Documents publiés en "2019"

B

Bag, A., Delbergue, D., Bocher, P., Lévesque, M., & Brochu, M. (2019). Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel. International Journal of Fatigue, 118, 126-138. Lien externe

Bag, A., Lévesque, M., & Brochu, M. (2019). Effect of shot peening on short crack propagation in 300M steel. International Journal of Fatigue, 131, 105346 (9 pages). Lien externe

Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 - Finite element study of the interaction between grains. International Journal of Solids and Structures, 176-177, 36-48. Lien externe

Bretin, R., Lévesque, M., & Bocher, P. (2019). Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 - Cellular Automaton. International Journal of Solids and Structures, 176-177, 49-67. Lien externe

Breumier, S., Sao-Joao, S., Villani, A., Baltazar, J., Lévesque, M., & Kermouche, G. (septembre 2019). Nanomechanical testing for crystal plasticity constitutive framework identification at high strain rates [Communication écrite]. VII Nanomechanical Testing in Materials Research and Development, Melia Costa Del Sol, Malaga, Spain. Non disponible

Breumier, S., Villani, A., Maurice, C., Lévesque, M., & Kermouche, G. (2019). Effect of crystal orientation on indentation-induced residual stress field: Simulation and experimental validation. Materials & Design, 169. Disponible

C

Canals, L., Badreddine, J., McGillivray, B., Miao, H. Y., & Lévesque, M. (2019). Effect of vibratory peening on the sub-surface layer of aerospace materials Ti-6Al-4V and E-16NiCrMo13. Journal of Materials Processing Technology, 264, 91-106. Lien externe

Courtois, A., Marcin, L., Benavente, M., Ruiz, E., & Lévesque, M. (2019). Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites. International Journal of Solids and Structures, 163, 61-74. Lien externe

D

Delbergue, D., Texier, D., Lévesque, M., & Bocher, P. (2019). Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin²ψ and cosα methods. Journal of Applied Crystallography, 52(4), 828-843. Lien externe

Diehl, P., Prudhomme, S., & Lévesque, M. (2019). A Review of Benchmark Experiments for the Validation of Peridynamics Models. Journal of Peridynamics and Nonlocal Modeling, 1(1), 14-35. Lien externe

H

Himmiche, S., Trofimov, A., Eren, Z., Farahani, R. D., Lévesque, M., & Therriault, D. (2019). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

K

Klotz, T., Lévesque, M., & Brochu, M. (2019). Effects of rolled edges on the fatigue life of shot peened Inconel 718. Journal of Materials Processing Technology, 263, 276-284. Lien externe

L

Lingua, A., Sosa Rey, F., Lévesque, M., & Therriault, D. (2019). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

T

Tabiai, I., Texier, D., Bocher, P., Therriault, D., & Lévesque, M. (2019). In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load. Experimental Mechanics, 60(3), 359-377. Lien externe

Tabiai, I., Tkachev, G., Diehl, P., Frey, S., Ertl, T., Therriault, D., & Lévesque, M. (2019). Hybrid image processing approach for autonomous crack area detection and tracking using local digital image correlation results applied to single-fiber interfacial debonding. Engineering Fracture Mechanics, 216, 17 pages. Lien externe