 | Monter d'un niveau |
Abda, M., & Gosselin, F. (mai 2023). Time-invariant hp-variational physics informed neural network to solve the pipe conveying fluid equation [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Berthet, L., Karbasian, H. R., Blais, B., & Gosselin, F. (mai 2023). Physics-informed neural network-based modeling of the static reconfiguration of a plate under fluid flow [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Bidhendi, A. J., Lampron, O., Gosselin, F., & Geitmann, A. (2023). Cell geometry regulates tissue fracture. Nature Communications, 14(1), 8275 (13 pages). Lien externe
Brzeski, D., Hia, I. L., Chauvette, J.-F., Dermanaki Farahani, R., Piccierelli, N., Ross, A., & Therriault, D. (juillet 2023). Development of a novel abradable composite for the 3d printing of micro-scaffolds [Présentation]. Dans 23rd International Conference on Composite Materials (ICCM-23), Belfast, United Kingdom. Non disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., Plante, R., Piccirelli, N., & Therriault, D. (2023). Non-planar multinozzle additive manufacturing of thermoset composite microscaffold networks. Composites Part B: Engineering, 256, 110627 (11 pages). Lien externe
Chauvette, J.-F., Hia, I. L., Pierre, J., Chenier, G., Farahani, R. D., Piccirelli, N., & Therriault, D. (2023). Non-planar multiprocess additive manufacturing of multifunctional composites. Advanced Materials Technologies, 8(17), 2300399 (10 pages). Disponible
Collet, L., Rodrigues da Silveira, S., Kierzkowski, D., Routier-Kierzkowska, A.-L., & Gosselin, F. (mai 2023). Unveiling of tissue-level forces in plants using finite elements [Communication écrite]. Canadian Society for Mechanical Engineering International Congress, Sherbrooke, QC, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Costa-Baptista, J., Fotsing, E. R., Mardjono, J., Therriault, D., & Ross, A. (2023). Hybrid acoustic materials through assembly of tubes and microchannels: design and experimental investigation. Rapid Prototyping Journal, 29(6), 1230-1239. Disponible
Demenois, M., Miao, H., & Gosselin, F. (2023). Easy to build, modular and large scale pipe conveying fluid experimental setup. HardwareX, 15, e00460 (30 pages). Disponible
Dollon, Q., Ghorbani, E., & Gosselin, F. (mai 2023). Bayesian-based system identification of a tilting pad journal bearing under colored excitation [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Garon, J., Routier, A.-L., Mélançon, D., & Gosselin, F. (mai 2023). Morphogenesis through mechanical instabilities : wrinkles and ruffles formation during the growth of kelp blades [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Ghorbani, E., Rishmawi, S., & Gosselin, F. (mai 2023). A hybrid Kalman filtering and proper generalized decomposition algorithm for real-time identification of partial differential governing equation systems [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Jean, R. J. M., Braun, O., Monnette, C., Nennemann, B., & Gosselin, F. (mai 2023). Acoustic-structure interaction in disk-disk configurations in water for high head pump-turbines [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Labzour, O. T., Karbasian, H. R., Houde, S., & Gosselin, F. (mai 2023). Combining reduced-order modeling and PINNs to model fluid-structure interactions [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Lamoureux, D., Audefroy, C., Tazi-Labzour, O., Houde, S., & Gosselin, F. (mai 2023). Evaluating flow-added damping of hydrofoils by combining vibro-acoustics and doublet-lattice panel analyses [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Lampron, O., Lingua, A., Therriault, D., & Lévesque, M. (2023). Characterization of the non-isotropic tensile and fracture behavior of unidirectional polylactic acid parts manufactured by material extrusion. Additive Manufacturing, 61, 103369 (12 pages). Lien externe
Lampron, O., Therriault, D., & Lévesque, M. (2023). Phase-field modeling of fracture in fused filament fabricated thermoplastic parts and experimental validation. Engineering Fracture Mechanics, 292, 109667 (19 pages). Lien externe
Le Gentil, T., Langot, J., Therriault, D., & Kerbrat, O. (mai 2023). Identifying efficient solutions for additive manufacturing of short carbon-fiber reinforced polyamide 6 from energy and mechanical perspectives [Communication écrite]. 30th CIRP Life Cycle Engineering Conference, New Brunswick, NJ. Publié dans Procedia CIRP, 116. Disponible
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (juillet 2023). Mesoscale full-field measurements for 3D-printed composites under delamination [Présentation]. Dans 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Non disponible
Lingua, A., Sosa-Rey, F., Pautard, S., Therriault, D., & Lévesque, M. (2023). Multiscale characterization of the fracture mechanics of additively manufactured short fiber-reinforced composites. Engineering Fracture Mechanics, 289, 109343 (19 pages). Disponible
Moeini, M., Yue, L., Begon, M., & Lévesque, M. (2023). Surrogate optimization of a lattice foot orthotic. Computers in Biology and Medicine, 155, 106376 (20 pages). Lien externe
Pierre, J., Chenier, G., Verville, M., Chauvette, J.-F., Dermanaki Farahani, R., Piccirelli, N., & Therriault, D. (juillet 2023). Additive Manufacturing Of A Non-planar Multifunctional Sandwich Panel [Affiche]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom (1 page). Lien externe
Pierre, J., Iervolino, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023). Material extrusion additive manufacturing of multifunctional sandwich panels with load-bearing and acoustic capabilities for aerospace applications. Additive Manufacturing, 61, 103344 (10 pages). Disponible
Rishmawi, S., Rodríguez, S., Gosselin, F., & Chinesta, F. (mai 2023). Hybrid MB-DEIM approach for parametrized nonlinear dynamics of a vertical axis rotating machine [Communication écrite]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada (1 page). Publié dans Progress in Canadian Mechanical Engineering, 3. Lien externe
Serroud, S., Ghorbani, E., & Gosselin, F. (mai 2023). Design of a vertical axis rotating machine test-bench and numerical modelling [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Sosa-Rey, F., Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Thermo-viscoelastic multiscale homogenization of additively manufactured short fiber reinforced polymers from direct microstructure characterization. International Journal of Solids and Structures, 281, 13 pages. Lien externe
Sosa-Rey, F., Vella, C., Lingua, A., Pierre, J., Piccirelli, N., Therriault, D., & Lévesque, M. (2023). Multiscale Fast Fourier Transform homogenization of additively manufactured fiber reinforced composites from component-wise description of morphology. Composites Science and Technology, 243, 110261 (16 pages). Lien externe
Sushitskii, V., van Rees, W. M., Lévesque, M., & Gosselin, F. (2023). Determination of Optimal Shot Peen Forming Patterns Using the Theory of Non-Euclidean Plates. Journal of Manufacturing Science and Engineering-Transactions of the Asme, 145(3), 031006 (15 pages). Lien externe
Trofimov, A., Ravey, C., Droz, N., Therriault, D., & Lévesque, M. (2023). A review on the Representative Volume Element-based multi-scale simulation of 3D woven high performance thermoset composites manufactured using resin transfer molding process. Composites Part A: Applied Science and Manufacturing, 169, 107499 (17 pages). Disponible
Trofimov, A., Tuloup, C., Le Pavic, J., Ravey, C., Therriault, D., & Lévesque, M. (2023). Multi-scale modeling of process-induced pressure distribution inside 3D woven composites manufactured using Resin Transfer Molding. Composites Part a-Applied Science and Manufacturing, 165, 107307 (15 pages). Lien externe
Tuloup, C., Trofimov, A., Ravey, C., Droz, N., Lévesque, M., & Therriault, D. (juillet 2023). An in-situ pressure evaluation tool for 3d-woven composites manufactured by resin transfer molding [Présentation]. Dans 23rd International Conference on Composite Materials (ICCM-23), Belfast, United Kingdom. Non disponible
Yan Miao, H., Lévesque, M., & Gosselin, F. (2023). Eigenstrain-based analysis of why uniformly shot peened aluminium plates bend more in the rolling direction. Strain, 22 pages. Lien externe
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2023). Processing and properties of aqueous protein/polysaccharide mixture-based inks for additive manufacturing. Additive Manufacturing, 78, 103844 (12 pages). Lien externe
