![]() | Monter d'un niveau |
Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. Lien externe
Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645. Lien externe
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 107742 (10 pages). Lien externe
Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). A comparative study on the performance of nickel-based technologies for lightning strike protection of composite aircraft [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). Silver-based conductive materials for lightning strike protection of aircraft composite structures [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Lien externe
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Chauvette, J.-F., Hia, I. L., Farahani, R. D., & Therriault, D. (2022). Objective 4: Develop a printing process for direct deposition of acoustic abradable materials on composite structures featuring flat and curved geometries. (Rapport technique). Non disponible
Costa-Baptista, J., Fotsing, E. R., Mardjano, J., Therriault, D., & Ross, A. (juillet 2022). Multilayered microchannels for high absorption at different frequency ranges [Communication écrite]. 28th International Congress on Sound and Vibration (ICSV 2022). Non disponible
Costa-Baptista, J., Fotsing, E.-R., Mardjono, J., Therriault, D., & Ross, A. (2022). Design and fused filament fabrication of multilayered microchannels for subwavelength and broadband sound absorption. Additive Manufacturing, 55, 102777 (17 pages). Lien externe
Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445. Disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Gosselin, F., Zou, S., & Therriault, D. (juillet 2022). Bioinspired transparent impact-absorbing composite made with a fluid mechanical instability [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Non disponible
Langot, J., Gourcerol, E., Serbescu, A., Brassard, D., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). A comparative study on the performance of nickel-based technologies for lightning strike protection of composite aircraft [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Le Gentil, T., Therriault, D., & Kerbrat, O. (juin 2022). Energy efficiency-oriented decision-making for additive manufacturing with carbon-fibre-reinforced polyamide 12 [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Lennox, M. D., Hosseini Rad, S., Therriault, D., Favis, B. D., & Tavares, J. R. (2022). Submicron Poly(vinyl acetate) Emulsion Preparation via Ultrasonication: Progress toward Oil-in-Water Binder-Jet Printing Binders. Industrial & Engineering Chemistry Research, 61(35), 13294-13297. Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages). Lien externe
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). Supplementary material for 'In-situ full-field measurements for 3D printed polymers during mode I interface failure' [Ensemble de données]. Lien externe
Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (juin 2022). In-situ full-field measurements for 3D printed composites under interlayer delamination [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (juillet 2022). Additively manufactured thermally bistable structures [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022). Tunable thermally bistable multi-material structure. Applied Materials Today, 28, 101529 (14 pages). Lien externe
Pierre, J., Chenier, G., Farahani, R. D., & Therriault, D. (2022). Objective 3: Additive manufacturing of acoustic sandwich panels using the materials developed in O1. (Rapport technique). Non disponible
Rafiee, M., Granier, F., Tao, R., Bherer-Constant, A., Chenier, G., & Therriault, D. (2022). Multi-Material, Multi-Process, Planar, and Nonplanar Additive Manufacturing of Piezoelectric Devices. Advanced Engineering Materials, 24(10), 9 pages. Lien externe
Schlachter, D. A., Lennox, M. D., Favis, B. D., Therriault, D., & Tavares, J. R. (2022). Physicochemical Limitations of Capillary Models Applied to High- Concentration Polymer Solutions. ACS Omega, 7(7), 5636-5645. Lien externe
Serbescu, A., Brassard, D., Langot, J., Gourcerol, E., Chizari, K., Lapalme, M., Desautels, A., Sirois, F., & Therriault, D. (octobre 2022). Silver-based conductive materials for lightning strike protection of aircraft composite structures [Communication écrite]. 36th International Conference on Lightning Protection (ICLP 2022), Cape Town, South Africa. Lien externe
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Disponible
Tao, R., Granier, F., & Therriault, D. (2022). Multi-material freeform 3D printing of flexible piezoelectric composite sensors using a supporting fluid. Additive Manufacturing, 60, 103243 (11 pages). Lien externe
Tao, R., Shi, J., Granier, F., Moeini, M., Akbarzadeh, A., & Therriault, D. (2022). Multi-material fused filament fabrication of flexible 3D piezoelectric nanocomposite lattices for pressure sensing and energy harvesting applications. Applied Materials Today, 29, 10 pages. Lien externe
Tao, R., Shi, J., Rafiee, M., Akbarzadeh, A., & Therriault, D. (2022). Fused filament fabrication of PVDF films for piezoelectric sensing and energy harvesting applications. Materials Advances, 3(12), 4851-4860. Disponible
Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible
Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Zhang, C., Wang, C.-S., Therriault, D., & Heuzey, M.-C. (2022). Development of aqueous protein/polysaccharide mixture-based inks for 3D printing towards food applications. Food Hydrocolloids, 131, 107742 (10 pages). Lien externe