Monter d'un niveau |
Ce graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (septembre 2019). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Communication écrite]. 38th IAHR World Congress, Panama City, Panama. Lien externe
Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Two-phase damping and interface surface area in tubes with internal flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages). Lien externe
Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2024). Solid–fluid force modeling: insights from comparing a reduced order model for a pair of particles with resolved CFD-DEM. International Journal of Multiphase Flow, 178, 104882 (23 pages). Disponible
Barbeau, L., Golshan, S., Deng, J., Étienne, S., Béguin, C., & Blais, B. (2024). High-order moving immersed boundary and its application to a resolved CFD-DEM model. Computers & Fluids, 268, 106094 (14 pages). Lien externe
Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2022). Development of a high-order continuous Galerkin sharp-interface immersed boundary method and its application to incompressible flow problems. Computers & Fluids, 239, 13 pages. Lien externe
Bouvard, J., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). Characterization of bubble cloud quality and evolution using optical probes [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. Lien externe
Béguin, C., Étienne, S., & Pettigrew, M. J. (2017). Effect of dispersed phase fraction on the drag coefficient of a droplet or a bubble in an idealized two-phase flow. European Journal of Mechanics, B/Fluids, 65, 339-349. Lien externe
Béguin, C., Pelletier, É., & Étienne, S. (2016). Void fraction influence on added mass in a bubbly flow. European Journal of Mechanics - B/Fluids, 56, 28-45. Lien externe
Béguin, C., & Étienne, S. (juin 2015). Transverse and rotational galloping of square cylinders at low Reynolds numbers [Communication écrite]. 25th International Ocean and Polar Engineering Conference, Kona, Hawaii, USA. Non disponible
Béguin, C., Pelletier, É., & Étienne, S. (juillet 2014). Void fraction effect on added mass in bubbly flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Béguin, C., Plagnard, T., & Étienne, S. (juillet 2014). Wall proximity and curvature effect on added mass forces in two-phase cross-flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (8 pages). Lien externe
Béguin, C., Pelletier, E., & Étienne, S. (juin 2013). Added mass in a bubbly flow : void fraction and wall influence [Communication écrite]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec. Non disponible
Béguin, C., Étienne, S., Pettigrew, M. J., & Mureithi, N. W. (juillet 2012). A model for drag coefficient in an idealized bubbly two-phase flow [Communication écrite]. 10th International Conference on Flow-Induced Vibration (FIV 2012), Dublin, Ireland. Non disponible
Béguin, C. (2010). Modélisation des écoulements diphasiques : amortissement, forces interfaciales et turbulence diphasique. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Béguin, C., Wehbe, J., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2009). Influence of viscosity, density and surface tension on two-phase damping [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe
Béguin, C., Anscutter, F., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204. Lien externe
Béguin, C., Ross, A., Pettigrew, M. J., & Langre, E. (juin 2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe
Béguin, C., Pettigrew, M. J., & Mureithi, N. W. (novembre 2006). Flow Pattern Recognition and Dynamic Characteristics of Two-Phase Cross Flow in Steam Generator Tube Bundles [Communication écrite]. 5th CNS International Steam Generator Conference, Toronto, Ontario. Non disponible
Béguin, C. (2004). Optimisation du contrôle actif de la couche limite par aspiration sur un profil [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible
Charreton, C., Béguin, C., Yu, K. R., & Étienne, S. (2015). Effect of Reynolds number on the stability of a single flexible tube predicted by the quasi-steady model in tube bundles. Journal of Fluids and Structures, 56, 107-123. Lien externe
Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (2015). Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters. Journal of Fluids and Structures, 56, 56-74. Lien externe
Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (juillet 2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe
Charreton, C., Béguin, C., Yu, R., & Étienne, S. (juillet 2013). Stability Derivatives in a Parallel Triangular Tube Bundle Subject to Cross-Flow at Moderated Reynolds Number [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2013), Paris, France (10 pages). Lien externe
Clanet, C., Béguin, C., Richard, D., & Quéré, D. (2004). Maximal deformation of an impacting drop. Journal of Fluid Mechanics, 517, 199-208. Lien externe
Dhar, L., Anne, F., Recchia, G., Étienne, S., Béguin, C., Scott, D., & Bornard, L. (2021). Bubble characteristics from injected air sheet through slots in a water cross-flow. International Journal of Multiphase Flow, 142, 12 pages. Lien externe
De Kerret, F., Béguin, C., & Étienne, S. (2017). Two-phase flow pattern identification in a tube bundle based on void fraction and pressure measurements, with emphasis on churn flow. International Journal of Multiphase Flow, 94, 94-106. Lien externe
De Kerret, F., Benito, I., Béguin, C., Pelletier, D., & Étienne, S. (juillet 2016). Two-phase flow pattern recognition in a varying section based on void fraction and pressure measurements [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Disponible
Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (2020). Numerical study of the influence of weber and reynolds numbers on the development of kelvinhelmholtz instability. International Journal of Offshore and Polar Engineering, 30(2), 129-140. Lien externe
Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (juin 2018). Numerical study of the influence of weber and reynolds numbers on the development of Kelvin-Helmholtz instability [Communication écrite]. 28th International Ocean and Polar Engineering Conference (ISOPE 2018), Sapporo, Japan. Lien externe
Frigo, J. B., Béguin, C., Hay, A., Étienne, S., & Pelletier, D. (juin 2017). Spanwise force correlation of rotating square cylinders in three-dimensional cross-flow [Communication écrite]. 27th International Ocean and Polar Engineering Conference, San Francisco, California. Lien externe
Garapin, J., Béguin, C., Étienne, S., Pelletier, D., & Molin, B. (2018). Non linear model of rotational galloping of square, rectangular and bundle cylinder in cross-flow. [Modélisation non-linéaire du galop en rotation pour des cylindres de sections carrées et rectangulaires]. Houille Blanche-Revue Internationale de l'Eau, 104(1), 11-17. Lien externe
Horriche, Z., Étienne, S., Béguin, C., & Brosset, L. (juin 2023). Numerical Study of the Influence of Weber and Reynolds Numbers on Global Wave Shapes Before Impact [Communication écrite]. 33rd International Ocean and Polar Engineering Conference (ISOPE 2023), Ottawa, ON, Canada. Lien externe
Ledoux, T., Anne, F., Béguin, C., Gosselin, F., & Étienne, S. (juin 2023). An experimental study on vortex induced motion of a submerged cylindrical buoy with a short tether chain [Communication écrite]. ASME 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), Univ Melbourne, Melbourne, AUSTRALIA (10 pages). Lien externe
Pelletier, É., Béguin, C., & Étienne, S. (2015). Experiments of air bubbles impacting a rigid wall in tap water. Physics of Fluids, 27(12), 16 pages. Lien externe
Plagnard, T., Béguin, C., & Étienne, S. (juillet 2014). Predicting Fluidelastic Instability in Tube Array With Potential Theory [Communication écrite]. ASME Pressure Vessels and Piping (PVP 2014), Anaheim, California (11 pages). Lien externe
Pelletier, É., Béguin, C., & Étienne, S. (juillet 2014). Simple model for bubble-wall interaction [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (11 pages). Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. Lien externe
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). How a ball free to orbit in a circular track mitigates the galloping of a square prism. Nonlinear Dynamics, 111(1), 179-197. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). Multi-ball rotative nonlinear energy sink for galloping mitigation. Journal of Sound and Vibration, 526, 8 pages. Lien externe
Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2021). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink. Journal of Fluids and Structures, 100, 103169 (13 pages). Lien externe
Selwanis, M., Rishmawi, S., Franzini, G., Béguin, C., & Gosselin, F. (2020). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink [Ensemble de données]. Lien externe
Trochu, F., Yang, B., Wang, J., Béguin, C., & Causse, P. (juin 2022). Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juillet 2015). Fluidelastic instability in tube arrays subject to two-phase cross flow: A porous medium approach [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2015), Boston, MA, United states (10 pages). Lien externe
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part A: Porous medium approach [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, National Harbor, Maryland. Lien externe
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part B: Two-phase flow modeling [Communication écrite]. 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference 2014, AIAA AVIATION 2014, Atlanta, GA, United states. Lien externe
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). A porous medium approach to model Fluid-Structure Interactions in tube bundles [Communication écrite]. 22nd Annual Conference of the CFD Society of Canada, Toronto, Ontario. Non disponible
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). A Porous Medium Formulation for Fluid-Structure Interactions in a Tube Bundle Subject to Two-Phase Cross-Flow [Communication écrite]. AIAA Science and Technology Forum and Exposition 2014 (SCITECH 2014), National Harbor, MD. Non disponible
Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2013). Fluidelastic instability of tube array in two-phase cross-flow : a porous media approach [Communication écrite]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec. Non disponible
Vautrin, Y., Muller, E., Pelletier, D., Étienne, S., & Béguin, C. (janvier 2020). Automatic adaptive remeshing for unsteady interfacial flows with surface tension [Communication écrite]. AIAA Scitech Forum, Orlando, FL, USA. Lien externe
Yang, B., Wang, J., Causse, P., Béguin, C., & Trochu, F. (juillet 2023). On the Meso-structure Spatial Variability Characterizing and Geometric Modelling of Textile-Based Composite via Volume Imaging [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Non disponible
Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages). Lien externe
Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. Lien externe
Zoghlami, S., Béguin, C., Teyssedou, A., Scott, D., Bornard, L., & Étienne, S. (2021). Bubble cloud configuration effect on the added mass. Physics of Fluids, 33(5), 14 pages. Lien externe
Zoghlami, S., Béguin, C., Étienne, S., Teyssedou, A., Scott, D., & Bornard, L. (septembre 2019). Small bubble cloud configuration effect on added mass for euler-euler modeling [Communication écrite]. 38th IAHR World Congress, Panama City, Panama. Lien externe
Zoghlami, S., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). The role of added mass in the dispersion of bubble clouds [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. Lien externe
Zoghlami, S., Béguin, C., & Étienne, S. (juillet 2014). Development of a numerical model for quasi-periodic forces of two-phase cross flow in tube bundles [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (9 pages). Lien externe