Documents dont l'auteur est "Béguin, Cédric"

Monter d'un niveau

Cédric BéguinDépartement de génie mécanique

Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Nombre de documents: 59

Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2024). Solid–fluid force modeling: insights from comparing a reduced order model for a pair of particles with resolved CFD-DEM. International Journal of Multiphase Flow, 178, 104882 (23 pages). Disponible

Barbeau, L., Golshan, S., Deng, J., Étienne, S., Béguin, C., & Blais, B. (2024). High-order moving immersed boundary and its application to a resolved CFD-DEM model. Computers & Fluids, 268, 106094 (14 pages). Lien externe

Ledoux, T., Anne, F., Béguin, C., Gosselin, F., & Étienne, S. (juin 2023). An experimental study on vortex induced motion of a submerged cylindrical buoy with a short tether chain [Communication écrite]. ASME 42nd International Conference on Ocean, Offshore and Arctic Engineering (OMAE 2023), Univ Melbourne, Melbourne, AUSTRALIA (10 pages). Lien externe

Horriche, Z., Étienne, S., Béguin, C., & Brosset, L. (juin 2023). Numerical Study of the Influence of Weber and Reynolds Numbers on Global Wave Shapes Before Impact [Communication écrite]. 33rd International Ocean and Polar Engineering Conference (ISOPE 2023), Ottawa, ON, Canada. Lien externe

Yang, B., Wang, J., Causse, P., Béguin, C., & Trochu, F. (juillet 2023). On the Meso-structure Spatial Variability Characterizing and Geometric Modelling of Textile-Based Composite via Volume Imaging [Communication écrite]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Non disponible

Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages). Lien externe

Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. Lien externe

Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. Lien externe

Trochu, F., Yang, B., Wang, J., Béguin, C., & Causse, P. (juin 2022). Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe

Barbeau, L., Étienne, S., Béguin, C., & Blais, B. (2022). Development of a high-order continuous Galerkin sharp-interface immersed boundary method and its application to incompressible flow problems. Computers & Fluids, 239, 13 pages. Lien externe

Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. Lien externe

Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). How a ball free to orbit in a circular track mitigates the galloping of a square prism. Nonlinear Dynamics, 111(1), 179-197. Lien externe

Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2022). Multi-ball rotative nonlinear energy sink for galloping mitigation. Journal of Sound and Vibration, 526, 8 pages. Lien externe

Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. Lien externe

Dhar, L., Anne, F., Recchia, G., Étienne, S., Béguin, C., Scott, D., & Bornard, L. (2021). Bubble characteristics from injected air sheet through slots in a water cross-flow. International Journal of Multiphase Flow, 142, 12 pages. Lien externe

Zoghlami, S., Béguin, C., Teyssedou, A., Scott, D., Bornard, L., & Étienne, S. (2021). Bubble cloud configuration effect on the added mass. Physics of Fluids, 33(5), 14 pages. Lien externe

Selwanis, M. M., Franzini, G. R., Béguin, C., & Gosselin, F. (2021). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink. Journal of Fluids and Structures, 100, 103169 (13 pages). Lien externe

Vautrin, Y., Muller, E., Pelletier, D., Étienne, S., & Béguin, C. (janvier 2020). Automatic adaptive remeshing for unsteady interfacial flows with surface tension [Communication écrite]. AIAA Scitech Forum, Orlando, FL, USA. Lien externe

Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (2020). Numerical study of the influence of weber and reynolds numbers on the development of kelvinhelmholtz instability. International Journal of Offshore and Polar Engineering, 30(2), 129-140. Lien externe

Selwanis, M., Rishmawi, S., Franzini, G., Béguin, C., & Gosselin, F. (2020). Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink [Ensemble de données]. Lien externe

Zoghlami, S., Béguin, C., Étienne, S., Teyssedou, A., Scott, D., & Bornard, L. (septembre 2019). Small bubble cloud configuration effect on added mass for euler-euler modeling [Communication écrite]. 38th IAHR World Congress, Panama City, Panama. Lien externe

Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (septembre 2019). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Communication écrite]. 38th IAHR World Congress, Panama City, Panama. Lien externe

Bouvard, J., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). Characterization of bubble cloud quality and evolution using optical probes [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. Lien externe

Garapin, J., Béguin, C., Étienne, S., Pelletier, D., & Molin, B. (2018). Non linear model of rotational galloping of square, rectangular and bundle cylinder in cross-flow. [Modélisation non-linéaire du galop en rotation pour des cylindres de sections carrées et rectangulaires]. Houille Blanche-Revue Internationale de l'Eau, 104(1), 11-17. Lien externe

Fortin, S., Étienne, S., Béguin, C., Pelletier, D., & Brosset, L. (juin 2018). Numerical study of the influence of weber and reynolds numbers on the development of Kelvin-Helmholtz instability [Communication écrite]. 28th International Ocean and Polar Engineering Conference (ISOPE 2018), Sapporo, Japan. Lien externe

Zoghlami, S., Béguin, C., Étienne, S., Scott, D., & Bornard, L. (septembre 2018). The role of added mass in the dispersion of bubble clouds [Communication écrite]. 29th IAHR Symposium on Hydraulics Machinery and Systems (HMS 2018), Kyoto, Japan. Lien externe

Béguin, C., Étienne, S., & Pettigrew, M. J. (2017). Effect of dispersed phase fraction on the drag coefficient of a droplet or a bubble in an idealized two-phase flow. European Journal of Mechanics, B/Fluids, 65, 339-349. Lien externe

Frigo, J. B., Béguin, C., Hay, A., Étienne, S., & Pelletier, D. (juin 2017). Spanwise force correlation of rotating square cylinders in three-dimensional cross-flow [Communication écrite]. 27th International Ocean and Polar Engineering Conference, San Francisco, California. Lien externe

De Kerret, F., Béguin, C., & Étienne, S. (2017). Two-phase flow pattern identification in a tube bundle based on void fraction and pressure measurements, with emphasis on churn flow. International Journal of Multiphase Flow, 94, 94-106. Lien externe

De Kerret, F., Benito, I., Béguin, C., Pelletier, D., & Étienne, S. (juillet 2016). Two-phase flow pattern recognition in a varying section based on void fraction and pressure measurements [Communication écrite]. 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016), Grenoble, France (10 pages). Disponible

Béguin, C., Pelletier, É., & Étienne, S. (2016). Void fraction influence on added mass in a bubbly flow. European Journal of Mechanics - B/Fluids, 56, 28-45. Lien externe

Charreton, C., Béguin, C., Yu, K. R., & Étienne, S. (2015). Effect of Reynolds number on the stability of a single flexible tube predicted by the quasi-steady model in tube bundles. Journal of Fluids and Structures, 56, 107-123. Lien externe

Pelletier, É., Béguin, C., & Étienne, S. (2015). Experiments of air bubbles impacting a rigid wall in tap water. Physics of Fluids, 27(12), 16 pages. Lien externe

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juillet 2015). Fluidelastic instability in tube arrays subject to two-phase cross flow: A porous medium approach [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2015), Boston, MA, United states (10 pages). Lien externe

Béguin, C., & Étienne, S. (juin 2015). Transverse and rotational galloping of square cylinders at low Reynolds numbers [Communication écrite]. 25th International Ocean and Polar Engineering Conference, Kona, Hawaii, USA. Non disponible

Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (2015). Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters. Journal of Fluids and Structures, 56, 56-74. Lien externe

Zoghlami, S., Béguin, C., & Étienne, S. (juillet 2014). Development of a numerical model for quasi-periodic forces of two-phase cross flow in tube bundles [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (9 pages). Lien externe

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part A: Porous medium approach [Communication écrite]. 52nd AIAA Aerospace Sciences Meeting - AIAA Science and Technology Forum and Exposition, SciTech 2014, National Harbor, Maryland. Lien externe

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). Fluid-structure interactions in a tube bundle subject to cross-flow. Part B: Two-phase flow modeling [Communication écrite]. 11th AIAA/ASME Joint Thermophysics and Heat Transfer Conference 2014, AIAA AVIATION 2014, Atlanta, GA, United states. Lien externe

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2014). A porous medium approach to model Fluid-Structure Interactions in tube bundles [Communication écrite]. 22nd Annual Conference of the CFD Society of Canada, Toronto, Ontario. Non disponible

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (janvier 2014). A Porous Medium Formulation for Fluid-Structure Interactions in a Tube Bundle Subject to Two-Phase Cross-Flow [Communication écrite]. AIAA Science and Technology Forum and Exposition 2014 (SCITECH 2014), National Harbor, MD. Non disponible

Plagnard, T., Béguin, C., & Étienne, S. (juillet 2014). Predicting Fluidelastic Instability in Tube Array With Potential Theory [Communication écrite]. ASME Pressure Vessels and Piping (PVP 2014), Anaheim, California (11 pages). Lien externe

Pelletier, É., Béguin, C., & Étienne, S. (juillet 2014). Simple model for bubble-wall interaction [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (11 pages). Lien externe

Charreton, C., Béguin, C., Ross, A., Étienne, S., & Pettigrew, M. J. (juillet 2014). Two-phase damping in vertical pipe flows: Effect of void fraction, flow rate and external excitation [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe

Béguin, C., Pelletier, É., & Étienne, S. (juillet 2014). Void fraction effect on added mass in bubbly flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states. Lien externe

Béguin, C., Plagnard, T., & Étienne, S. (juillet 2014). Wall proximity and curvature effect on added mass forces in two-phase cross-flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2014), Anaheim, CA, United states (8 pages). Lien externe

Béguin, C., Pelletier, E., & Étienne, S. (juin 2013). Added mass in a bubbly flow : void fraction and wall influence [Communication écrite]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec. Non disponible

Tixier, E., Béguin, C., Étienne, S., Pelletier, D., Hay, A., & Ricciardi, G. (juin 2013). Fluidelastic instability of tube array in two-phase cross-flow : a porous media approach [Communication écrite]. Annual Meeting of the Canadian Applied and Industrial Mathematics Society (CAIMS), Québec, Québec. Non disponible

Charreton, C., Béguin, C., Yu, R., & Étienne, S. (juillet 2013). Stability Derivatives in a Parallel Triangular Tube Bundle Subject to Cross-Flow at Moderated Reynolds Number [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2013), Paris, France (10 pages). Lien externe

Béguin, C., Étienne, S., Pettigrew, M. J., & Mureithi, N. W. (juillet 2012). A model for drag coefficient in an idealized bubbly two-phase flow [Communication écrite]. 10th International Conference on Flow-Induced Vibration (FIV 2012), Dublin, Ireland. Non disponible

Béguin, C. (2010). Modélisation des écoulements diphasiques : amortissement, forces interfaciales et turbulence diphasique. [Thèse de doctorat, École Polytechnique de Montréal]. Disponible

Béguin, C., Wehbe, J., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2009). Influence of viscosity, density and surface tension on two-phase damping [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2009), Prague, Czech republic. Lien externe

Béguin, C., Anscutter, F., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (2009). Two-phase damping and interface surface area in tubes with vertical internal flow. Journal of Fluids and Structures, 25(1), 178-204. Lien externe

Béguin, C., Ross, A., Pettigrew, M. J., & Langre, E. (juin 2008). Effect of fluid density on two-phase damping for piping subjected to internal bubbly flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe

Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juin 2008). Relationship between vibration behaviour and two-phase flow regime transitions for piping with internal flow [Communication écrite]. 9th International Conference on Flow-Induced Vibration (FIV 2008), Prague, Czech Republic. Lien externe

Béguin, C., Pettigrew, M. J., & Mureithi, N. W. (novembre 2006). Flow Pattern Recognition and Dynamic Characteristics of Two-Phase Cross Flow in Steam Generator Tube Bundles [Communication écrite]. 5th CNS International Steam Generator Conference, Toronto, Ontario. Non disponible

Anscutter, F., Béguin, C., Ross, A., Pettigrew, M. J., & Mureithi, N. W. (juillet 2006). Two-phase damping and interface surface area in tubes with internal flow [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2006) and ICPVT-11 Conference, Vancouver, BC, Canada (11 pages). Lien externe

Clanet, C., Béguin, C., Richard, D., & Quéré, D. (2004). Maximal deformation of an impacting drop. Journal of Fluid Mechanics, 517, 199-208. Lien externe

Béguin, C. (2004). Optimisation du contrôle actif de la couche limite par aspiration sur un profil [Mémoire de maîtrise, École Polytechnique de Montréal]. Disponible

Liste produite: Tue Nov 19 04:28:23 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Béguin, Cédric"

Aide