 | Up a level |
Étienne MartinDepartment of Mechanical Engineering
Profile in the Directory of Experts of Polytechnique Montréal
Collaboration networkThis graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Word cloudA word cloud is a visual representation of the most frequently used words in a text or a set of texts. The words appear in different sizes, with the size of each word being proportional to its frequency of occurrence in the text. The more frequently a word is used, the larger it appears in the word cloud. This technique allows for a quick visualization of the most important themes and concepts in a text.
In the context of this page, the word cloud was generated from the publications of the author {}. The words in this cloud come from the titles, abstracts, and keywords of the author's articles and research papers. By analyzing this word cloud, you can get an overview of the most recurring and significant topics and research areas in the author's work.
The word cloud is a useful tool for identifying trends and main themes in a corpus of texts, thus facilitating the understanding and analysis of content in a visual and intuitive way.
Chakraborty, A., Lalh, M., Martin, É., Karimialavijeh, H., Bejarano, A., Wessman, A., Zou, Y., & Habibnejad-Korayem, M. (2025). Influence of carbon on the rheology and additive manufacturability of Ti-6Al-4 V powders. Materials & Design, 113833. External link
Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (2025, March). Development of an Environmentally Friendly and Low-Cost Binder for 17-4PH Metal Part Printing via Fused Deposition Modeling [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Desgagnes, L., Tangestani, R., Miao, H., Natarajan, A., Rudloff, R., Pendurti, S., Bitar-Nehme, E., & Martin, É. (2025, March). A Layer-By-Layer FEM Curing Model for Binder Jetting of 316L [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Moradi, M., Karimialavijeh, H., Bitar-Nehme, E., & Martin, É. (2025, March). Printability and Green Mechanical Properties of Binder Jet Additive Manufactured Co–Cr–Mo Parts [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Abanobi, E. A., Sabiston, T., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025, March). Temperature-Sensitive Isotropic Sintering Model for 316L Binder Jetting Parts [Paper]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Published in The minerals, metals & materials series. External link
Chakraborty, A., Martin, É., & Habibnejad-Korayem, M. (2024). Effect of carbon on the additive manufacturability of plasma-atomized aluminum alloys – A robust powder characterization study. Powder Technology, 452, 120559 (16 pages). External link
Esmati, K., Chakraborty, A., Pendurti, S., Natarajan, A., & Martin, É. (2024). Anisotropic sintering behavior of stainless steel 316L printed by binder jetting additive manufacturing. Materials Today Communications, 41, 110528 (13 pages). External link
Paques, M., Chakraborty, A., Changeux, B., Miao, H., Muhammad, W., Turenne, S., Inal, K., & Martin, É. (2024). Comparative assessment of Ti-6Al-4 V titanium alloy fatigue life improvement by vibratory peening, shot peening, and vibratory finishing. Fatigue & Fracture of Engineering Materials & Structures, 47(12), 14447 (19 pages). External link
Karimialavijeh, H., Chakraborty, A., Azzi, M., Proebstle, M., & Martin, É. (2024). Effect of precipitation hardening on the microstructure, mechanical, and corrosion properties of additively manufactured A20X aluminum alloy. Materials Science and Engineering: A, 913, 147033 (15 pages). External link
Sadallah, A., Miao, H., Changeux, B., Bitar-Nehme, E., Chakraborty, A., Turenne, S., & Martin, É. (2024, March). Effect of Shot Peening and High-Temperature Shot Peening on the High Cycle Fatigue of 7010-T7452 Aluminum Alloy [Paper]. Light Metals 2024 (TMS 2024), Orlando, FL, USA. External link
Karimialavijeh, H., Chakraborty, A., Proebstle, M., & Martin, É. (2024, January). Effect of Shot Peening on Fatigue Properties of A20X Fabricated by Laser Powder Bed Fusion [Paper]. Light Metal 2024 (TMS 2024). External link
Karimialavijeh, H., Chakraborty, A., Proebstle, M., Oishi, K., Harvey, J.-P., & Martin, É. (2024, January). Heat Treatment of A20X Alloy Manufactured Using Laser Powder Bed Fusion [Paper]. Light Metal 2024 (TMS 2024). External link
Esmati, K., Chakraborty, A., Pendurti, S., Natarajan, A., & Martin, É. (2024, March). Influence of Temperature and Print Orientation on Anisotropic Sintering in Binder Jet SS316L [Paper]. 153rd Annual Meeting & Exhibition Supplemental Proceedings (TMS 2024), Orlando, FL, USA. External link
Tangestani, R., Chakraborty, A., Sabiston, T., Yuan, L., Ghasri-Khouzani, M., & Martin, É. (2023). Multi-Scale Model to Simulate Stress Directionality in Laser Powder Bed Fusion: Application to Thin-Wall Part Failure. Materials & Design, 232, 112147 (17 pages). Available
Tangestani, R., Chakraborty, A., Sabiston, T., Yuan, L., & Martin, É. (2023). Buckling mechanism simulation for thin-wall components made by laser powder bed fusion. Key Engineering Materials, 964, 6 pages. External link
Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Harvey, J.-P., & Martin, É. (2023, March). Comparison of Additively Manufactured and Cast Aluminum A205 Alloy [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link
Im, S., Batmaz, R., Natarajan, A., & Martin, É. (2023, March). Compatibility Study of Polymeric Binders for Aluminum Binder Jet Parts [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link
Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Pröbstle, M., & Martin, É. (2023). Direct aging of additively manufactured A20X aluminum alloy. Journal of Alloys and Compounds, 968, 172071 (11 pages). External link
Karimialavijeh, H., Ghasri-Khouzani, M., Das, A., Pröbstle, M., & Martin, É. (2023). Effect of laser contour scan parameters on fatigue performance of A20X fabricated by laser powder bed fusion. International Journal of Fatigue, 175, 13 pages. External link
Paques, M., Changeux, B., Das, A., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (2023, March). Effect of the Vibratory Peening Parameters on Surface Properties of Ti-6Al-4V [Paper]. 152nd Annual Meeting and Exhibition of The Minerals, Metals and Materials Society (TMS 2023), San Diego, CA, USA. External link
Im, S., Ghasri-Khouzani, M., Muhammad, W., Batmaz, R., Esmati, K., Chakraborty, A., Natarajan, A., & Martin, É. (2023). Evaluation of Different Sintering Agents for Binder Jetting of Aluminum Alloy. Journal of Materials Engineering and Performance, 32(21), 9550-9560. External link
Sadallah, A., Changeux, B., Miao, H., Das, A., Turenne, S., & Martin, É. (2023, March). Experimental Investigation of the Effect of High-Temperature Shot Peening on the Surface Integrity of 7010-T7452 Aluminum Alloy [Paper]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. External link
Chakraborty, A., Tangestani, R., Esmati, K., Sabiston, T., Yuan, L., & Martin, É. (2023). Mitigating inherent micro-cracking in laser additively manufactured RENE 108 thin-wall components. Thin-Walled Structures, 184, 110514 (11 pages). External link
Ghasri-Khouzani, M., Karimialavijeh, H., Pröbstle, M., Batmaz, R., Muhammad, W., Chakraborty, A., Sabiston, T. D., Harvey, J.-P., & Martin, É. (2023). Processability and characterization of A20X aluminum alloy fabricated by laser powder bed fusion. Materials Today Communications, 35, 105555 (14 pages). External link
Chakraborty, A., Muhammad, W., Masse, J.-P., Tangestani, R., Ghasri-Khouzani, M., Wessman, A., & Martin, É. (2023). Role of alloy composition on micro-cracking mechanisms in additively manufactured Ni-based superalloys. ACTA Materialia, 255, 16 pages. External link
Ghasri-Khouzani, M., Karimialavijeh, H., Tangestani, R., Pröbstle, M., & Martin, É. (2023). Single-track study of A20X aluminum alloy fabricated by laser powder bed fusion: Modeling and experiments. Optics & Laser Technology, 162, 10 pages. External link
Deldar Masrour, P., Tangestani, R., Farrahi, G., Martin, É., Yuan, L., & Zhang, T. (2023). Track-scale anisotropic thermal material model as a viable substitution in selective laser melting. Journal of Design Against Fatiguq, 1(3), 19-33. External link
Paques, M., Chouchane, K., Changeux, B., De la Torre, L., Badreddine, J., Miao, H., Lévesque, M., Turenne, S., & Martin, É. (2022, September). Control of the vibratory peening machine using the Almen intensity procedure [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy. External link
Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). Correction to: An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts (vol 53, pg 915, 2022). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 53(5), 1919-1919. External link
Muhammad, W., Batmaz, R., Natarajan, A., & Martin, É. (2022). Effect of binder jetting microstructure variability on low cycle fatigue behavior of 316L. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 839, 142820 (12 pages). External link
Chakraborty, A., Tangestani, R., Sabiston, T., Krutz, N., Yuan, L., & Martin, É. (2022, February). Effect of Build Height on Micro-cracking of Additively Manufactured Superalloy RENÉ 108 Thin-Wall Components [Paper]. 151st TMS Meeting & Exhibition - Supplemental Proceedings (TMS 2022), Anaheim, California, USA. External link
Sadallah, A., Badreddine, J., Changeux, B., Turenne, S., Miao, H., Lévesque, M., & Martin, É. (2022, September). The effect of high temperature shot peening on the surface integrity of 2024-T351 aluminum alloy [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy (5 pages). External link
Miao, H., Singhal, M., Lévesque, M., & Martin, É. (2022, September). Experimental investigation of controlled single and repeated impact testing of shot peening on Ti-6Al-4V, 300M and AA7050-T7451 [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy. External link
Das, A., Chouchane, K., Miao, H., Changeux, B., Badreddine, J., Turenne, S., Lévesque, M., & Martin, É. (2022, September). Impact of Vibratory Peening on the Surface Integrity of Cemented Steel E16NCD13 [Paper]. 14th International Conference of Shot Peening (ICSP 2022), Milan, Italy (6 pages). External link
Chakraborty, A., Tangestani, R., Batmaz, R., Muhammad, W., Plamondon, P., Wessman, A., Yuan, L., & Martin, É. (2022). In-process failure analysis of thin-wall structures made by laser powder bed fusion additive manufacturing. Journal of Materials Science and Technology, 98, 233-243. External link
Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts. Metallurgical and Materials Transactions A, 53(3), 915-926. External link
Chakraborty, A., Tangestani, R., Muhammad, W., Sabiston, T., Masse, J.-P., Batmaz, R., Wessman, A., & Martin, É. (2022). Micro-cracking mechanism of RENE 108 thin-wall components built by laser powder bed fusion additive manufacturing. Materials Today Communications, 30, 103139 (14 pages). External link
Tangestani, R., Sabiston, T., Chakraborty, A., Muhammad, W., Lang, Y., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model. Frontiers in Materials, 8, 753040 (14 pages). Available
Martin, É., Natarajan, A., Kottilingam, S., & Batmaz, R. (2021). Binder jetting of "Hard-to-Weld" high gamma prime nickel-based superalloy RENE 108. Additive Manufacturing, 39, 101894 (9 pages). External link
Tangestani, R., Sabiston, T., Chakraborty, A., Yuan, L., Krutz, N., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 2-Mechanical Model. Frontiers in Materials, 8, 759669 (14 pages). External link
Brahme, A., Inal, K., Mishra, R. K., Farzadfar, A., & Martin, É. (2021, June). The Influence of Recrystallization on the Temperature Dependence of Twinning in Magnesium Alloys [Paper]. 12th International Conference on Magnesium Alloys and their Applications (MAGNESIUM 2021). External link
Martin, É., Muhammad, W., Detor, A. J., Spinelli, I., Wessman, A., & Wei, D. (2020). “Strain-annealed” grain boundary engineering process investigated in Hastelloy-X. Materialia, 9. External link
Eftekhari, N., Muhammad, W., Haftlang, F., Zarei-Hanzaki, A., & Martin, É. (2020). Microstructural evolution and corrosion behavior of Sanicro 28 during thermomechanical processing. Materials Today Communications, 24, 10 pages. External link
Singh, J., Kim, M.-S., Kaushik, L., Kang, J.-H., Kim, D., Martin, É., & Choi, S.-H. (2020). Twinning-detwinning behavior of E-form Mg alloy sheets during in-plane reverse loading. International Journal of Plasticity, 127, 102637. External link
Kohar, C. P., Martin, É., Connolly, D. S., Patil, S., Krutz, N., Wei, D., & Inal, K. (2019). A new and efficient thermo-elasto-viscoplastic numerical implementation for implicit finite element simulations of powder metals: An application to hot isostatic pressing. International Journal of Mechanical Sciences, 155, 222-234. External link
Stinville, J.-C., Martin, É., Karadge, M., Ismonov, S., Soare, M., Hanlon, T., Sundaram, S., Echlin, M.L. P., Callahan, P. G., Lenthe, W. C., Miao, J., Wessman, A. E., Finlay, R., Loghin, A., Marte, J., & Pollock, T. M. (2018). Competing Modes for Crack Initiation from Non-metallic Inclusions and Intrinsic Microstructural Features During Fatigue in a Polycrystalline Nickel-Based Superalloy. Metallurgical and Materials Transactions A, 49(9), 3865-3873. External link
Stinville, J. C., Martin, É., Karadge, M., Ismonov, S., Soare, M., Hanlon, T., Sundaram, S., Echlin, M.L. P., Callahan, P. G., Lenthe, W. C., Miller, V. M., Miao, J., Wessman, A. E., Finlay, R., Loghin, A., Marte, J., & Pollock, T. M. (2018). Fatigue deformation in a polycrystalline nickel base superalloy at intermediate and high temperature: Competing failure modes. ACTA Materialia, 152, 16-33. External link
Morra, M. M., Detor, A. J., Martin, É., & Sharghi-Moshtaghin, R. (2018). Grain refinement in IN706 using Laves phase precipitation. (Patent Application no. US20180057920). External link
Thatte, A., Martin, É., & Hanlon, T. (2017, June). A novel experimental method for LCF measurement of nickel base super alloys in high pressure high temperature supercritical CO₂ [Paper]. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, North Carolina. External link
Thatte, A., Loghin, A., Martin, É., Dheeradhada, V., Shin, Y., & Ananthasayanam, B. (2016, March). Multi-scale coupled physics models and experiments for performance and life prediction of supercritical CO₂ turbomachinery components [Paper]. 5th International Symposium on Supercritical CO2 Power Cycles, San Antonio, Texas (24 pages). External link
Peykov, D., Martin, É., Chromik, R., Gauvin, R., & Trudeau, M. Deformation of zirconium alloys at the nanoscale [Poster]. Unspecified. External link
Sadeghi, A., Martin, É., & Pekguleryuz, M. (2014). Texture Evolution and Twinning During the Expansion of Hot Extruded AZ31 + Sr Seamless Tubes. Metallurgical and Materials Transactions A, 45(13), 6304-6316. External link
Peykov, D., Martin, É., Chromik, R. R., Gauvin, R., & Trudeau, M. (2012). Evaluation of strain rate sensitivity by constant load nanoindentation. Journal of Materials Science, 47(20), 7189-7200. External link
Farzadfar, S. A., Martin, É., Sanjari, M., Essadiqi, E., Wells, M. A., & Yue, S. (2012). On the deformation, recrystallization and texture of hot-rolled Mg-2.9Y and Mg-2.9Zn solid solution alloys - A comparative study. Materials Science and Engineering: A, 534, 209-219. External link
Farzadfar, S. A., Martin, É., Sanjari, M., Essadiqi, E., & Yue, S. (2012). Texture weakening and static recrystallization in rolled Mg-2.9Y and Mg-2.9Zn solid solution alloys. Journal of Materials Science, 47(14), 5488-5500. External link
Martin, É., Mishra, R. K., & Jonas, J. J. (2011). Deformation structures and recrystallization in magnesium alloys. In Czerwinski, F. (ed.), Magnesium alloys : design, processing and properties (pp. 21-42). External link
Martin, É., Mishra, R. K., & Jonas, J. J. (2011). Effect of twinning on recrystallisation textures in deformed magnesium alloy AZ31. Philosophical Magazine, 91(27), 3613-3626. External link
Jonas, J. J., Mu, S., Al-Samman, T., Gottstein, G., Jiang, L., & Martin, É. (2011). The role of strain accommodation during the variant selection of primary twins in magnesium. ACTA Materialia, 59(5), 2046-2056. External link
Martin, É., Azzi, M., Salishchev, G. A., & Szpunar, J. (2010). Influence of microstructure and texture on the corrosion and tribocorrosion behavior of Ti-6Al-4V. Tribology International, 43(5-6), 918-924. External link
Martin, É., & Jonas, J. J. (2010). Evolution of microstructure and microtexture during the hot deformation of Mg-3% Al. ACTA Materialia, 58(12), 4253-4266. External link
Martin, É. (2010). A Microtexture Characterization of Recrystallization and Twinning in Magnesium [Ph.D. Thesis, McGill University]. External link
Martin, É., Capolungo, L., Jiang, L., & Jonas, J. J. (2010). Variant selection during secondary twinning in Mg-3%Al. ACTA Materialia, 58(11), 3970-3983. External link
Quelennec, X., Martin, É., Jiang, L., & Jonas, J. J. (2010). Work hardening and kinetics of dynamic recrystallization in hot deformed austenite. Journal of Physics: Conference Series, 240, 012082. External link
Jonas, J. J., Quelennec, X., Jiang, L., & Martin, É. (2009). The Avrami kinetics of dynamic recrystallization. ACTA Materialia, 57(9), 2748-2756. External link
Martin, É., Jiang, L., Godet, S., & Jonas, J. J. (2009). The combined effect of static recrystallization and twinning on texture in magnesium alloys AM30 and AZ31. External link
Martin, É., Godet, S., Jiang, L., Elwazri, A., Jacques, P. J., & Jonas, J. J. (2008, June). An EBSD study of the misorientations related to dynamic recrystallization in Mg AM30 deformed at high temperatures [Paper]. 15th International Conference on the Texture of Materials, Pittsburgh, PA. External link
Martin, É., Kharrat, S., Coutand, B., & Nardo, M. (1992, September). Testing Procedure for Characterizing the Thermal Fatigue Resistance of Thermo-Structural Composites [Paper]. European Conference on Composites Testing and Standardisation (ECCM-CTS 1992), Amsterdam, Pays-Bas. Unavailable
