 | Monter d'un niveau |
Abreal, A., Goeuriot, D., Thevenot, F., Lagacé, M., Gueroult, B., & Rigaud, M. (1995). Effect of Y₂O₃ addition on alumina-hex boron nitride composites. Journal of the European Ceramic Society, 15(9), 841-849. Lien externe
Abréal, A., Goeuriot, D., Thévenot, F., Lagacé, M., & Rigaud, M. (1994). Alumina-hexagonal boron nitride composites: effects of yttrium and neodynium oxides. Japanese Journal of Applied Physics. series 10, 226-227. Non disponible
Allaire, C., Rigaud, M., & Dallaire, S. (1989). Basic Phosphate-Bonded Castables from Dolomitic-Magnesite Clinkers. Journal of the American Ceramic Society, 72(9), 1698-1703. Lien externe
Braulio, M. A. L., Rigaud, M., Buhr, A., Parr, C., & Pandolfelli, V. C. (2011). Spinel-containing alumina-based refractory castables. Ceramics International, 37(6), 1705-1724. Lien externe
Balamurugan, K., Sankaranarayanane, K., Zhou, X., & Rigaud, M. (2007). Rheology of steel fibre containing alumina-magnesia-extruded graphite pellets self-flowing castables. China's Refractories, 16(2), 11-16. Lien externe
Bennett, J. P., Kwong, K.-S., Oprea, G., Rigaud, M., & Winder, S. M. (2005). Performance of refractories in severe environment. Dans ASM handbook. Volume 13 B, Corrosion : materials (547-564). Lien externe
Brisson, P. Y., Paransky, E., & Rigaud, M. (2003). Effects of Andalusite Grain Size on Microstructure and Mechanical Properties of Low Cement Alumina-Based Castables. Canadian Metallurgical Quarterly, 42(2), 157-165. Lien externe
Baudson, H., Debucquoy, F., Huger, M., Gault, C., & Rigaud, M. (1999). Ultrasonic measurement of young's modulus MgO/C refractories at high temperature. Journal of the European Ceramic Society, 19(10), 1895-1901. Lien externe
Bradt, R. C., Brosnan, D. A., Crowley, M. S., Rigaud, M., & Semler, C. E. (novembre 1997). Refractories education by short courses/seminars [Communication écrite]. UNITCER '97, New-Orleans, La, USA. Non disponible
Balmori-Ramirez, H., Jaramillo-Vigueras, D., & Rigaud, M. (1995). Microstructure of Al₂O₃-PSZ(MgO) composites. Journal of Materials Science Letters, 14(8), 603-605. Lien externe
Bailon, J.-P., Dorlot, J.-M., Masounave, J., Rigaud, M., & Haenny, L. (1980). Des matériaux. Non disponible
Bale, C. W., Pelton, A., & Rigaud, M. (1977). The Measurement and Analytical Computation of Thermochemical Properties in a Quaternary System — Zn-Cd-Bi-Sn. International Journal of Materials Research, 68(1), 69-74. Lien externe
Cherif, K., Palco, S., Paransky, E., & Rigaud, M. (juin 2023). Testing Alkalies Attack Onto Basic Refractories [Communication écrite]. 8th European Ceramic Society. Conference, Istanbul, Turkey. Publié dans Key Engineering Materials, 264-268. Lien externe
Cherif, K., Palco, S., & Rigaud, M. (2003). Nouvelle approche pour l'étude de l'interaction réfractaires alcalins dans les fours à ciment. Silicates Industriels (3-4), 37-44. Non disponible
Cherif, K., Palco, S., Guo, Z., & Rigaud, M. (septembre 2001). Alkalies and Cement Clinker Reactions on Basic Refractories [Communication écrite]. 7th Conference and Exhibition of the European Ceramic Society, Brugge, Belgium.. Publié dans Key Engineering Materials, 206-213(3). Lien externe
Cherif, K., Gueroult, B., & Rigaud, M. (1997). Al ₂O₃ -ZrO₂ debris life cycle during wear: effects of the third body on wear and friction. Wear, 208(1-2), 161-168. Lien externe
Cherif, K., Pandolfelli, V., & Rigaud, M. (1997). Factors affecting the corrosion by fayalite slags and the thermal shock resistance of magnesia-chrome bricks. Canadian Ceramic Quarterly, 66(3), 210-216. Non disponible
Cherif, K., Gueroult, B., & Rigaud, M. (1996). Wear behaviour of alumina toughened zirconia materials. Wear, 199(1), 113-121. Lien externe
de Souza, E. L. P., Rigaud, M., & Paransky, E. (novembre 2004). Cathodoluminescence, part 2 - evaluation of cathodoluminescent method for post-mortem studies of magnesia spinel bricks used in rotary cement kilns [Communication écrite]. 32nd congress Alafar, Antigua, Guatemala. Non disponible
de Souza, E. L. P., Rigaud, M., & Paransky, E. (novembre 2004). Introduction to cathodoluminescence, part 1 [Communication écrite]. 32nd congress Alafar, Antigua, Guatemala. Non disponible
Divry, E., Paransky, E., & Rigaud, M. (janvier 2004). Laboratory methods to characterize mold fluxes [Communication écrite]. Iron and steel technology conference (AISTech 2004). Non disponible
Divry, E., Paransky, E., & Rigaud, M. (août 2002). Characterization of continuous casting mold fluxes [Communication écrite]. International Symposium on Ladle and Tundish Metallurgy, Montréal, Québec. Non disponible
Divry, E., Paransky, E., & Rigaud, M. (mars 2002). Continuous casting mold fluxes characterization [Communication écrite]. 38th symposium on refractories, Chesterfield, Missouri. Non disponible
Debucquoy, F., Baudson, H., Huger, M., Gault, C., & Rigaud, M. (1997). High temperature elasticity of mgo/c refractories. Keys Engineering Materials, 132-136(3), 1842-1845. Lien externe
Fangbao, Y., Rigaud, M., Liu, X., & Zhong, X. C. (2003). Rheological behavior of the matrixes of bauxite-based castables. China's Refractories, 12, 7-12. Lien externe
Fangbao, Y., Rigaud, M., & Zhong, X. C. (mars 2003). Rheological behavior of the matrixes of bauxite-based SiC-containing castables [Communication écrite]. 4th international symposium on refractories, Dalian, China. Publié dans China's refractories, (3). Non disponible
Fangbao, Y., Rigaud, M., & Zhong, X. (2000). Oxidation and corrosion resistance of magdoloma-carbon refractories with boron bearing additives. Canadian Ceramics Society Journal, 69(2), 23-26. Non disponible
Feng, C., & Rigaud, M. (août 1999). Melting behavior and performance of mold powders for continuous casting [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible
Guo, Z., Ma, Y., & Rigaud, M. (2020). Sinterability of macrocrystalline and cryptocrystalline magnesite to refractory magnesia. International Journal of Ceramic Engineering & Science, 2(6), 303-309. Disponible
Guo, Z., Palco, S., & Rigaud, M. (2005). Bonding of cement clinker onto doloma-based refractories. Journal of the American Ceramic Society, 88(6), 1481-1487. Lien externe
Guo, Z., Palco, S., & Rigaud, M. (2005). Reaction characteristics of magnesia-spinel refractories with cement clinker. International Journal of Applied Ceramic Technology, 2(4), 327-335. Lien externe
He, H., Palco, S., & Rigaud, M. Multiple functions of antioxidants in carbon-containing castables [Communication écrite]. 9th Biennal Worlwide Congress on Refractories, Orlando. Non disponible
He, H., Palco, S., Paschek, G., Paransky, E., & Rigaud, M. (août 2004). Role of graphite pellets on thermo-mechanical properties of basic castables [Communication écrite]. Advances in refractories for the metallurgical industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible
He, H., Palco, S., & Rigaud, M. (2003). Extruded graphite pellets in magnesia-based castables. Canadian Metallurgical Quarterly, 42(2), 149-156. Lien externe
He, H., Palco, S., Paransky, E., & Rigaud, M. (janvier 2003). Graphite pellets: a new source of carbon designed for castables [Communication écrite]. 8th biennial worlwide congress on refractories, UNITECR 2003, Osaka, Japan. Non disponible
He, H., Palco, S., & Rigaud, M. (mars 2003). Magnesia-graphite cement-free castables [Communication écrite]. 4th international symposium on refractories, Dalian, China. Publié dans China's refractories, 3. Non disponible
He, H., & Rigaud, M. (mars 2002). Carbon containing castables [Communication écrite]. 38th symposium on refractories, Chesterfield, Missouri. Non disponible
He, H., Palco, S., Kovac, V., & Rigaud, M. (août 2002). Recent improvement on basic graphite-containing castables for steelmaking ladles [Communication écrite]. International Symposium on Ladle and Tundish Metallurgy, Montréal, Québec. Non disponible
He, H., Kovac, V., Rigaud, M., & Chabry, P. (août 1999). Oxidation behavior of graphitic materials usable in monolithic refractories [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible
Hovington, P., L'Espérance, G., Baril, E., & Rigaud, M. (1995). Monitoring the performance of energy-dispersive spectrometer detectors at low-energy. Journal of scanning microscopy, 17(3), 136-138. Lien externe
Ildefonse, J.-P., Bouchetou, M. L., Gabis, V., Rigaud, M., Rebouillat, L., Daniellou, P., & Dubreuil, P. (janvier 1998). Microstructure and related properties of mullite occuring on heating of andalusite-made refractories [Communication écrite]. 9th international symposium on industrial ceramics, Bologna, Italie. Non disponible
Ildefonse, J.-P., Gabis, V., Rigaud, M., Rebouillat, L., Daniellou, P., & Dubreuil, P. (novembre 1997). Mullitisation of andalusite in bricks and castables [Communication écrite]. Refractories : a worldwide technology. UNITECR '97. Unified International technical conference on refractories. Fifth Biennial Worldwide Congress, New-Orleans, LA, USA. Non disponible
Kosc, E., Paransky, E., Palco, S., & Rigaud, M. (janvier 2003). Olivine-based refractories for the copper industry [Communication écrite]. Proceed. European metallurgical conference, Hannover, Germany. Non disponible
Kandel, M., Khou, N. S., Rigaud, M., & Chabry, P. (2000). Utilizzo di micropellets di grafite in gellate refrattarie a base di Al₂O₃-SiC-C. Ceramica acta, 12(5-6), 2-12. Non disponible
Kandel, M., Zhou, N. S., Rigaud, M., & Chabry, P. (janvier 1998). Use of micropellets of graphite in Al2O3-SiC-C castables [Communication écrite]. 9th international symposium on industrial ceramics, Bologna, Italie. Non disponible
Li, X., & Rigaud, M. (août 1996). Effect of graphite quality on oxidation and corrosion resistance of magnesia-carbon refractories [Communication écrite]. Advances in refractories for the metallurgical industries II : 35th Annual conference of Metallurgists of CIM, Montréal, Québec. Non disponible
Li, X.-M., & Rigaud, M. (1996). Methods to characterize oxidation resistance for magnesia-carbon refractories. China's Refractories, 5(3), 13-22. Lien externe
Li, X., & Rigaud, M. (janvier 1996). Oxidation and corrosion resistance of MgO-C refractories with anti-oxidants [Communication écrite]. 96 international symp. on refractories, Haikou, China. Non disponible
Li, X., Palco, S., & Rigaud, M. (1995). Oxidation kinetics of graphite phase in magnesia-carbon refractories. Journal American Ceramic Society, 78(4), 965-071. Lien externe
Nguyen-Duy, P., & Rigaud, M. (1974). Thermodynamic properties of zinc in dilute solution with silver in molten tin in the range 723 to 923 K. The Journal of Chemical Thermodynamics, 6(8), 727-733. Lien externe
Nguyen-Duy, P., & Rigaud, M. (1974). Activity of zinc in the tin-rich corner of the ternary alloy of zinc, copper, and tin in the temperature range 723 to 923 K. The Journal of Chemical Thermodynamics, 6(10), 999-1004. Lien externe
Parr, C., Harmuth, H., Pandolfelli, V., Poirier, J., Rigaud, M., & Sinnema, S. (septembre 2015). Firing research for refractories in steel ladle application [Communication écrite]. 14th biennial worldwide Congress on Unified International Technical Conference on Refractories (UNITECR 2015), Vienna, Austria. Non disponible
Poirier, J., Gasser, A., Huger, M., & Rigaud, M. (2010). FIRE : un réseau d'excellence dans le domaine des réfractaires. Verre, 16(2), 24-26. Non disponible
Pandolfelli, V. C., & Rigaud, M. (2008). What does seduction have to do with refractory engineering education in the 21st century? Journal of the Technical Association of Refractories of Japan, 28(1), 2-7. Non disponible
Pirker, S., McFarlane, C., & Rigaud, M. (2006). FIRE - the Federation for International Refractory Research and Education. RHI Bulletin: The Journal of Refractory Innovations, 28(1), 43-45. Non disponible
Palco, S., & Rigaud, M. (mai 2005). Addition of carbon to castables for steel-ladle applications [Communication écrite]. XV Conference on refractory castables czech silicat society, Prague, Czech Republic. Non disponible
Prigent, P., Hubert, P., & Rigaud, M. Behavior of andalusite in the matrix of high alumina low cement castables [Communication écrite]. 9th Biennal Worlwide Congress on Refractories, Orlando. Non disponible
Palco, S., He, H., Paransky, E., & Rigaud, M. (juin 2004). The challenges of adding natural graphite into castables [Communication écrite]. 17th IEEE International Conference on Application-Specific Systems, Architectures and Processors (ASAP 2004). Publié dans Interceram, (NS). Non disponible
Palco, S., Frechette, M.-H., Rigaud, M., & Divry, E. (juin 2004). New insulation concept for steelmaking ladle-tundish systems [Communication écrite]. International Conference on Refractories, Furnaces, and thermal Insulation, High Tatras, Slovakia. Publié dans Interceram, 53(SUPPL). Non disponible
Paransky, E., He, H., Palco, S., & Rigaud, M. (janvier 2004). Thermo-mechanical properties of refractory castables [Communication écrite]. ICAME 2004, Sousse, Tunisie. Non disponible
Paransky, E., Divry, E., & Rigaud, M. (janvier 2002). Application of cathodoluminescence technique in light microscopy to crystallization study of mold fluxes [Communication écrite]. Microscopy and microanalysis 2002, Québec. Lien externe
Palco, S., & Rigaud, M. (janvier 2002). Corrosion of basic refractories by fayalite slags [Communication écrite]. Metallurgy refractories and environment, Stara Lesna, Slovakia. Non disponible
Paransky, E., Palco, S., & Rigaud, M. (mars 2001). Fracture testing of carbon-containing refractories [Communication écrite]. 84th Steelmaking Conference, Baltimore, MD, USA. Non disponible
Palco, S., Zhou, N., & Rigaud, M. (novembre 2000). Al ₂ O₃ -MgO-C castables for steelmaking ladles recent developments and improvements [Communication écrite]. 58th Electric Furnace Conference and 17th Process Technology Conference, Orlando, FL, USA. Non disponible
Palco, S., & Rigaud, M. (mai 1995). Refractory ceramic fiber composites and high emissivity materials for energy savings in the industry: A state-of-the-art review [Communication écrite]. ENERCOMP 95: international conference on composite materials and energy, Montréal, Québec. Non disponible
Panigrahy, S. C., Rigaud, M., & Hegedus, G. S. (1994). Evaluation of Carol Lake concentrate as mix component at Bethlehem steel's. Ironmaking and Steelmaking, 21(5), 353-361. Non disponible
Palco, S., Li, X., & Rigaud, M. (1994). Synergetic effects on boron-based antioxidant combined with aluminum additive in magnesia-carbon refractories. Canadian Ceramics Quarterly, 63(4), 261-265. Non disponible
Panigrahy, S. C., Rigaud, M., Chong, S. P., & Chanda, B. (mars 1994). The use of Carol Lake concentrate for coke breeze reduction and LTD improvement in sinter productions [Communication écrite]. ISS-AIME, 53rd Ironmaking Conference, Chicago, Illinois, USA. Non disponible
Panigrahy, S. C., & Rigaud, M. (1988). Effect of particle size distribution of specularite concentrates on sinter quality and its influence on the formation of calcium ferrites during sintering. Steel Research, 59(4), 153-160. Lien externe
Pelton, A., Bale, C. W., & Rigaud, M. (1977). The Computer Calculation of a Quaternary Phase Diagram with Liquid-Liquid Immiscibility — The Zn-Cd-Bi-Sn System. [Computer-Berechnung eines quaternären Phasendiagramms mit Unmischbarkeit im flüssigen Zustand. Das System Zink-Kadmium-Wismut-Zinn]. International Journal of Materials Research, 68(2), 135-140. Lien externe
Rigaud, M., Poirier, J., Huger, M., Tonnesen, T., & Pandolfelli, V. (2023). A refractory engineering program for the 21st century. Open Ceramics, 15, 100387 (8 pages). Disponible
Rigaud, M., & Poirier, J. (mars 2022). Refractories from fire to fire [Communication écrite]. 17th Unified International Technical Conference on Refractories (UNITECR 2022), Chicago, IL, USA. Publié dans International Journal of Ceramic Engineering & Science, 4(2). Disponible
Rigaud, M., & Poirier, J. (2019). The FIRE Compendium Series on Refractory Corrosion to match the Education Needs. Ceramics in Modern Technologies, 1(3), 205-206. Lien externe
Rigaud, M. (septembre 2013). Graduate programs in refractory engineering : what is duly needed? [Communication écrite]. 13th Biennal Worldwide Congress on Refractories, Victoria, British Columbia, Canada. Lien externe
Rigaud, M. (octobre 2014). On refractory castable engineering : the book! [Communication écrite]. ALAFAR, Santiago, Chili. Non disponible
Rigaud, M. (2013). Fire: a Hot Idea for International Refractory Education and Research. American Ceramic Society Bulletin, 92(7), 36-37. Lien externe
Rigaud, M. (octobre 2013). On refractory education : moving ahead with FIRE [Communication écrite]. Ralph Lloyd Harris Memorial Symposium 51st Conference of the Metallurgical Society of Canada (CIM), Met Soc 2013, Montréal, Québec. Non disponible
Rigaud, M., Harmuth, H., & Zhou, N. (octobre 2012). For an educational and industrial partnership in a coopetitive world: FIRE [Communication écrite]. 6th International Symposium on Refractories, Zhengzhou, Chine. Non disponible
Rigaud, M. (2011). Metallurgical/materials engineering education in Canada at École Polytechnique. Dans The Canadian metallurgical and materials landscape 1960 to 2011 (37-39). Non disponible
Rigaud, M. (janvier 2010). The Federation for International Refractory Research and Education (FIRE): Progress and Outcome on Education, Research and Industrial Partnership [Communication écrite]. 12th International Ceramics Congress - Advances in Sciences and Technology, Switzerland. Lien externe
Rigaud, M. (mars 2010). FIRE : An example of coopetition to contribute to the prosperity of the refractory industry [Communication écrite]. 46th ACeRS meeting, St-Louis Section RCD. Non disponible
Rigaud, M., Harmuth, H., & Buchberger, B. (2010). FIRE : Its relevance to the prosperity of the refractory industry. RHI bulletin, 1, 35-37. Non disponible
Rigaud, M. (2010). FIRE at CIMTEC. Refractories World Forum, 2(3), 68-68. Non disponible
Rigaud, M. (octobre 2010). An International Education for Refractories Engineers : The FIRE's Experience [Communication écrite]. 5th International Symposium on Advanced in Refractories V, The Michel Rigaud Symposium, Vancouver, BC. Non disponible
Rigaud, M. (octobre 2009). FIRE : New challenges ahead [Communication écrite]. Unified International Technical Conference Refractories, Salvador, Brazil. Non disponible
Rigaud, M. (septembre 2008). L'éducation et la recherche en réfractaires : la raison d'être de la FIRE [Communication écrite]. Journées spécialisées réfractaires du Groupe français de la céramique. Non disponible
Rigaud, M. (février 2008). New horizons in refractories development and applications [Communication écrite]. 7th India International Refractories Congress (IREFCON08), Kolkata, India. Non disponible
Rigaud, M. (septembre 2007). FIRE still growing [Communication écrite]. UNITECR 2007, Dresden, Germany. Non disponible
Rigaud, M., Gault, C., Poirier, J., & Pirker, S. (2006). La fédération internationale pour l'éducation et la recherche en réfractaires. Industrie Céramique et Verrière (1006), 63-66. Non disponible
Rigaud, M., Gault, C., Poirier, J., & Pirker, S. (2006). International Federation for Refractory Education and Research: Fire. Silicates Industriels, 71(5-6), 79-80. Non disponible
Rigaud, M., Balamurugan, K., & Sankaranarayanane, K. (2006). Rheological and thermomechanical behaviour of steel fibre reinforced carbon containing castables. Advances in Science and Technology, 45, 2278-2283. Lien externe
Rigaud, M. (2005). Dream in refractories - what a nice paradox. Taikabutsu Overseas, 25(1). Non disponible
Rigaud, M. Education and research : thin relevance to the future prosperity of the refractories industry [Communication écrite]. 9th Biennal Worlwide Congress on Refractories, Orlando. Non disponible
Rigaud, M., Zhou, N. S., & Ye, F. B. (2005). The Future of the refractory industry, with a chinese perspective. China's Refractories, 14(4), 3-7. Lien externe
Rigaud, M. (2005). Trends in the steel industry and developments of new refractory materials. Refractories Applications and News, 10(5), 26-31. Non disponible
Rigaud, M. (mars 2004). CIREP and the refractory industry [Communication écrite]. ICAME, Sousse, Tunisie. Non disponible
Rigaud, M. (avril 2004). Major trends in the refractories industry [Communication écrite]. Plantje's award, acceptance lecture, 40th St-Louis Symposium, ACeRS, St-Louis Missouri, USA. Non disponible
Rigaud, M., Palco, S., & Paransky, E. (mai 2004). New refractory materials for the copper industry [Communication écrite]. Tehran International conference on refractories. Non disponible
Rigaud, M. (mars 2004). Thermomechanical properties of refractory castable [Communication écrite]. ICAME, Sousse, Tunisie. Non disponible
Rigaud, M. (mai 2004). Trends in the steel industry and development of new refractory materials [Communication écrite]. Tehran International conference on refractories. Non disponible
Rigaud, M., & Palco, S. (juillet 2002). Carbon-containing castables for steelmaking applications [Communication écrite]. International Symposium B2 - Refractories : trends in research and applications, part of CIMTEC 2002, Florence, Italy. Publié dans Industrial Ceramics, 23(2). Lien externe
Rigaud, M., Palco, S., Paransky, E., & Cherig, K. (janvier 2003). Elaboration and characterization of basic refractories for the copper industry [Communication écrite]. Cobre Copper 2003, Santiago, Chili. Non disponible
Rigaud, M., & Palco, S. (2003). Gettate refrattarie contenenti carbonio per applicazioni in acciaierie. Ceramurgia, 1-2, 26-37. Non disponible
Rigaud, M. (janvier 2003). Refractory education in North America [Communication écrite]. UNITECR 2003, Osaka, Japan. Non disponible
Rigaud, M., Palco, S., & Zhou, N. (novembre 2001). Alumina and magnesia-based castables containing graphite: Comparison [Communication écrite]. 59th Electric Furnace Conference and 19th Process Technology Conference, Phoenix, AZ. Publié dans Iron & steelmaker, 29(10). Non disponible
Rebouillat, L., & Rigaud, M. (2002). Andalusite-based high-alumina castables. Journal American Ceramic Society, 85(2), 373-378. Lien externe
Rigaud, M., & Allaire, C. (2002). Ceramics and industrial refractories of École Polytechnique. Refractory applications and news, 7(2). Non disponible
Rodrigues, J. A., Pandolfelli, V. C., & Rigaud, M. (2002). Elevated temperature thermal shock parameters for refractories. Interceram, 51(5), 322-326. Non disponible
Rigaud, M. (janvier 2002). Forecasting the future of the refractories industry: facing the next ten years [Communication écrite]. 1st world Refractory Congress 2002, Singapore. Non disponible
Rigaud, M., & Zhou, N. S. (2002). Major trends in refractory industry at the beginning of the 21st century. China's Refractories, 11(2), 3-8. Lien externe
Rigaud, M., Palco, S., & Zhou, N. S. (janvier 2001). Alumina and magnesia-based castables containing graphite: a comparaison [Communication écrite]. UNITECR 2001, Cancun, Mexico. Non disponible
Rigaud, M. (2001). Corrosion of industrial refractories. Dans Fundamentals of refractory technology (Vol. 125, 135-154). Lien externe
Rigaud, M., Guo, Z., & Palco, S. (janvier 2000). Coating formation on basic bricks in rotary cement kilns [Communication écrite]. 29th alafar congress, Pucon, Chili. Non disponible
Rigaud, M. (2000). Corrosion of refractories and ceramics. Dans Uhlig's corrosion handbook (2e éd., 395-410). Lien externe
Rigaud, M. (2000). Corrosion testing of refractories and ceramics. Dans Uhlig's corrosion handbook (2e éd., 1165-1169). Lien externe
Rigaud, M., Guo, Z., He, H., & Kovac, V. (janvier 1999). Coatability, adherence and refractories evaluation [Communication écrite]. UNITECR'99, Berlin, Allemagne. Non disponible
Rebouillat, L., Rigaud, M., Daniellou, P., & Dubreuil, P. (août 1999). Hydraulically-bonded andalusite-based castables [Communication écrite]. 3rd International Symposium on Advances in Refractories for the Metallurgical Industries, Québec City, Québec, Canada. Non disponible
Rigaud, M. (janvier 1999). Magnesia-carbon castables: a review [Communication écrite]. 82nd steelmaking conference, Chicago, USA. Non disponible
Rebouillat, L., Rigaud, M., Dubreuil, P., & Daniellou, P. New generation of high alumina castables with micronized andalusite [Communication écrite]. 6th European Ceramic Society Conference, Brighton, UK. Non disponible
Rigaud, M., Xing, C., Blanchar, M., & Kovac, V. (janvier 1998). Basic castables for steelmaking applications [Communication écrite]. EAF conference, New Orleans, USA. Non disponible
Rebouillat, L., Rigaud, M., Ildefonse, J.-P., Gabis, V., Dubreuil, P., & Daniellou, P. (janvier 1998). Cement-free castables with micronized andalusite [Communication écrite]. 9th international symposium on industrial ceramics, Bologna, Italie. Non disponible
Rigaud, M. (janvier 1998). Open forum discussion-leading notes [Communication écrite]. 26th McMaster Symposium on steelmaking refractories: what the mini and integrated mills can learn from each other, Hamilton, Ontario. Non disponible
Rigaud, M., Kovác, V., Xing, C., Palco, S., & Rybar, A. Spinel and forsterite bonded magnesia castables for steelmaking applications [Communication écrite]. ISS, 81st Steelmaking Conference, Toronto. Lien externe
Rigaud, M., & Xing, C. (1997). Basic castables for ladle's steelmaking application: a review. Canadian Ceramic Society Journal, 66(3), 206-209. Non disponible
Ratle, A., Pandolfelli, V. C., Allaire, C., & Rigaud, M. (1997). Correlation between thermal shock and mechanical impact resistance of refractories. British Ceramic Transactions, 96(4), 225-236. Non disponible
Rigaud, M. (1997). Nuovi additivi in refrattari a legame di carbonio. [New additives in carbon-bonded refractories]. Ceramurgia, 27(2), 81-87. Non disponible
Rigaud, M. (novembre 1997). Refractory education in Canada [Communication écrite]. UNITECR '97, New-Orleans, La, USA. Non disponible
Rigaud, M., Xing, C., & Kovac, V. (1997). Volume stability of spinel-bonded magnesia castables EuroCeramics. Key Engineering Materials, 132-136(3), 1818-1821. Lien externe
Rigaud, M., Li, X., & Lagacé, M. (août 1996). Characterisation of flake graphite for carbon-bonded refractories [Communication écrite]. Advances in refractories for the metallurgical industries II : 35th Annual conference of Metallurgists of CIM, Montréal, Québec. Non disponible
Rigaud, M., Wang, N., & Xing, C. (janvier 1996). Magnesia-based castables: some recent developments [Communication écrite]. 2nd International Meeting of Pacific Rim Ceramic societies, Cairns, Australia. Non disponible
Rigaud, M., Lagacé, M., & Blanchar, M. (janvier 1996). Natural graphites for carbon-bonded refractories [Communication écrite]. 3nd Internationationale Meeting of Pacific Rim Ceramic Societies, Cairns, Australia. Non disponible
Rigaud, M., & Zhong, W. (janvier 1996). Role of o'sialon on oxidation resistance of MgO-C refractories [Communication écrite]. 96 international symp. on refractories, Haikou, China. Non disponible
Ratle, A., Lagacé, M., Pandolfelli, V., Allaire, C., & Rigaud, M. (1996). A simple method for evaluating elastic modulus of refractories at high temperatures. Canadian Ceramic Quarterly, 65(3), 202-205. Non disponible
Rigaud, M., Palco, S., & Wang, N. (janvier 1995). Spinel formation in the MgO-Al2O3 system relevant to basic castables [Communication écrite]. UNITECR'95, Kyoto, Japan. Non disponible
Rigaud, M., Panigrahy, S., & Legast, P. (1994). Self-fluxing synthetic forsterite based binders for pelletizing iron ores. Sidor Hoy Internacional, 16(50), 35-43. Non disponible
Sankaranarayanane, K., Balamurugan, K., & Rigaud, M. (2009). Mechanical properties up to 1100 C of Al2O3-MgO-extruded graphite pellets castables reinforced with steel fibres. Ceramics International, 35(1), 359-362. Lien externe
Smith, J., Pirker, S., McFarlane, C., Bittencourt, L., Pandolfelli, V., & Rigaud, M. (2006). FIRE-th Federation for International Refractory Research and Education. Refractories Applications and News, 11(3), 8-11. Non disponible
Sankaranarayanane, K., Zhou, X., & Rigaud, M. (août 2004). Influence of castable design on the bingham to dilatancy transition [Communication écrite]. Advances in refractories for the metallurgical industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible
Sankaranarayanane, K., Tremblay, L., & Rigaud, M. (avril 2003). Role of fine aluminas on rheological behaviour of brown fused alumina-based, self-flow castables [Communication écrite]. 39th Symposium on Refractories, St-Louis, Missouri. Non disponible
Vermeulen, Y., Divry, E., & Rigaud, M. (2004). The influence of chemical composition on the crystallization and the heat transfer of synthetic mould fluxes. Canadian Metallurgical Quarterly, 43(4), 527-534. Lien externe
Xing, C., Kovac, V., & Rigaud, M. (1997). Volume stability of various MgO-Al ₂O₃ castable mixes. Journal of the Canadian Ceramic Society, 66(3), 217-222. Non disponible
Ye, F., Rigaud, M., & Zhong, X. (2005). Effects of boron bearing additives on hot modulus of rupture of doloma-carbon and magdoloma-carbon refractories:. Journal of the Technical Association of Refractories, Japan, 25(3), 186-188. Non disponible
Ye, F. B., Rigaud, M., Liu, X., & Zhong, X. C. (2005). Rheology of alumina-based graphite-containing castables. China's Refractories, 14(1), 3-8. Lien externe
Ye, F., Rigaud, M., Liu, X., & Zhong, X. (2004). High temperature mechanical properties of bauxite-based SiC-containing castables. Ceramics International, 30(5), 801-805. Lien externe
Ye, F., Rigaud, M., Jia, Q., & Zhong, X. (2004). Rheological behaviour of ultra-low cement alumina based castables. Interceram, 53(1), 8-12. Non disponible
Ye, F., Rigaud, M., Jia, Q., & Zhong, X. (août 2004). Rheology of alumina-based graphite-containing castables [Communication écrite]. Advances in refractories for the metallurgical industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible
Ye, F., Rigaud, M., & Zhong, X. C. (1999). Effects of boron bearing additives on oxidation and corrosion resistance of doloma-based carbon-bonded refractories. Naihuo Cailiao, 33(2), 61-66. Non disponible
Ye, F., Rigaud, M., & Zhong, X. C. (1998). Effects of boron bearing additives on oxidation and corrosion resistance of doloma-based carbon bonded refractories. China's Refractories, 7(2), 3-9. Lien externe
Ye, F., Rigaud, M., & Zhong, X. C. (janvier 1998). Oxidation and corrosion resistance of magdoloma-carbon refractories with boron bearing additives [Communication écrite]. 3rd International Symposium on Refractories, Beijing, China. Non disponible
Ye, F., Rigaud, M., & Zhong, X. (novembre 1997). Effects of boron bearing additives on oxidation and corrosion resistance of doloma-based carbon bonded refractories [Communication écrite]. UNITECR'97, New-Orleans, La, USA. Non disponible
Zhou, X., Sankaranarayanane, K., & Rigaud, M. (2008). Pumpable and shotcreting castable : a design through rheology. Refractories Engineer, 15-18. Non disponible
Zhou, X., Sankaranarayanane, K., & Rigaud, M. (2006). Influence of aging Time on Rheological Behavior of Bauxite-Based Low-Cement Pumpable Castables. Refractories Applications Transactions, 2(1), 2-8. Non disponible
Zhou, X. X., Sankaranarayanane, K., Rigaud, M., Zhou, N. S., & Zhang, S. Q. (2005). Influence of fine fillers on the rheological behaviour of bauxite-based low cement pumpable castables. Canadian Metallurgical Quarterly, 44(1), 23-32. Lien externe
Zhou, X. X., Sankaranarayanane, K., Rigaud, M., & Zhou, N. S. (2005). Influence on aging time on the rheological behavior of bauxite-based low cement-pumpable castable. Refractories application and news, 10(4). Non disponible
Zhou, X., Sankaranarayanane, K., & Rigaud, M. (2004). Design of bauxite-based low-cement pumpable castables: a rheological approach. Ceramics International, 30(1), 47-55. Lien externe
Zhou, X., Sankaranarayanane, K., Rigaud, M., Zhou, N., & Zhang, S. (août 2004). Effect of dispersants on rheological behavior of bauxite-based low-cement castables [Communication écrite]. Advances in refractories for the metallurgical industries IV : fourth international symposium on advances in refractories for the metallurgical industries, Hamilton, Ontario, Canada. Non disponible
Zhou, X., Sankaranarayanane, K., Rigaud, M., Zhou, N., & Zhang, S. (2004). Effect of microsilica on rheological behaviour of bauxite-based low-cement pumpable castable. Interceram, 53(3), 166-173. Non disponible
Zhou, X., Sankaranarayanane, K., Rigaud, M., Zhou, N., & Zhang, S. (2004). Effect of water addition on rheological behaviour of bauxite-based low-cement castables. China's Refractories, 13(3), 25-34. Lien externe
Zhou, X., Sankaranarayanane, K., Rigaud, M., Zhou, N., & Zhang, S. (2004). Influence of calcium aluminate cement on rheological behaviour of bauxite-based low-cement pumpable castable. Refractories application and news, 9(1), 18-24. Non disponible
Zhou, X., & Rigaud, M. (janvier 2003). Correlation between rheological and mechanical properties for bauxite-based low-cement self-flow castables [Communication écrite]. 39th annual symposium on refractories: St.Louis section, St-Louis, USA. Non disponible
Zhou, X., Rigaud, M., Zhou, N., & Zhang, S. (mars 2003). Design of bauxite-based low-cement self-flowing pumpable castable: a rheological approach [Communication écrite]. 4th international symposium on refractories, Dalian, China. Publié dans China's refractories, 3. Non disponible
Zhou, X., Rigaud, M., Zhou, N., & Zhang, S. (janvier 2003). Multi-purpose bauxite-based low-cement castables [Communication écrite]. UNITECR 2003, Osaka, Japan. Non disponible
Zhou, N. S., Palco, S., He, H., Kovac, V., & Rigaud, M. (août 2000). Oxidation and corrosion of carbon-containing castables [Communication écrite]. Fundamentals of Metallurgical Processing: The James M. Toguri Symposium as held at the 39th Annual Conference of Metallurgists of CIM, Ottawa, Ontario, Canada. Non disponible
Zhou, N., & Rigaud, M. (novembre 1999). Al2O3-MgO-C castables for steelmaking ladles [Communication écrite]. 57th Electric Furnace Conference, Pittsburgh, PA, USA. Lien externe
Zhou, N. S., & Rigaud, M. (janvier 1998). Different approaches to incorporating natural flake graphite into Al2O3-SiC-C castables [Communication écrite]. 3rd International Symposium on Refractories, Beijing, China. Non disponible
Zhou, N., & Rigaud, M. (1998). Different approaches to incorporating natural flake graphite into Al2O3-SiC-C castables. China's Refractories, 7(4), 3-10. Lien externe
Zhong, W., & Rigaud, M. (1996). Role of additives on pressureless sintering of O'Sialon. Canadian Ceramics Quarterly, 65(3), 205-210. Non disponible
