 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Esmati, K., Chakraborty, A., Pendurti, S., Natarajan, A., & Martin, É. (2024). Anisotropic sintering behavior of stainless steel 316L printed by binder jetting additive manufacturing. Materials Today Communications, 41, 110528 (13 pages). Lien externe
Paques, M., Chakraborty, A., Changeux, B., Miao, H. Y., Muhammad, W., Turenne, S., Inal, K., & Martin, É. (2024). Comparative assessment of Ti-6Al-4 V titanium alloy fatigue life improvement by vibratory peening, shot peening, and vibratory finishing. Fatigue & Fracture of Engineering Materials & Structures, 14447 (19 pages). Lien externe
Tangestani, R., Chakraborty, A., Sabiston, T., Yuan, L., Ghasri-Khouzani, M., & Martin, É. (2023). Multi-Scale Model to Simulate Stress Directionality in Laser Powder Bed Fusion: Application to Thin-Wall Part Failure. Materials & Design, 232, 112147 (17 pages). Disponible
Tangestani, R., Chakraborty, A., Sabiston, T., Yuan, L., & Martin, É. (2023). Buckling mechanism simulation for thin-wall components made by laser powder bed fusion. Key Engineering Materials, 964, 6 pages. Lien externe
Im, S., Ghasri-Khouzani, M., Muhammad, W., Batmaz, R., Esmati, K., Chakraborty, A., Natarajan, A., & Martin, É. (2023). Evaluation of Different Sintering Agents for Binder Jetting of Aluminum Alloy. Journal of Materials Engineering and Performance, 32(21), 9550-9560. Lien externe
Chakraborty, A., Tangestani, R., Esmati, K., Sabiston, T., Yuan, L., & Martin, É. (2023). Mitigating inherent micro-cracking in laser additively manufactured RENE 108 thin-wall components. Thin-Walled Structures, 184, 110514 (11 pages). Lien externe
Chakraborty, A., Muhammad, W., Masse, J.-P., Tangestani, R., Ghasri-Khouzani, M., Wessman, A., & Martin, É. (2023). Role of alloy composition on micro-cracking mechanisms in additively manufactured Ni-based superalloys. ACTA Materialia, 255, 16 pages. Lien externe
Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). Correction to: An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts (vol 53, pg 915, 2022). Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 53(5), 1919-1919. Lien externe
Chakraborty, A., Tangestani, R., Batmaz, R., Muhammad, W., Plamondon, P., Wessman, A., Yuan, L., & Martin, E. (2022). In-process failure analysis of thin-wall structures made by laser powder bed fusion additive manufacturing. Journal of Materials Science and Technology, 98, 233-243. Lien externe
Batmaz, R., Zardoshtian, A., Sabiston, T. D., Tangestani, R., Chakraborty, A., Krutz, N., Pendurti, S., Natarajan, A., & Martin, É. (2022). An Investigation into Sinterability Improvements of 316L Binder Jet Printed Parts. Metallurgical and Materials Transactions A, 53(3), 915-926. Lien externe
Chakraborty, A., Tangestani, R., Muhammad, W., Sabiston, T., Masse, J.-P., Batmaz, R., Wessman, A., & Martin, É. (2022). Micro-cracking mechanism of RENE 108 thin-wall components built by laser powder bed fusion additive manufacturing. Materials Today Communications, 30, 103139 (14 pages). Lien externe
Tangestani, R., Sabiston, T., Chakraborty, A., Muhammad, W., Lang, Y., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 1- Thermal Model. Frontiers in Materials, 8, 753040 (14 pages). Disponible
Tangestani, R., Sabiston, T., Chakraborty, A., Yuan, L., Krutz, N., & Martin, É. (2021). An Efficient Track-Scale Model for Laser Powder Bed Fusion Additive Manufacturing: Part 2-Mechanical Model. Frontiers in Materials, 8, 759669 (14 pages). Lien externe
Sadallah, A., Miao, H.-Y., Changeux, B., Bitar-Nehme, E., Chakraborty, A., Turenne, S., & Martin, É. (mars 2024). Effect of Shot Peening and High-Temperature Shot Peening on the High Cycle Fatigue of 7010-T7452 Aluminum Alloy [Communication écrite]. Light Metals 2024 (TMS 2024), Orlando, FL, USA. Lien externe
Karimialavijeh, H., Chakraborty, A., Proebstle, M., & Martin, É. (janvier 2024). Effect of Shot Peening on Fatigue Properties of A20X Fabricated by Laser Powder Bed Fusion [Communication écrite]. Light Metal 2024 (TMS 2024). Lien externe
Karimialavijeh, H., Chakraborty, A., Proebstle, M., Oishi, K., Harvey, J.-P., & Martin, É. (janvier 2024). Heat Treatment of A20X Alloy Manufactured Using Laser Powder Bed Fusion [Communication écrite]. Light Metal 2024 (TMS 2024). Lien externe
Esmati, K., Chakraborty, A., Pendurti, S., Natarajan, A., & Martin, É. (mars 2024). Influence of Temperature and Print Orientation on Anisotropic Sintering in Binder Jet SS316L [Communication écrite]. 153rd Annual Meeting & Exhibition Supplemental Proceedings (TMS 2024), Orlando, FL, USA. Lien externe
Karimialavijeh, H., Ghasri-Khouzani, M., Chakraborty, A., Harvey, J.-P., & Martin, É. (mars 2023). Comparison of Additively Manufactured and Cast Aluminum A205 Alloy [Communication écrite]. Light Metals Symposium held at the TMS Annual Meeting and Exhibition (TMS 2023), San Diego, CA, USA. Lien externe
Chakraborty, A., Tangestani, R., Sabiston, T., Krutz, N., Yuan, L., & Martin, É. (février 2022). Effect of Build Height on Micro-cracking of Additively Manufactured Superalloy RENÉ 108 Thin-Wall Components [Communication écrite]. 151st TMS Meeting & Exhibition - Supplemental Proceedings (TMS 2022), Anaheim, California, USA. Lien externe
