Documents dont le département est "Département de génie mécanique"

B

Bailon, J.-P., Dickson, J. I., & Shiqiong, L. (avril 1988). Relationship Between Fractographic Features and Fatigue Propagation Mechanisms at or Near the Threshold [Communication écrite]. International Colloquium "Basic Mechanisms in Fatigue of Metals", Brno, Czechoslovakia. Non disponible

Ben Souda, K., Akyel, C., & Bilgen, E. (1988). Étude théorique et expérimentale de la lyophilisation du lait à l'aide des micro-ondes. (Rapport technique n° EPM-RT-88-34). Accès restreint

D

Dansereau, J., & Stokes, I. A.F. (1988). Measurements of the three-dimensional shape of the rib cage. Journal of Biomechanics, 21(11), 893-901. Lien externe

Dickson, J. I., Handfield, L., Lalonde, S., Sahoo, M., & Bailon, J.-P. (1988). Corrosion-fatigue crack propagation behavior of Mn-Ni-Al bronze propeller alloys. Journal of Materials Engineering, 10(1), 45-56. Lien externe

H

Hasnaoui, M. (1988). Convection naturelle dans une cavité à parois conductrices et rayonnantes. (Rapport technique n° EPM-RT-88-17). Accès restreint

Hemami, A., & Labonville, R. (1988). Kinematic equations and solutions of a human-arm-like robot manipulator. Robotics and Autonomous Systems, 4(1), 65-72. Lien externe

L

Lakis, A. A., & Laveau, A. (1988). Non-linear dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. (Rapport technique n° EPM-RT-88-13). Disponible

Lakis, A. A., & Nguyen, D. T. (1988). Liquid phase velocity of turbulent dispersed bubbles flow in large diameter horizontal pipes. (Rapport technique n° EPM-RT-88-24). Disponible

Lakis, A. A., & Nguyen, D. T. (1988). Void fraction in highly turbulent and large diameter horizontal pipe flow. (Rapport technique n° EPM-RT-88-28). Disponible

Lakis, A. A., & Nguyen, Q. T. (1988). Dynamic analysis of spherical shells : a hybrid method. (Rapport technique n° EPM-RT-88-23). Disponible

Lakis, A. A., & Van Dyke, P. (1988). Dynamic analysis of anisotropic cylindrical shells containing a flowing fluid. (Rapport technique n° EPM-RT-88-12). Non disponible

Lakis, A. A., & Van Dyke, P. (1988). Dynamic Analysis of conical shells containing flowing fluid. (Rapport technique n° EPM-RT-88-12). Disponible

M

Marchand, N. J., Bailon, J.-P., & Dickson, J. I. (1988). Near- threshold fatigue crack growth in copper and alpha- brass: Grain- size and environmental effects. Metallurgical Transactions A, 19(10), 2575-2587. Lien externe

O

Ozell, B., & Camarero, R. (juin 1988). From Inlet to Outlet: The Complete Hydraulic Design of Turbomachine [Communication écrite]. 14th Symposium: Progress Within Large and High-Specific Energy Units, Trondheim, Norway. Non disponible

Ozell, B., & Camarero, R. (juillet 1988). Hydraulic Design of Turbomachines [Communication écrite]. International Conference and Trade Show (Small Hydro '88), Toronto, Ont.. Non disponible

P

Panigrahy, S. C., & Rigaud, M. (1988). Effect of particle size distribution of specularite concentrates on sinter quality and its influence on the formation of calcium ferrites during sintering. Steel Research, 59(4), 153-160. Lien externe

Paraschivoiu, I., & Allet, A. (1988). Aerodynamic analysis of the Darrieus wind turbines including dynamic-stall effects. Journal of Propulsion and Power, 4(5), 472-477. Lien externe

Perrault, M., Allard, G., Gou, M., & Guernier, C. (janvier 1988). An Alternative to the Conventional Natural Gas Conversion Kit for Vehicles: Computer Controlled Upstream Injection [Communication écrite]. SAE International Fall Fuels and Lubricants Meeting and Exhibition, 1988. Lien externe

R

Rousselet, J., & Dupuis, C. (1988). On the equations of curved pipes conveying fluid. (Rapport technique n° EPM-RT-88-30). Accès restreint

S

Schetz, J. A., Pelletier, D., & Mallory, D. A. (1988). Experimental and numerical investigation of a propeller with three-dimensional inflow. Journal of Propulsion and Power, 4(4), 341-349. Lien externe