 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Mousavi, Z., Heuzey, M.-C., Kamal, M. R., Flahaut, E., & Carreau, P. (2021). Rheological, electrical, and dynamic thermomechanical properties: Comparison between multiwall and double-wall carbon nanotubes in polylactide and polyamide 11. Physics of Fluids, 33(11), 13 pages. Lien externe
Nofar, M., Heuzey, M.-C., Carreau, P., & Kamal, M. R. (2020). Nanoparticle Interactions and Molecular Relaxation in PLA/PBAT/Nanoclay Blends. Experimental results, 1(e47), 12 pages. Disponible
Nofar, M., Sacligil, D., Carreau, P., Kamal, M. R., & Heuzey, M.-C. (2019). Poly (lactic acid) blends: processing, properties and applications. International Journal of Biological Macromolecules, 125, 307-360. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Cellulose nanocrystal in poly(lactic acid)/polyamide11 blends: Preparation, morphology and co-continuity. European Polymer Journal, 98(Supplement), 11-20. Lien externe
Safdari, F., Bagheriasl, D., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2018). Rheological, mechanical, and thermal properties of polylactide/cellulose nanofiber biocomposites. Polymer Composites, 39(5), 1752-1762. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. D. (2018). Tuning the localization of finely dispersed cellulose nanocrystal in poly (lactic acid)/bio-polyamide11 blends. Journal of Polymer Science, Part B: Polymer Physics, 56(7), 576-587. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., & Kamal, M. R. (2017). Effects of poly(ethylene glycol) on the morphology and properties of biocomposites based on polylactide and cellulose nanofibers. Cellulose, 24(7), 2877-2893. Lien externe
Safdari, F., Carreau, P., Heuzey, M.-C., Kamal, M. R., & Sain, M. M. (2017). Enhanced properties of poly(ethylene oxide)/cellulose nanofiber biocomposites. Cellulose, 24(2), 755-767. Lien externe
Saffar, A., Jalali Dil, E., Carreau, P., Ajji, A., & Kamal, M. R. (2016). Phase behavior of binary blends of PP/PP‐g‐AA: limitations of the conventional characterization techniques. Polymer International, 65(5), 508-515. Lien externe
Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Development of polypropylene microporous hydrophilic membranes by blending with PP-g-MA and PP-g-AA. Journal of Membrane Science, 462, 50-61. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Effect of water-assisted extrusion and solid-state polymerization on the microstructure of PET/Clay nanocomposites. Polymer Engineering and Science, 54(8), 1723-1736. Lien externe
Saffar, A., Carreau, P., Kamal, M. R., & Ajji, A. (2014). Hydrophilic modification of polypropylene microporous membranes by grafting TiO2 nanoparticles with acrylic acid groups on the surface. Polymer, 55(23), 6069-6075. Lien externe
Saffar, A., Ajji, A., Carreau, P., & Kamal, M. R. (2014). The impact of new crystalline lamellae formation during annealing on the properties of polypropylene based films and membranes. Polymer Engineering and Science, 55(14), 3156-3167. Lien externe
Saffar, A., Carreau, P., Ajji, A., & Kamal, M. R. (2014). Influence of Stretching on the Performance of Polypropylene-Based Microporous Membranes. Industrial & Engineering Chemistry Research, 53(36), 14014-14021. Lien externe
Dini, M., Mousavand, T., Carreau, P., Kamal, M. R., & Ton-That, M.-T. (2014). Microstructure and properties of poly(ethylene terephthalate)/organoclay nanocomposites prepared by water-assisted extrusion: Effect of organoclay concentration. Polymer Engineering and Science, 54(8), 1879-1892. Lien externe
Dini, M., Carreau, P., Kamal, M. R., Ton-That, M.-T., & Esmaeili, B. (2014). Solid-state polymerization of poly(ethylene terephthalate): Effect of organoclay concentration. Polymer Engineering and Science, 54(12), 2925-2937. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2013). Morphology Evolution and Thermomechanical Characteristics of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Rubber Chemistry and Technology, 86(4), 521-537. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2012). The Effects of Nanoclay Dispersion Levels and Processing Parameters on the Dynamic Vulcanization of Tpv Nanocomposites Based on Pp/Epdm Prepared by Reactive Extrusion. Polymer Engineering and Science, 52(5), 1099-1110. Lien externe
Ghasemi, H., Carreau, P., & Kamal, M. R. (2012). Isothermal and Non-Isothermal Crystallization Behavior of Pet Nanocomposites. Polymer Engineering and Science, 52(2), 372-384. Lien externe
Ghasemi, H., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (2012). Properties of Pet/Clay Nanocomposite Films. Polymer Engineering and Science, 52(2), 420-430. Lien externe
Ghasemi, H., Carreau, P., Kamal, M. R., & Uribe-Calderon, J. (2011). Preparation and characterization of PET/clay nanocomposites by melt compounding. Polymer Engineering and Science, 51(6), 1178-1187. Lien externe
Mirzadeh, A., Lafleur, P., Kamal, M. R., & Dubois, C. (2010). The effect of compatibilizer on the co-continuity and nanoclay dispersion level of tpe nanocomposites based on PP/EPDM. Polymer Engineering and Science, 50(11), 2131-2142. Lien externe
Heshmati, V., Kamal, M. R., & Favis, B. D. (avril 2014). Poly (Lactic acid)/Polyamide11/Cellulose Multiphase Systems [Communication écrite]. 72nd Annual Technical Conference of the Society of Plastics Engineers: The Plastics Conference (ANTEC 2014), Las Vegas, NV, United states. Lien externe
Dini, M., Carreau, P., Mousavand, T., Kamal, M. R., & Ton-That, M.-T. (avril 2012). A novel method to prepare pet nanocomposites by water-assisted melt compounding [Communication écrite]. 70th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2012), Orlando, FL, United states. Lien externe
Hesam, G., Carreau, P., Kamal, M. R., & Tabatabaei, S. H. (mai 2010). Study on morphology, crystallinity, barrier and mechanical properties of PET nanocomposite films [Communication écrite]. 68th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2010), Orlando, Florida USA. Lien externe
Ghasemi, H., Carreau, P., & Kamal, M. R. (juin 2009). PET/clay nanocomposites by melt compounding [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
