and Processing, 117(4), 1791-1799. Lien externe
Rokbani, H., & Ajji, A. (avril 2014). Antimicrobial activity of PCL/ZnO electrospun nanofibers [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Non disponible
Sadeghi, F., & Ajji, A. (2014). Application of single site catalyst metallocene polyethylenes in extruded films: Effect of molecular structure on sealability, flexural cracking and mechanical properties. Canadian Journal of Chemical Engineering, 92(7), 1181-1188. Lien externe
Sadeghi, F., & Ajji, A. (2014). Effect of molecular structure on seal ability, flex crack and mechanical properties of linear low-density polyethylene films. Journal of Plastic Film and Sheeting, 30(1), 91-111. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer Engineering and Science, 55(14), 3156-3167. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Katnal, M. R. (avril 2014). Development of polypropylene microporous hydrophilic membranes by blending with acrylic acid grafted polypropylene [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. Lien externe
Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. Lien externe
Savoji, H., Hadjizadeh, A., Maire, M., Ajji, A., Wertheimer, M. R., & Lerouge, S. (2014). Electrospun nanofiber scaffolds and plasma polymerization: A promising combination towards complete, stable endothelial lining for vascular grafts. Macromolecular Bioscience, 14(8), 1084-1095. Lien externe
Silverwood, R. J., Tabatabae, H., & Ajji, A. (octobre 2014). Peelable-resealable films: FTIR characterisation and peel strength [Communication écrite]. Web Coating and Handling Conference, Myrtle Beach, SC. Lien externe
Tazi, M., Erchiqui, F., Godard, F., Kaddami, H., & Ajji, A. (2014). Characterization of rheological and thermophysical properties of HDPE-wood composite. Journal of Applied Polymer Science, 131(13). Lien externe
Vu, T. T. D., Mighri, F., Ajji, A., & Do, T.-O. (2014). Synthesis of titanium dioxide/cadmium sulfide nanosphere particles for photocatalyst applications. Industrial and Engineering Chemistry Research, 53(10), 3888-3897. Lien externe
Zohrevand, A., Ajji, A., & Mighri, F. (2014). Microstructure and properties of porous nanocomposite films: Effects of composition and process parameters. Polymer International, 63(12), 2052-2060. Lien externe
Zohrevand, A., Ajji, A., & Mighri, F. (2014). Morphology and properties of highly filled iPP/TiO2 nanocomposites. Polymer Engineering and Science, 54(4), 874-886. Lien externe
Zohrevand, A., Ajji, A., & Mighri, F. (2014). Relationship between rheological and electrical percolation in a polymer nanocomposite with semiconductor inclusions. Rheologica Acta, 53(3), 235-254. Lien externe
