Documents dont l'auteur est "Bocher, Philippe"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Nombre de documents: 31

Slamani, F., Thibault, D., Verreman, Y., & Bocher, P. (2022). A new morphology of retained austenite obtained by intercritical tempering of 13Cr-4Ni martensitic stainless steel. Materials Characterization, 193, 19 pages. Lien externe

Giard, G., Tousignant, M., McMeekin, K., Bellotto, F., Bocher, P., & Sirois, F. (2022). Power-Equivalent Complex Permeability Model for Nonlinear and Hysteretic Materials in the Frequency Domain for Induction Heating Applications. IEEE Transactions on Magnetics, 58(6), 1-9. Lien externe

Bag, A., Delbergue, D., Ajaja, J., Bocher, P., Lévesque, M., & Brochu, M. (2020). Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes. International Journal of Fatigue, 130, 12 pages. Lien externe

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843. Lien externe

Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. Lien externe

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. Lien externe

Bianchetti, C., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2018). Analytical fatigue life prediction of shot peened AA 7050-T7451. International Journal of Fatigue, 118, 271-281. Lien externe

Tu, F., Delbergue, D., Klotz, T., Bag, A., Miao, H., Bianchetti, C., Brochu, M., Bocher, P., & Lévesque, M. (2018). Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials. International Journal of Mechanical Sciences, 145, 353-366. Lien externe

Javadi, H., Jomaa, W., Dalgaard, E., Brochu, M., & Bocher, P. (mai 2018). Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy [Communication écrite]. 12th International Fatigue Congress (FATIGUE 2018), Poitiers, France (6 pages). Publié dans MATEC Web of Conferences, 165. Disponible

Foroozmehr, F., Verreman, Y., Chen, J., Thibault, D., & Bocher, P. (2017). Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels. Engineering Fracture Mechanics, 175, 262-278. Lien externe

Jomaa, W., Songmene, V., Bocher, P., & Gakwaya, A. (septembre 2017). FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 [Communication écrite]. 9th International Congress on Precision Machining (ICPM 2017), Athènes, Grèce. Publié dans Solid State Phenomena, 261. Lien externe

Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2017). Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy. Journal of Manufacturing Processes, 26, 446-458. Lien externe

McMeekin, K., Sirois, F., Tousignant, M., & Bocher, P. (mai 2016). Improving the accuracy of time-harmonic FE simulations in induction heating applications : Towards better ferromagnetic material models [Communication écrite]. International Conference on Heating by Electromagnetic Sources (HES 2016), Padova, Italy. Publié dans International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), 36(2). Lien externe

Touazine, H., Akab, J., Jahazi, M., Tahan, A., Jomaa, W., & Bocher, P. (2017). Modeling of the microstructure alteration induced by hard turning of Inconel 718. International Journal of Advanced Manufacturing Technology, 93(9), 3705-3712. Lien externe

Jomaa, W., Lévesque, J., Bocher, P., Divialle, A., & Gakwaya, A. (2017). Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis. International Journal of Advanced Manufacturing Technology, 91(1), 931-942. Lien externe

Jomaa, W., Songmene, V., & Bocher, P. (2017). Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals. Machining Science and Technology, 21(3), 335-361. Lien externe

Tu, F., Delbergue, D., Miao, H., Klotz, T., Brochu, M., Bocher, P., & Lévesque, M. (2017). A sequential DEM-FEM coupling method for shot peening simulation. Surface and Coatings Technology, 319, 200-212. Lien externe

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (septembre 2017). Study of short crack growth in shot peened 300M steel [Communication écrite]. 13th International Conference on Shot Peening, Montréal, Québec. Lien externe

Javadi, H., Jomaa, W., Texier, D., Brochu, M., & Bocher, P. (juillet 2016). Surface roughness effects on the fatigue behavior of as-machined inconel 718 [Communication écrite]. 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 2017), Brno, Czech republic. Lien externe

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (août 2016). Comparison of two X-ray residual stress measurement methods: sin2 ψ and cos α, through the determination of a martensitic steel X-ray elastic constant [Communication écrite]. 10th International Conference on Residual Stresses (ICRS10), Sydney, Australia (6 pages). Disponible

Bretin, R., Bocher, P., & Lévesque, M. (août 2016). Development of a cellular automaton for a better consideration of elastic neighborhood effect in polycrystals [Communication écrite]. 10th International Conference on Computational Methods (ICCM 2016), Berkeley, Calif.. Lien externe

Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., & Bocher, P. (2016). Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld. Metallography, Microstructure, and Analysis, 5(1), 50-61. Lien externe

Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (septembre 2016). Finite element analysis of serrated chip formation in machining of 7075-t651 aluminum alloy [Communication écrite]. International Mineral Processing Congress (IMPC 2016), Québec, Québec. Non disponible

Jomaa, W., Songmene, V., & Bocher, P. (2016). An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations. Journal of Materials Engineering and Performance, 25(3), 1010-1027. Lien externe

Jomaa, W., Songmene, V., & Bocher, P. (2016). An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel. Materials and Manufacturing Processes, 31(7), 838-844. Lien externe

Amrei, M. M., Monajati, H., Thibault, D., Verreman, Y., Germain, L., & Bocher, P. (2016). Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal. Materials Characterization, 111, 128-136. Lien externe

Paquin, M., Thibault, D., Bocher, P., Lévesque, J.-B., Verreman, Y., & Shinozaki, K. (2015). Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds. Welding in the World, 59(4), 521-532. Lien externe

Mokhtabad Amrei, M., Verreman, Y., Bridier, F., Thibault, D., & Bocher, P. (2015). Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints. Metallography, Microstructure, and Analysis, 4(3), 207-218. Lien externe

Jomaa, W., Daoud, M., Songmene, V., Bocher, P., & Châtelain, J.-F. (novembre 2014). Identification and Validation of Marusich's Constitutive Law for Finite Element Modeling of High Speed Machining [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec (6 pages). Lien externe

Lapalme, M., Hoseini, M., Bocher, P., Colle, A. R., & Lévesque, M. (2014). Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys. Experimental Mechanics, 54(5), 841-855. Lien externe

Jomaa, W., Songmene, V., & Bocher, P. (2014). Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials, 7(3), 1603-1624. Lien externe

Liste produite: Fri Nov 22 04:17:51 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Bocher, Philippe"

Aide