<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Boukhili, Rachid"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Nombre de documents: 87

Ouadday, R., Abusrea, M., Boukhili, R., & Vadean, A. (2023). Modeling of the effect of ATH fillers on the rheology, curing kinetics, and flexural properties of the epoxy resin forming the hydraulic turbines' stay vanes extension. Mechanics of Advanced Materials and Structures, 15 pages. Lien externe

Gamdani, F., Boukhili, R., & Vadean, A. (2022). Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates. International Journal of Fatigue, 158, 10 pages. Lien externe

Mehrabian, M., & Boukhili, R. (2022). Full-field through-the-thickness strain distribution study of hybrid multi-bolted/bonded single-lap composite joints using digital image correlation. Composites Part a-Applied Science and Manufacturing, 163, 107242 (11 pages). Lien externe

Vadean, A., Abusrea, M., Shazly, M., Michel, A., Kaabi, A., & Boukhili, R. (2022). Improvement of scarf repair patch shape for composite aircraft structures. Journal of Adhesion Science and Technology, 99(6), 1044-1070. Lien externe

Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573. Lien externe

Mehrabian, M., & Boukhili, R. (2021). 3D-DIC strain field measurements in bolted and hybrid bolted-bonded joints of woven carbon-epoxy composites. Composites Part B: Engineering, 218, 12 pages. Lien externe

Dega, C., Boukhili, R., Leger, K., Laviolette, J.-P., & Jadidinia, A. (octobre 2021). Recycling of carbon fiber reinforced plastics by microwave pyrolysis [Communication écrite]. 8th Annual Composites and Advanced Materials Expo (CAMX 2021), Dallas, TX, USA. Lien externe

Mehrabian, M., & Boukhili, R. (2020). Quantifying of secondary bending effect in multi-bolt single-lap carbon-epoxy composite joints via 3D-DIC. Composites Science and Technology, 200, 108453 (8 pages). Lien externe

Gamdani, F., Boukhili, R., & Vadean, A. (2019). Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates. International Journal of Adhesion and Adhesives, 95, 11 pages. Lien externe

Lebel, L., Boukhili, R., & Turenne, S. (2018). Damage to an A-N720 ceramic matrix composite under simulated gas turbine static component conditions using laser heating. Journal of Composite Materials, 52(30), 4127-4138. Lien externe

Ouadday, R., Marouene, A., Morada, G., Kaabi, A., Boukhili, R., & Vadean, A. (2018). Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications. Composite Structures, 185, 254-263. Lien externe

Marouene, A., Legay, P., & Boukhili, R. (2017). Experimental and numerical investigation on the open-hole compressive strength of AFP composites containing gaps and overlaps. Journal of Composite Materials, 51(26), 3631-3646. Lien externe

Lebel, L., Turenne, S., & Boukhili, R. (2017). An experimental apparatus and procedure for the simulation of thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites. Journal of Engineering for Gas Turbines and Power, 139(9), 11 pages. Lien externe

Morada, G., Vadean, A., & Boukhili, R. (2017). Failure mechanisms of a sandwich beam with an ATH/epoxy core under static and dynamic three-point bending. Composite Structures, 176, 281-293. Lien externe

Bousfia, M., Aboussaleh, M., Ouhbi, B., & Boukhili, R. (2017). Fatigue life prediction for composite materials under Ergodic Gaussian and Stationary Random (EGSR) loads. Composites: Mechanics, Computations, Applications, 8(3), 181-206. Lien externe

Rafiq, A., Merah, N., Boukhili, R., & Al-Qadhi, M. (2017). Impact resistance of hybrid glass fiber reinforced epoxy/nanoclay composite. Polymer Testing, 57, 1-11. Lien externe

Morada, G., Ouadday, R., Vadean, A., & Boukhili, R. (2017). Low-velocity impact resistance of ATH/epoxy core sandwich composite panels: Experimental and numerical analyses. Composites Part B: Engineering, 114, 418-431. Lien externe

Gamdani, F., Boukhili, R., & Vadean, A. (août 2017). Tensile behavior of hybrid multi-bolted/bonded joints with carbon/epoxy composites [Communication écrite]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Non disponible

Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Buckling behavior of variable-stiffness composite laminates manufactured by the tow-drop method. Composite Structures, 139, 243-253. Disponible

Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (août 2016). Effect of alumina trihydrate concentration on physical and mechanical properties of ATH/vinylester composite [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. Lien externe

Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (août 2016). Effect of alumina trihydrate particle size on physical and mechanical properties of ATH/vinylester composite [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics, Montréal, Québec. Non disponible

Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (2016). Effects of gaps and overlaps on the buckling behavior of an optimally designed variable-stiffness composite laminates - A numerical and experimental study. Composite Structures, 140, 556-566. Lien externe

Morada, G., Marouene, A., Vadean, A., & Boukhili, R. (août 2016). Numerical analysis on compression failure mechanisms of impacted non-crimp fabric reinforced composites [Communication écrite]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. Lien externe

Farid, G., Boukhili, R., & Vadean, A. (juillet 2016). Static and fatigue behavior multi-bolted/bonded single-lap joints in woven composite plates [Communication écrite]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Non disponible

Gamdani, F., Boukhili, R., & Vadean, A. (2015). Tensile strength of open-hole, pin-loaded and multi-bolted single-lap joints in woven composite plates. Materials & Design, 88, 702-712. Lien externe

Lebel, L., Turenne, S., & Boukhili, R. (mai 2015). Testing ceramic matrix composites for gas turbine combustion chamber panels [Communication écrite]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec. Non disponible

Lebel, L., Turenne, S., & Boukhili, R. (mai 2015). Thermal stresses in gas turbine combustion chamber panels made of ceramic matrix composites [Communication écrite]. 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference, Montréal, Québec. Non disponible

Hammoud, R., Boukhili, R., & Yahia, A. (2014). Chemoplastic modelling for concrete at high temperature. Journal of Structural Fire Engineering, 5(2), 135-146. Lien externe

Gordon, S., Boukhili, R., & Merah, N. (2014). Impact behavior and finite element prediction of the compression after impact strength of foam/vinylester-glass composite sandwiches. Journal of Sandwich Structures and Materials, 16(5), 551-574. Lien externe

Hammoud, R., Yahia, A., & Boukhili, R. (2014). Triaxial compressive strength of concrete subjected to high temperatures. Journal of Materials in Civil Engineering, 26(4), 705-712. Lien externe

Hammoud, R., Boukhili, R., & Yahia, A. (2013). Unified formulation for a triaxial elastoplastic constitutive law for concrete. Materials, 6(9), 4226-4248. Disponible

Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (avril 2013). Buckling analysis of variable stiffness composites plates under non-uniform compression loads using the differential quadrature method [Communication écrite]. 1st International Symposium on Automated Composites Manufacturing, Montréal, Québec. Non disponible

Marouene, A., Boukhili, R., Chen, J., & Yousefpour, A. (juillet 2013). An experimental investigation on buckling behavior of variable angle tow laminates subjected to uniform compression load [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ouadday, R., Boukhili, R., & Vadean, A. (octobre 2013). Investigation of thick multicore sandwich constructions under low velocity impact and static indentation [Communication écrite]. Symposium on Advances in Hydroelectric Turbine Manufacturing and Repair, Montréal, Québec. Non disponible

Hammoud, R., Boukhili, R., & Yahia, A. (mai 2012). 3D constitutive law of concrete-Unified formulation [Communication écrite]. International Conference on Numerical Modeling Strategies for Sustainable Concrete Structures (SSCS 2012), Aix-en-Provence, France. Non disponible

Hammoud, R., Boukhili, R., & Yahia, A. (juin 2012). Chemoplastic modeling for concrete at high temperature : proceedings [Communication écrite]. 7th International Conference on Structures in Fire, Zurich, Switzerland. Non disponible

Legay, P., Boukhili, R., Hojjati, M., & Chen, J. (septembre 2011). Impact and compression behaviour of AFP manufactured carbon/epoxy composites containing gaps and overlaps [Communication écrite]. American Society for Composites 26 th Annual Technical Conference/2nd Joint US-Canada Conference on Composites, Montréal, Québec. Non disponible

Daly, H. B., Harchay, M., Belhadjsalah, H., & Boukhili, R. (2009). Experimental characterization and numerical simulation of the humidity absorption process in glass reinforced composites under dissymmetric exposure conditions. Polymer Composites, 30(12), 1825-1836. Lien externe

Zebdi, O., Boukhili, R., & Trochu, F. (2009). An inverse approach based on laminate theory to calculate the mechanical properties of braided composites. Journal of Reinforced Plastics and Composites, 28(23), 2911-2930. Lien externe

Zebdi, O., Boukhili, R., & Trochu, F. (2009). Optimum design of a composite helical spring by multi-criteria optimization. Journal of Reinforced Plastics and Composites, 28(14), 1713-1732. Lien externe

Gordon, S., & Boukhili, R. (juillet 2008). Low velocity impact characterization of a foam core composite sandwich with an E_Glass fabric/vinyl ester laminates skins [Communication écrite]. 7th Canada Japan Workshop on Composites, Shonan university in Fujisawa. Lien externe

Ben Daly, H., Hfaied, N., Zidi, M., Guelorget, B., & Boukhili, R. (2008). Nanoindentation of Dry and Aged Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 29(11), 1218-1226. Lien externe

Ben Daly, H., Ben Brahim, H., Hfaied, N., Harchay, M., & Boukhili, R. (2007). Investigation of water absorption in pultruded composites containing fillers and low profile additives. Polymer Composites, 28(3), 355-364. Lien externe

Boukhili, R., Taib, A. A., Achiou, S., Gordon, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part I. Effect of specimen configuration, adhesive thickness, spew fillet and adherend stiffness on fracture. International Journal of Adhesion and Adhesives, 26(4), 226-236. Lien externe

Boukhili, R., Taib, A. A., Achiou, S., & Boukehili, H. (2006). Bonded joints with composite adherends. Part II. Finite element analysis of joggle lap joints. International Journal of Adhesion and Adhesives, 26(4), 237-248. Lien externe

Boukhili, R., Boukehili, H., Ben Daly, H., & Gasmi, A. (2006). Physical and Mechanical Properties of Pultruded Composites Containing Fillers and Low Profile Additives. Polymer Composites, 27(1), 71-81. Lien externe

Ben Daly, H., Ben Brahim, H., Hfaeid, N., Harchay, M., & Boukhili, R. (août 2005). Caractérisation expérimentale des profils d'humidité à travers l'épaisseur des composites vieillis [Communication écrite]. 17e Congrès français de mécanique, Troyes, France. Non disponible

Charlebois, K. M., Boukhili, R., Zebdi, O., Trochu, F., & Gasmi, A. (2005). Evaluation of the physical and mechanical properties of braided fabrics and their composites. Journal of Reinforced Plastics and Composites, 24(14), 1539-1554. Lien externe

Boukhili, R., Boukehili, H., Gauvin, R., Ben Daly, H., & Gasmi, A. Effect of Fillers and Low Profile Additives on the Bending of Pultruded Composites [Communication écrite]. High Performance Structures and Materials II. Lien externe

Vangrimde, B., & Boukhili, R. (2003). Descriptive Relationships Between Bearing Response and Macroscopic Damage in Grp Bolted Joints. Composites. Part B, Engineering, 34(7), 593-605. Lien externe

Vangrimde, B., & Boukhili, R. (2002). Analysis of the Bearing Response Test for Polymer Matrix Composite Laminates: Bearing Stiffness Measurement and Simulation. Composite Structures, 56(4), 359-374. Lien externe

Vangrimde, B., & Boukhili, R. (septembre 2002). Bearing response and macroscopic damage in GRP bolted joints [Communication écrite]. Conference on Fracture of polymers, composites and adhesives (ESIS TC4 2002), Les Diablerets, Switzerland. Non disponible

Vangrimde, B., & Boukhili, R. (2002). Bearing Stiffness of Glass Fibre-Reinforced Polyester: Influence of Coupon Geometry and Laminate Properties. Composite Structures, 58(1), 57-73. Lien externe

Riopel, S., & Boukhili, R. (août 2001). Crack formation in compression moulding of thick composite materials [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe

Gordon, S., Boukhili, R., & Trochu, F. (août 2001). Effect of additives on the surface aspects of RTM moulded composites [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, Québec. Lien externe

Ouddane, M., & Boukhili, R. (août 2001). Effect of filler content on the mechanical properties of epoxy based adhesives [Communication écrite]. 3rd Canadian International Composite Conference (CANCOM 2001), Montréal, QC, Canada. Lien externe

Boukhili, R., & Atarsia, A. (2000). Effect of pulling speed on the sizes of the liquid, gel and solid zone during thermoset pultrusion. Journal of Reinforced Plastics and Composites, 19(18), 1493-1503. Lien externe

Atarsia, A., & Boukhili, R. (2000). Relationship Between Isothermal and Dynamic Cure of Thermosets Via the Isoconversion Representation. Polymer Engineering and Science, 40(3), 607-620. Lien externe

Vangrimde, B., & Boukhili, R. (janvier 1999). Bolted joint fracture modes in glass-fiber reinforced polyester [Communication écrite]. 12th international conference on composite materials, Paris, France. Lien externe

Atarsia, A., & Boukhili, R. Effect of pulling speed on the sizes of the liquid, gel and solid zone during thermoset pultrusion [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1999). Non disponible

Vangrimde, B., & Boukhili, R. (janvier 1999). Measuring bolted joint bearing deformation and stiffness [Communication écrite]. 12th international conference on composite materials, Paris, France. Lien externe

Reymond, S., & Boukhili, R. New approach to determining the boundary between the liquid and gelatinous zones in a pultrusion die [Communication écrite]. Annual Technical Conference of the Society of Plastics Engineers (ANTEC 1999). Non disponible

Boukhili, R., & Elomari, S. Newly developed metallic composites for automotive applications [Communication écrite]. 32nd ISATA Symposium Abstracts. Non disponible

Boukhili, R., & Ouddane, M. (1999). Proposal for a torsion shear fixture for bonded joints. Journal of Materials Science, 34(11), 2719-2727. Lien externe

Boukhili, R., & Aboussaleh, M. (1998). The contact behavior between laminated composites and rigid impactors. Composite Structures, 43(3), 165-178. Lien externe

Adimi, R., & Boukhili, R. (janvier 1998). Influence of resin and temperature on the interlaminar shear fatigue of glass fibre reinforced composite rods [Communication écrite]. International Conference on Durability of FRP Composites for Construction, Sherbrooke, Canada. Non disponible

Aboussaleh, M., & Boukhili, R. (1998). Life Prediction for Composite Laminates Submitted to Service Loading Spectra. Polymer Composites, 19(3), 241-245. Lien externe

Ouddane, M., & Boukhili, R. (1998). Moisture Absorption Effect on Adhesive Filled Bonded Joints. Polymer Composites, 19(6), 680-688. Lien externe

Atarsia, A., & Boukhili, R. (janvier 1998). New approach relating isothermal and dynamic cure of thermosets [Communication écrite]. 5th International Conference on Composite Engineering (ICCE 1998), Las Vegas, Nevada. Non disponible

Boukhili, R., & Elomari, S. (juin 1997). Characterization of metal matrix composites by thermal analysis techniques [Communication écrite]. 30th ISATA. Materials for Energy-Efficient Vehicles; Paint and Powder Coating Applications in the Automotive Industries, Florence, Italy. Non disponible

Ouddane, M., Boukhili, R., & Gauvin, R. (mai 1997). Effect of filler content on the lap shear strength of epoxy based adhesives [Communication écrite]. 42nd International SAMPE Symposium and Exhibition, Anaheim, CA, USA. Non disponible

Elomari, S., Boukhili, R., San Marchi, C., Mortensen, A., & Lloyd, D. J. (1997). Thermal expansion responses of pressure infiltrated SiC/Al metal-matrix composites. Journal of Materials Science, 32(8), 2131-2140. Lien externe

Aboussaleh, M., & Boukhili, R. (janvier 1996). Life prediction for composite laminates subjected to service loading spectra [Communication écrite]. Composites 1996 and Oriented Polymers Symposium, Boucherville, Québec. Non disponible

Atarsia, A., Boukhili, R., & Blaise, E. (janvier 1996). Relationships between DSC and DMA of undercured composites [Communication écrite]. 3rd International Conference on Composites Engineering, New Orleans, Louisiana. Non disponible

Elomari, S., Boukhili, R., & Lloyd, D. J. (1996). Thermal expansion studies of prestrained Al₂O₃/Al metal matrix composite. ACTA Materialia, 44(5), 1873-1882. Lien externe

Elomari, S., Boukhili, R., Skibo, M. D., & Masounave, J. (mai 1995). Dynamic mechanical analysis of prestrained Al₂O₃/Al metal matrix composite [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Elomari, S., Boukhili, R., Skibo, M. D., & Masounave, J. (1995). Dynamic mechanical analysis of prestrained Al₂O₃/Al metal-matrix composite. Journal of Materials Science, 30(12), 3037-3044. Lien externe

Atarsia, A., Boukhili, R., & Gauvin, R. (janvier 1995). Effect of fillers on the shear and flexural properties of unidirectional fiber pultruded composites [Communication écrite]. EURO-FILLERS 1995, Mulhouse, France. Non disponible

Boukhili, R., Champoux, L., & Martin, S. Effect of water absorption on the low energy repeated impact of carbon/epoxy laminates [Communication écrite]. International Conference on Progress in Durability Analysis of Composite Systems (DURACOSYS 1995), Bruxelles, Belgique. Non disponible

Elomari, S., Boukhili, R., Lloyd, D. J., & Masounave, J. (mai 1995). Thermal expansion studies of prestrained Al₂O₃/Al metal matrix composite [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible

Elomari, S., Boukhili, R., Skibo, M. D., & Masounave, J. (août 1995). Thermomechanical studies of prestrained Al₂O₃/Al metal matrix composite [Communication écrite]. 10th International Conference on Composite Materials, Vancouver, BC. Lien externe

Boukhili, R., Bojji, C., & Gauvin, R. (1994). Fatigue mechanisms under low energy repeated impact of composite laminates. Journal of Reinforced Plastics and Composites, 13(10), 856-870. Lien externe

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Finite element simulation of impact tests of laminated composite plates. Composite Structures, 28(1), 47-59. Lien externe

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response analysis of laminated composite plates using the finite element method: a parametric study. Journal of the Institution of engineers, 75, 87-91. Non disponible

Lakshminarayana, H. V., Boukhili, R., & Gauvin, R. (1994). Impact response of laminated composite plates: prediction and verification. Composite Structures, 28(1), 61-72. Lien externe

Boukhili, R., Bojji, C., & Gauvin, R. (avril 1994). Impact-fatigue in graphite/epoxy composites laminates [Communication écrite]. 39th International SAMPE, CA. Non disponible

Bojji, C., Boukhili, R., & Gauvin, R. (1992). Endommagement par chocs répétés de composites unidirectionnels. (Rapport technique n° EPM-RT-92-24). Accès restreint

Liste produite: Fri Mar 29 04:14:35 2024 EDT.