<  Back to the Polytechnique Montréal portal

Items where Author is "Bocher, Philippe"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | D | F | G | J | L | M | P | S | T
Number of items: 31.

A

Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., & Bocher, P. (2016). Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld. Metallography, Microstructure, and Analysis, 5(1), 50-61. External link

Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., Germain, L., & Bocher, P. (2016). Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal. Materials Characterization, 111, 128-136. External link

B

Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. External link

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. External link

Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. External link

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2017, September). Study of short crack growth in shot peened 300M steel [Paper]. 13th International Conference on Shot Peening, Montréal, Québec. External link

Bretin, R., Bocher, P., & Lévesque, M. (2016, August). Development of a cellular automaton for a better consideration of elastic neighborhood effect in polycrystals [Paper]. 10th International Conference on Computational Methods (ICCM 2016), Berkeley, Calif.. External link

D

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843. External link

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2016, August). Comparison of two X-ray residual stress measurement methods: sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant [Paper]. 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia (6 pages). Available

F

Foroozmehr, F., Verreman, Y., Chen, J., Thibault, D., & Bocher, P. (2017). Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels. Engineering Fracture Mechanics, 175, 262-278. External link

G

Giard, G., Tousignant, M., McMeekin, K., Bellotto, F., Bocher, P., & Sirois, F. (2022). Power-Equivalent Complex Permeability Model for Nonlinear and Hysteretic Materials in the Frequency Domain for Induction Heating Applications. IEEE Transactions on Magnetics, 58(6), 1-9. External link

J

Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. External link

Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (2018, May). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Paper]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Published in MATEC Web of Conferences, 165. Available

Jomaa, W., Songmene, V., Bocher, P., & Gakwaya, A. (2017, September). FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 [Paper]. 9th International Congress on Precision Machining (ICPM 2017), Athènes, Grèce. Published in Solid State Phenomena, 261. External link

Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2017). Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy. Journal of Manufacturing Processes, 26, 446-458. External link

Jomaa, W., Lévesque, J., Bocher, P., Divialle, A., & Gakwaya, A. (2017). Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis. International Journal of Advanced Manufacturing Technology, 91(1), 931-942. External link

Jomaa, W., Songmene, V., & Bocher, P. (2017). Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals. Machining Science and Technology, 21(3), 335-361. External link

Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (2016, July). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Paper]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic. External link

Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2016, September). Finite element analysis of serrated chip formation in machining of 7075-t651 aluminum alloy [Paper]. International Mineral Processing Congress (IMPC 2016), Québec, Québec. Unavailable

Jomaa, W., Songmene, V., & Bocher, P. (2016). An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations. Journal of Materials Engineering and Performance, 25(3), 1010-1027. External link

Jomaa, W., Songmene, V., & Bocher, P. (2016). An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel. Materials and Manufacturing Processes, 31(7), 838-844. External link

Jomaa, W., Daoud, M., Songmene, V., Bocher, P., & Châtelain, J.-F. (2014, November). Identification and Validation of Marusich's Constitutive Law for Finite Element Modeling of High Speed Machining [Paper]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec (6 pages). External link

Jomaa, W., Songmene, V., & Bocher, P. (2014). Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials, 7(3), 1603-1624. External link

L

Lapalme, M., Hoseini, M., Bocher, P., Colle, A. R., & Lévesque, M. (2014). Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys. Experimental Mechanics, 54(5), 841-855. External link

M

McMeekin, K., Sirois, F., Tousignant, M., & Bocher, P. (2016, May). Improving the accuracy of time-harmonic FE simulations in induction heating applications : Towards better ferromagnetic material models [Paper]. International Conference on Heating by Electromagnetic Sources (HES 2016), Padova, Italy. Published in International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), 36(2). External link

Mokhtabad Amrei, M., Verreman, Y., Bridier, F., Thibault, D., & Bocher, P. (2015). Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints. Metallography, Microstructure, and Analysis, 4(3), 207-218. External link

P

Paquin, M., Thibault, D., Bocher, P., Lévesque, J.-B., Verreman, Y., & Shinozaki, K. (2015). Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds. Welding in the World, 59(4), 521-532. External link

S

Slamani, F., Thibault, D., Verreman, Y., & Bocher, P. (2022). A new morphology of retained austenite obtained by intercritical tempering of 13Cr-4Ni martensitic stainless steel. Materials Characterization, 193, 19 pages. External link

T

Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. External link

Touazine, H., Akab, J., Jahazi, M., Tahan, A., Jomaa, W., & Bocher, P. (2017). Modeling of the microstructure alteration induced by hard turning of Inconel 718. International Journal of Advanced Manufacturing Technology, 93(9), 3705-3712. External link

Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. External link

List generated on: Tue Jul 23 08:23:19 2024 EDT