<  Back to the Polytechnique Montréal portal

Items where Author is "Martin, Étienne"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: B | C | E | F | G | I | J | K | M | P | Q | S | T
Number of items: 46.

B

Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). Correction to: An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts (vol 53, pg 915, 2022). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 53(5), 1919-1919. External link

Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts. Metallurgical and Materials Transactions A, 53(3), 915-926. External link

Brahme, A., Inal, K., Mishra, R. K., Farzadfar, A., & Martin, É. (2021, June). The Influence of Recrystallization on the Temperature Dependence of Twinning in Magnesium Alloys [Paper]. 12th International Conference on Magnesium Alloys and their Applications (MAGNESIUM 2021). External link

C

Chakraborty, A., Tangestani, R., Esmati, K., Sabiston, T., Yuan, L., & Martin, É. (2023). Mitigating inherent micro-cracking in laser additively manufactured RENE 108 thin-wall components. Thin-Walled Structures, 184, 110514 (11 pages). External link

Chakraborty, A., Muhammad, W., Masse, J.-P., Tangestani, R., Ghasri-Khouzani, M., Wessman, A., & Martin, É. (2023). Role of alloy composition on micro-cracking mechanisms in additively manufactured Ni-based superalloys. ACTA Materialia, 255, 16 pages. External link

Chakraborty, A., Tangestani, R., Sabiston, T., Krutz, N., Yuan, L., & Martin, É. (2022, February). Effect of Build Height on Micro-cracking of Additively Manufactured Superalloy RENÉ 108 Thin-Wall Components [Paper]. 151st TMS Meeting & Exhibition - Supplemental Proccedings (TMS 2022), Anaheim, California, USA. External link

Chakraborty, A., Tangestani, R., Muhammad, W., Sabiston, T., Masse, J.-P., Batmaz, R., Wessman, A., & Martin, É. (2022). Micro-cracking mechanism of RENE 108 thin-wall components built by laser powder bed fusion additive manufacturing. Materials Today Communications, 30, 103139 (14 pages). External link

E

Eftekhari, N., Muhammad, W., Haftlang, F., Zarei-Hanzaki, A., & Martin, É. (2020). Microstructural evolution and corrosion behavior of Sanicro 28 during thermomechanical processing. Materials Today Communications, 24, 10 pages. External link

F

Farzadfar, S. A., Martin, É., Sanjari, M., Essadiqi, E., Wells, M. A., & Yue, S. (2012). On the deformation, recrystallization and texture of hot-rolled Mg-2.9Y and Mg-2.9Zn solid solution alloys - A comparative study. Materials Science and Engineering: A, 534, 209-219. External link

Farzadfar, S. A., Martin, É., Sanjari, M., Essadiqi, E., & Yue, S. (2012). Texture weakening and static recrystallization in rolled Mg-2.9Y and Mg-2.9Zn solid solution alloys. Journal of Materials Science, 47(14), 5488-5500. External link

G

Ghasri-Khouzani, M., Karimialavijeh, H., Pröbstle, M., Batmaz, R., Muhammad, W., Chakraborty, A., Sabiston, T. D., Harvey, J.-P., & Martin, É. (2023). Processability and characterization of A20X aluminum alloy fabricated by laser powder bed fusion. Materials Today Communications, 35, 105555 (14 pages). External link

Ghasri-Khouzani, M., Karimialavijeh, H., Tangestani, R., Probstle, M., & Martin, É. (2023). Single-track study of A20X aluminum alloy fabricated by laser powder bed fusion: Modeling and experiments. Optics & Laser Technology, 162, 10 pages. External link

I

Im, S., Batmaz, R., Natarajan, A., & Martin, É. (2023, March). Compatibility Study of Polymeric Binders for Aluminum Binder Jet Parts [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link

Im, S., Ghasri-Khouzani, M., Muhammad, W., Batmaz, R., Esmati, K., Chakraborty, A., Natarajan, A., & Martin, É. (2023). Evaluation of Different Sintering Agents for Binder Jetting of Aluminum Alloy. Journal of Materials Engineering and Performance, 32(21), 9550-9560. External link

J

Jonas, J. J., Mu, S., Al-Samman, T., Gottstein, G., Jiang, L., & Martin, É. (2011). The role of strain accommodation during the variant selection of primary twins in magnesium. ACTA Materialia, 59(5), 2046-2056. External link

Jonas, J. J., Quelennec, X., Jiang, L., & Martin, É. (2009). The Avrami kinetics of dynamic recrystallization. ACTA Materialia, 57(9), 2748-2756. External link

K

Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Harvey, J.-P., & Martin, É. (2023, March). Comparison of Additively Manufactured and Cast Aluminum A205 Alloy [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link

Karimialavijeh, H., Ghasri-Khouzani, M., Das, A., Proebstle, M., & Martin, É. (2023). Effect of laser contour scan parameters on fatigue performance of A20X fabricated by laser powder bed fusion. International Journal of Fatigue, 175, 13 pages. External link

Kohar, C. P., Martin, É., Connolly, D. S., Patil, S., Krutz, N., Wei, D., & Inal, K. (2019). A new and efficient thermo-elasto-viscoplastic numerical implementation for implicit finite element simulations of powder metals: An application to hot isostatic pressing. International Journal of Mechanical Sciences, 155, 222-234. External link

M

Muhammad, W., Batmaz, R., Natarajan, A., & Martin, É. (2022). Effect of binder jetting microstructure variability on low cycle fatigue behavior of 316L. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 839, 142820 (12 pages). External link

Martin, É., Natarajan, A., Kottilingam, S., & Batmaz, R. (2021). Binder jetting of "Hard-to-Weld" high gamma prime nickel-based superalloy RENE 108. Additive Manufacturing, 39, 101894 (9 pages). External link

Martin, É., Muhammad, W., Detor, A. J., Spinelli, I., Wessman, A., & Wei, D. (2020). “Strain-annealed” grain boundary engineering process investigated in Hastelloy-X. Materialia, 9. External link

Morra, M. M., Detor, A. J., Martin, É., & Sharghi-Moshtaghin, R. (2018). Grain refinement in IN706 using Laves phase precipitation. (Patent Application no. US20180057920). External link

Martin, É., Mishra, R. K., & Jonas, J. J. (2011). Deformation structures and recrystallization in magnesium alloys. In Czerwinski, F. (ed.), Magnesium alloys : design, processing and properties (21-42). External link

Martin, É., Mishra, R. K., & Jonas, J. J. (2011). Effect of twinning on recrystallisation textures in deformed magnesium alloy AZ31. Philosophical Magazine, 91(27), 3613-3626. External link

Martin, É., Azzi, M., Salishchev, G. A., & Szpunar, J. (2010). Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti-6Al-4V. Tribology International, 43(5-6), 918-924. External link

Martin, É., & Jonas, J. J. (2010). Evolution of microstructure and microtexture during the hot deformation of Mg-3% Al. ACTA Materialia, 58(12), 4253-4266. External link

Martin, É. (2010). A Microtexture Characterization of Recrystallization and Twinning in Magnesium [Ph.D. Thesis, McGill University]. External link

Martin, É., Capolungo, L., Jiang, L., & Jonas, J. J. (2010). Variant selection during secondary twinning in Mg-3%Al. ACTA Materialia, 58(11), 3970-3983. External link

Martin, É., Jiang, L., Godet, S., & Jonas, J. J. (2009). The combined effect of static recrystallization and twinning on texture in magnesium alloys AM30 and AZ31. External link

Martin, É., Godet, S., Jiang, L., Elwazri, A., Jacques, P. J., & Jonas, J. J. (2008, June). An EBSD study of the misorientations related to dynamic recrystallization in Mg AM30 deformed at high temperatures [Paper]. 15th International Conference on the Texture of Materials, Pittsburgh, PA. External link

Martin, É., Kharrat, S., Coutand, B., & Nardo, M. (1992, September). Testing Procedure for Characterizing the Thermal Fatigue Resistance of Thermo-Structural Composites [Paper]. European Conference on Composites Testing and Standardisation (ECCM-CTS 1992), Amsterdam, Pays-Bas. Unavailable

P

Paques, M., Changeux, B., Das, A., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (2023, March). Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4V [Paper]. 152nd Annual Meeting and Exhibition of The Minerals, Metals and Materials Society (TMS 2023), San Diego, CA, USA. External link

Peykov, D., Martin, É., Chromik, R., Gauvin, R., & Trudeau, M. Deformation of zirconium alloys at the nanoscale [Poster]. Unspecified. External link

Peykov, D., Martin, É., Chromik, R. R., Gauvin, R., & Trudeau, M. (2012). Evaluation of strain rate sensitivity by constant load nanoindentation. Journal of Materials Science, 47(20), 7189-7200. External link

Q

Quelennec, X., Martin, É., Jiang, L., & Jonas, J. J. (2010). Work hardening and kinetics of dynamic recrystallization in hot deformed austenite. Journal of Physics: Conference Series, 240, 012082. External link

S

Sadallah, A., Changeux, B., Miao, H.-Y., Das, A., Turenne, S., & Martin, É. (2023, March). Experimental Investigation of the Effect of High-Temperature Shot Peening on the Surface Integrity of 7010-T7452 Aluminum Alloy [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link

Singh, J., Kim, M.-S., Kaushik, L., Kang, J.-H., Kim, D., Martin, É., & Choi, S.-H. (2020). Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading. International Journal of Plasticity, 127, 102637. External link

Stinville, J.-C., Martin, É., Karadge, M., Ismonov, S., Soare, M., Hanlon, T., Sundaram, S., Echlin, M.L. P., Callahan, P. G., Lenthe, W. C., Miao, J., Wessman, A. E., Finlay, R., Loghin, A., Marte, J., & Pollock, T. M. (2018). Competing Modes for Crack Initiation from Non-metallic Inclusions and Intrinsic Microstructural Features During Fatigue in a Polycrystalline Nickel-Based Superalloy. Metallurgical and Materials Transactions A, 49(9), 3865-3873. External link

Stinville, J. C., Martin, É., Karadge, M., Ismonov, S., Soare, M., Hanlon, T., Sundaram, S., Echlin, M.L. P., Callahan, P. G., Lenthe, W. C., Miller, V. M., Miao, J., Wessman, A. E., Finlay, R., Loghin, A., Marte, J., & Pollock, T. M. (2018). Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: Competing failure modes. ACTA Materialia, 152, 16-33. External link

Sadeghi, A., Martin, É., & Pekguleryuz, M. (2014). Texture Evolution and Twinning During the Expansion of Hot Extruded AZ31 + Sr Seamless Tubes. Metallurgical and Materials Transactions A, 45(13), 6304-6316. External link

T

Tangestani, R., Chakraborty, A., Sabiston, T., Yuan, L., Ghasri-Khouzani, M., & Martin, É. (2023). Multi-Scale Model to Simulate Stress Directionality in Laser Powder Bed Fusion: Application to Thin-Wall Part Failure. Materials & Design, 232, 112147 (17 pages). Available

Tangestani, R., Sabiston, T., Chakraborty, A., Muhammad, W., Lang, Y., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model. Frontiers in Materials, 8, 753040 (14 pages). Available

Tangestani, R., Sabiston, T., Chakraborty, A., Yuan, L., Krutz, N., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 2-Mechanical Model. Frontiers in Materials, 8, 759669 (14 pages). External link

Thatte, A., Martin, É., & Hanlon, T. (2017, June). A novel experimental method for LCF measurement of nickel base super alloys in high pressure high temperature supercritical CO₂ [Paper]. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina. External link

Thatte, A., Loghin, A., Martin, É., Dheeradhada, V., Shin, Y., & Ananthasayanam, B. (2016, March). Multi-scale coupled physics models and experiments for performance and life prediction of supercritical CO₂ turbomachinery components [Paper]. 5th International Symposium on Supercritical CO2 Power Cycles, San Antonio, Texas (24 pages). External link

List generated on: Wed Nov 29 07:59:56 2023 EST