Up a level |
This graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., & Brochu, M. (2020). High cycle fatigue behavior of hard turned 300 M ultra-high strength steel. International Journal of Fatigue, 131, 12 pages. External link
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R., Songmene, V., & Brochu, M. (2019). Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel. The International Journal of Advanced Manufacturing Technology, 104(1-4), 141-157. External link
Bechtold, J., Danjou, C., & Jomaa, W. (2022, September). Development of a STEP-NC - Enabled Interoperable and Open Architecture CNC Controller [Paper]. IFIP WG 5.7 International Conference on Advances in Production Management Systems (APMS) - Smart Manufacturing and Logistics Systems - Turning Ideas into Action, Gyeongju, South Korea. External link
Bounichane, B., Jomaa, W., Guillemot, G., Fredj, N. B., & Bigerelle, M. (2009, May). Caractérisation multi-échelle de l'usinabilité de l'acier AISI 304L [Paper]. 21es Journées Internationales Francophones de Tribologie de l'Université de Technologie de Compiègne, Compiègne, France. Unavailable
Colombathanthri, A., Jomaa, W., & Chinniah, Y. A. (2023, June). Transition from industry 4.0 to industry 5.0 : a focus on key concepts applied in the manufacturing industry [Paper]. CIGI Qualita MOSIM 2023, Trois-Rivières, Qc, Canada. External link
Daoud, M., Jomaa, W., Chatelain, J. F., & Bouzid, A. (2015). A machining-based methodology to identify material constitutive law for finite element simulation. International Journal of Advanced Manufacturing Technology, 77(9), 2019-2033. External link
Daoud, M., Jomaa, W., Chatelain, J. F., Bouzid, A., & Songmene, V. (2014, June). Identification of Material Constitutive Law Constants Using Machining Tests: A Response Surface Methodology Based Approach [Paper]. 2014 International Conference on High Performance and Optimum Design of Structures and Materials (HPSM/OPTI 2014), Ostende, Belgique. Published in WIT Transactions on The Built Environment, 137. External link
Djebara, A., Jomaa, W., Bahloul, A., & Songmene, V. (2013, May). Dust Emission During Dry Machining of Aeronautic Aluminum Alloys [Paper]. 1st International Conference on Aeronautics Sciences (ICAS 2013), Oran, Algérie. External link
Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. External link
Jomaa, W., Gakwaya, A., & Bocher, P. (2019). Modelling of Materials behavior in finite element simulation of machining processes: Identification techniques and challenges. In Markopoulos, A. P., & Davim, J. P. (eds.), Advanced Machining Processes: Innovative Modeling Techniques . External link
Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (2018, May). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Paper]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Published in MATEC Web of Conferences, 165. Available
Jomaa, W., Songmene, V., Bocher, P., & Gakwaya, A. (2017, September). FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 [Paper]. 9th International Congress on Precision Machining (ICPM 2017), Athènes, Grèce. Published in Solid State Phenomena, 261. External link
Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2017). Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy. Journal of Manufacturing Processes, 26, 446-458. External link
Jomaa, W., Lévesque, J., Bocher, P., Divialle, A., & Gakwaya, A. (2017). Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis. International Journal of Advanced Manufacturing Technology, 91(1), 931-942. External link
Jomaa, W., Songmene, V., & Bocher, P. (2017). Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals. Machining Science and Technology, 21(3), 335-361. External link
Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (2016, July). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Paper]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic. External link
Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2016, September). Finite element analysis of serrated chip formation in machining of 7075-t651 aluminum alloy [Paper]. International Mineral Processing Congress (IMPC 2016), Québec, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2016). An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations. Journal of Materials Engineering and Performance, 25(3), 1010-1027. External link
Jomaa, W., Songmene, V., & Bocher, P. (2016). An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel. Materials and Manufacturing Processes, 31(7), 838-844. External link
Jomaa, W., Songmene, V., & Bocher, P. (2014, November). Experimental and Numerical Investigation on High Speed Machining of aluminums AA6061-T6 and AA7075-T651 [Presentation]. In Journées des Étudiants du Regal (JER 2014), Sherbrooke, Québec. Unavailable
Jomaa, W., Daoud, M., Songmene, V., Bocher, P., & Châtelain, J.-F. (2014, November). Identification and Validation of Marusich's Constitutive Law for Finite Element Modeling of High Speed Machining [Paper]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec (6 pages). External link
Jomaa, W., Songmene, V., & Bocher, P. (2014, November). Material Behavior Modeling for High Speed Machining Simulation of 6061-T6 and 7075-T651 Aluminum Alloys [Poster]. Journées des Étudiants du Regal (JER 2014), Sherbrooke, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2014). Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials, 7(3), 1603-1624. External link
Jomaa, W., Songmene, V., & Bocher, P. (2013, October). Effect of high-speed machining on surface integrity of AA7075-T651 alloy [Paper]. 12th International Aluminum Conference (INALCO 2013), Montréal, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2013, October). Effect of tool/workpiece interaction on the surface integrity of machined AA7075-t651 parts [Poster]. Journées des Étudiants du Regal (JER 2013), Montréal, Québec. Unavailable
Jomaa, W., Songmene, V., & Bocher, P. (2013, October). On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel [Paper]. Materials Science and Technology Conference and Exhibition 2013 (MS&T 2013), Montréal, Québec, Canada. Unavailable
Jomaa, W., Fredj, N. B., Songmene, V., Zaghbani, I., & Braham, C. (2012, May). Hybrid machining versus hard turning-investigation on process induced residual stresses [Paper]. 1st International Conference on Virtual Machining Process Technology (VMPT 2012), Montréal, Québec. Unavailable
Jomaa, W., Zaghbani, I., Songmene, V., Boire, L. P. L., & Lehuy, H. (2011, August). Dry and Wet Machinability of Hardened Mould Steels [Paper]. International Conference on Environmental Pollution and Remediation, Ottawa, Ontario (8 pages). Unavailable
Jomaa, W., Ben Fredj, N., Zaghbani, I., & Songmene, V. (2011). Non-Conventional Turning of Hardened AISI D2 Tool Steel. International Journal of Advances in Machining and Forming Operations, 3(2), 93-126. Unavailable
Jomaa, W., & Fredj, N. B. (2007, March). Effet du tournage dur, usinage à chaud et usinage hybride sur l'usinabilité et l'intégrité des surfaces en acier 155CrMoV12 : étude comparative [Paper]. 2nd International Congress design and modeling of mechanical systems (CMSM 2007), Monastir, Tunisie. Unavailable
Slamani, M., Elhadi, A., Amroune, S., Arslane, M., Jomaa, W., Fouad, H., Châtelain, J.-F., & Jawaid, M. (2024). Investigating the impact of drill material on hole quality in jute/palm fiber reinforced hybrid composite drilling with uncertainty analysis. Heliyon, 10(17), e36925 (23 pages). Available
Souid, A., Jomaa, W., & Terres, M. A. (2024). Artificial neural network-based modelling and prediction of white layer formation during hard turning of steels. Materiaux & Techniques, 112(3), 304 (13 pages). External link
Souid, A., Mbarek, Y., Jomaa, W., & Terres, M. A. (2023, March). Optimization and Prediction of White Layer Thickness After Hard Turning [Paper]. 6th International Tunisian Congress of Mechanics (CoTuMe 2023), Monastir, Tunisia. External link
Shnfir, M., Olufayo, O. A., Jomaa, W., & Songmene, V. (2019). Machinability Study of Hardened 1045 Steel When Milling with Ceramic Cutting Inserts. Materials, 12(23), 3974 (21 pages). External link
Sadeghifar, M., Sedaghati, R., Jomaa, W., & Songmene, V. (2018). A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions. International Journal of Advanced Manufacturing Technology, 96(9), 3747-3791. External link
Sadeghifar, M., Sedaghati, R., Jomaa, W., & Songmene, V. (2018). Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel. International Journal of Advanced Manufacturing Technology, 94(5), 2457-2474. External link
Touazine, H., Akab, J., Jahazi, M., Tahan, A., Jomaa, W., & Bocher, P. (2017). Modeling of the microstructure alteration induced by hard turning of Inconel 718. International Journal of Advanced Manufacturing Technology, 93(9), 3705-3712. External link
Zaghbani, I., Jomaa, W., Songmene, V., Boire, L. P. L., & Lehuy, H. (2011, July). Investigation on Tool Wear during Dry and Wet Machining of Hardened Mould Steels [Paper]. International Workshop on Computational Mechanics, Materials and Engineering Applications (CMMEA 2011), Kunming, Chine. Published in International Journal of Civil Engineering and Building Materials, 2(3). External link