Documents dont l'auteur est "Fortin, Clément"

A

Abbaszadeh-Mir, Y., Mayer, J. R. R., & Fortin, C. Methodology and Simulation of the Calibration of a Five-Axis Machine Tool Link Geometry and Motion Errors Using Polynomial Modelling and a Telescoping Magnetic Ball-Bar [Communication écrite]. Laser Metrology and Machine Performance VI. Non disponible

B

Benea, R., Cloutier, G., & Fortin, C. (2003). Process Plan Validation Including Process Deviations and Machine-Tool Errors. Dans Geometric Product Specification and Verification: Integration of Functionality (197-206). Lien externe

Benea, R., Fortin, C., & Cloutier, G. (2002). Analyse de tolérances en fabrication tenant compte des dispersions de procédés et des erreurs machines-outils : de la CAO géométrique vers une CAO fonctionnelle. Revue internationale de CFAO et d'informatique graphique, 17(1-2), 39-59. Lien externe

Benea, R., Cloutier, G., & Fortin, C. (avril 2001). Process Plan Validation Including Process Deviations and Machine-tool Errors [Communication écrite]. 7th CIRP International Seminar on Computer Aided Tolerancing, Cachan, France. Non disponible

Bennis, F., Pino, L., & Fortin, C. (1997). Transfert de tolérances géométriques pour la fabrication par une méthode algébrique. Journal Européen des Systèmes Automatisés, 31(8), 1339-1357. Non disponible

Balazinski, M., Ennajimi, E., & Fortin, C. (janvier 1994). Influence of the feed variation on tool wear in interrupted cutting conditions [Communication écrite]. CSME Forum, Montréal, Québec. Non disponible

C

Cloutier, G., Sellens, R. W., Hugo, R. J., Camarero, R., & Fortin, C. (juin 2010). Outcomes Assessment and Curriculum Improvement Through the Cyclical Review of Results - A Model to Satisfy CEAB-2009 Accreditation Requirements [Communication écrite]. Canadian Engineering Education Association (CEEA) Conference, 2010, Queen's University Kingston, Ontario (6 pages). Publié dans Proceedings of the Canadian Engineering Education Association (CEEA). Disponible

Camarero, R., Fortin, C., Huet, G., Raynauld, J., & Gerbe, O. (mars 2009). XML-based course syllabi: An electronic implementation of the CDIO syllabus [Communication écrite]. 1st International Conference on Computer Supported Education, Lisboa, Portugal. Non disponible

Chedmail, P., Cognet, G., Fortin, C., Mascle, C., & Pegna, J. (2002). Integrated design and manufacturing in mechanical engineering. (1ère éd.). Lien externe

Chatelain, J. F., & Fortin, C. (2001). A Balancing Technique for Optimal Blank Part Machining. Precision Engineering, 25(1), 13-23. Lien externe

D

Doumit, N., Fortin, C., & Huet, G. (juillet 2015). Study of the efficiency of product development teams through combined virtual communities of practice, PLM and social media technologies [Communication écrite]. 20th International Conference on Engineering Design (ICED 2015), Milan, Italy. Non disponible

Doumit, N., Huet, G., & Fortin, C. (juillet 2013). The Role of Enterprise Social Media in the Development of Aerospace Industry Best Practices [Communication écrite]. IFIP International Conference on Product Lifecycle Management, 2013, Nantes, France. Lien externe

Deng, X., Huet, G., Tan, S., & Fortin, C. (2012). Product decomposition using design structure matrix for intellectual property protection in supply chain outsourcing. Computers in Industry, 63(6), 632-641. Lien externe

Dupinet, É., Fortin, C., & Morel, C. (août 1994). Methodologies and tools for process planning [Communication écrite]. IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, Ottawa, Ont., Canada. Non disponible

E

Ennajimi, E., Fortin, C., Balazinski, M., & Kraftchenko, I. (janvier 1996). Modélisation de l'erreur d'usinage due aux déplacements élastiques du système machine-pièce-outil [Communication écrite]. Conférence internationale sur les mathématiques appliquées et les sciences de l'ingénieur (CIMASI 1996), Casablanca, Maroc. Non disponible

F

Fortin, C., Feldman, D. E., Cheriet, F., & Labelle, H. (2010). Validity of a Quantitative Clinical Measurement Tool of Trunk Posture in Idiopathic Scoliosis. Spine, 35(19), E988-E994. Lien externe

Fortin, C., & Huet, G. (2007). Manufacturing process management: iterative synchronisation of engineering data with manufacturing realities. International Journal of Product Development, 4(3-4), 280-95. Lien externe

Fortin, C., Mascle, C., Mayer, J. R. R., Cloutier, G., Balazinski, M., Mir, Y. M., & Bélanger, I. (janvier 1997). Interactive computer aided process planning system for manufacturing, assembly and inspection [Communication écrite]. 32nd International MATADOR Conference, Manchester, U.K.. Lien externe

Fortin, C., & Chatelain, J.-F. (avril 1995). A geometrical tolerance verification approach for complex cases including datum shift analysis [Communication écrite]. 4th CIRP Seminar on Computer Aided Tolerancing, Tokyo, Japan. Non disponible

G

Gagné, S., & Fortin, C. (2007). Application of the CMII model to an integrated engineering and manufacturing development environment. International Journal on Interactive Design and Manufacturing (IJIDeM), 1(1), 5-13. Lien externe

Gaudette, P., Cloutier, G., & Fortin, C. (janvier 1999). Validation of a process plan by propagated dispersion zones [Communication écrite]. 6th CIRP International Seminar on Computer-Aided Tolerancing, Netherlands. Non disponible

H

Huet, G., Fortin, C., & Zeng, Y. (juillet 2012). Theoretical foundations supporting the implementation of complementary information structures across the life of a product [Communication écrite]. 11th ASME Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012), Nantes, France. Lien externe

Huet, G., Culley, S. J., Mcmahon, C. A., & Fortin, C. (2007). Making Sense of Engineering Design Review Activities. AI EDAM-Artificial Intelligence for Engineering Design Analysis and Manufacturing, 21(3), 243-266. Lien externe

K

Klim, Z., Ennajimi, E., Balazinski, M., & Fortin, C. (1996). Cutting tool reliability analysis for variable feed milling of 17-4PH stainless steel. Wear, 195(1-2), 206-213. Lien externe

M

Meskoob, B., Brovar, Y., Menshenin, Y., Blanchard, F., & Fortin, C. (avril 2023). Interface Management for Telecommunication System Design through OPM and DSM-based Approaches [Communication écrite]. IEEE International Systems Conference (SysCon 2023), Vancouver, BC, Canada (8 pages). Lien externe

Menshenin, Y., Moreno, C., Brovar, Y., & Fortin, C. (2021). Integration of MBSE and PLM: complexity and uncertainty. International Journal of Product Lifecycle Management, 13(1), 66-88. Lien externe

McSorley, G., Huet, G., Culley, S. J., & Fortin, C. (août 2009). Application of failure modes and effects analysis to support product in-use information feedback [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference (DETC 2009), San Diego, CA. Lien externe

Mir, Y. A., Mayer, J. R. R., Cloutier, G., & Fortin, C. (2002). Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar. International Journal of Production Research, 40(18), 4781-4797. Lien externe

Mir, Y. A., Mayer, J. R. R., & Fortin, C. (2002). Tool path error prediction of a five-axis machine tool with geometric errors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(5), 697-712. Lien externe

Mayer, J. R. R., Mir, Y. A., & Fortin, C. (janvier 2000). Calibration of a five-axis machine tool for position independent geometric error parameters using a telescoping magnetic ball bar [Communication écrite]. 33rd International MATADOR Conference, Manchester, United Kingdom. Lien externe

Mascle, C., Fortin, C., Daliaire, D., & Morissette, S. (juin 1999). Évaluation des gammes d'assemblage par l'analyse écomonique [Communication écrite]. 3e conférence internationale sur l'automatisation industrielle, Montréal, Québec. Non disponible

Mayer, J. R. R., Andrian, R., Cloutier, G., & Fortin, C. (janvier 1998). Artefact probing for machine tool and process diagnosis [Communication écrite]. 13th Annual Meeting American Society for Precision Engineering, St-Louis, Missouri. Non disponible

Mascle, C., DeGuire, B., & Fortin, C. (janvier 1998). Étude des systèmes multi-agents pour la recherche de solutions d'assemblage [Communication écrite]. Forum SCGM, Toronto, Ontario. Non disponible

Mayer, J. R. R., Andrian, R., Fortin, C., & Cloutier, G. (janvier 1998). Machine tool capability diagnostic by touch probing [Communication écrite]. CSME Forum, Toronto, Canada. Non disponible

Mascle, C., Caron, M.-C., & Fortin, C. (janvier 1998). STEP evalutation methodology for companies [Communication écrite]. 2nd International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 1998), Compiègne, France. Non disponible

Mayer, J. R. R., Andrian, R., Fortin, C., Cloutier, G., & Luong, T. (juillet 1997). Performance verification and monitoring of nc machine-tools for in-process part measurement by touch probing [Communication écrite]. 32nd International MATADOR Conference, Manchester, UK. Lien externe

Mayer, J. R. R., Cloutier, G., & Fortin, C. (1997). Quadrilateration and measurement site identification with dual scanning axis laser tracking interferometers. Measurement: Journal of the International Measurement Confederation, 20(3), 171-187. Lien externe

P

Pino, L., Bennis, F., & Fortin, C. (avril 2001). Calculation of virtual and resultant parts for variational assembly analysis [Communication écrite]. 7th CIRP International Seminar on Computer-Aided Tolerancing, Cachan, France. Lien externe

R

Rivest, L., Dupinet, É., Fortin, C., & Morel, C. (1994). Analysis of product tolerances for process plan validation. Manufacturing Review, 7(4), 312-331. Non disponible

Rivest, L., Fortin, C., & Morel, C. (1994). Tolerancing a solid model with a kinematic formulation. Computer Aided Design, 26(6), 465-476. Lien externe

S

Samadi, B., Raison, M., Achiche, S., & Fortin, C. (2020). Identification of the most relevant intervertebral effort indicators during gait of adolescents with idiopathic scoliosis. Computer Methods in Biomechanics and Biomedical Engineering, 23(10), 664-674. Lien externe

Spooner, D., Huet, G., Fortin, C., Vadean, A., & Niewoehner, R. (juin 2009). The assessment of engineering reasoning recorded in student engineering design journal [Communication écrite]. 5th International CDIO Conference, Singapore. Lien externe

Salako, F., Aubin, C.-É., Fortin, C., & Labelle, H. (2003). Développement de guides chirurgicaux personnalisés, par prototypage, pour l'installation de vis pédiculaires. ITBM-RBM, 24(4), 199-205. Lien externe

Salako, F., Aubin, C.-É., Fortin, C., & Labelle, H. (mai 2000). Feasibility Study of Patient-Specific Surgical Templates for the Fixation of Pedicle Screws [Communication écrite]. 3rd Biannual Meeting of the International Research Society of Spinal Deformities (IRSSD 2000), Clermont Ferrand, France. Lien externe

Salako, F., Aubin, C.-É., Fortin, C., & Labelle, H. (2000). Feasibility Study of Patient-Specific Surgical Templates for the Fixation of Pedicle Screws. Archives of Physiology and Biochemistry, 108(1-2), 197-197. Lien externe

T

Toche, B., Pellerin, R., & Fortin, C. (2020). Set-based design: a review and new directions. Design Science, 6, 41 pages. Disponible

Toche, B., Fortin, C., Pellerin, R., & McSorley, G. (2017). A framework to support collaboration during prototyping and testing. International Journal of Product Lifecycle Management, 10(4), 348-374. Lien externe

Tan, S., Zeng, Y., Huet, G., & Fortin, C. (août 2013). Effective Reverse Engineering of Qualitative Design Knowledge: A Case Study of Aerospace Pylon Design [Communication écrite]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2013), Portland, Oregon, USA (12 pages). Lien externe

Toche, B., Pellerin, R., Fortin, C., & Huet, G. (juillet 2012). Set-based prototyping with digital mock-up technologies [Communication écrite]. 9th IFIP WG 5.1 International Conference on Product Lifecycle Management (PLM 2012), Montréal, Québec. Lien externe

V

Vadean, A., Leray, D., Lakiss, H., & Guillot, J. (mai 2000). A Hybrid Calculation Model for Bolted Assemblies Used for Slewing Bearings [Communication écrite]. Third IDMME Conference, Montreal, Canada. Lien externe