<  Retour au portail Polytechnique Montréal

Documents publiés en "2015"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Département | Sous-type de document | Aucun groupement
Aller à : A | F | K | M | N | P | S | T | V | W
Nombre de documents: 22

A

Abdali, H., & Ajji, A. (2015). Development of antibacterial structures and films using clove bud powder. Industrial Crops and Products, 72, 214-219. Lien externe

Audet, E., Mighri, F., Rodrigue, D., & Ajji, A. (2015). Effect of Biaxial Stretching Temperature and Gas Diffusion Expansion on Cellular Morphology of PP/CaCO₃ and PP/talc Cellular Films. Cellular Polymers, 34(5), 233-248. Lien externe

F

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Effect of Uniaxial Stretching on Thermal, Oxygen Barrier, and Mechanical Properties of Polyamide 6 and Poly(m-xylene adipamide) Nanocomposite Films. Polymer Engineering and Science, 55(5), 1113-1127. Lien externe

Fereydoon, M., Tabatabaei, S. H., & Ajji, A. (2015). Properties of co-extruded nanoclay-filled aliphatic nylon (PA6)/linear low-density polyethylene and aromatic nylon (MXD6)/linear low-density polyethylene multilayer films. Journal of Plastic Film & Sheeting, 31(1), 45-77. Lien externe

K

Kolahchi, A. R., Ajji, A., & Carreau, P. (2015). Enhancing Hydrophilicity of Polyethylene Terephthalate Surface Through Melt Blending. Polymer Engineering and Science, 55(2), 349-358. Lien externe

Kolahchi, A. R., Ajji, A., & Carreau, P. (juin 2014). Improvement of PET surface hydrophilicity and roughness through blending [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe

M

Matet, M., Heuzey, M.-C., Ajji, A., & Sarazin, P. (2015). Plasticized chitosan/polyolefin films produced by extrusion. Carbohydrate Polymers, 117, 177-184. Lien externe

Mighri, N., Mao, J., Mighri, F., Ajji, A., & Rouabhia, M. (2015). Chitosan-Coated Collagen Membranes Promote Chondrocyte Adhesion, Growth, and Interleukin-6 Secretion. Materials, 8(11), 7673-7689. Disponible

Moayeri, A., & Ajji, A. (2015). Fabrication of polyaniline/poly(ethylene oxide)/non-covalently functionalized graphene nanofibers via electrospinning. Synthetic Metals, 200, 7-15. Lien externe

Mohammdi, S. R., Ajji, A., & Tabatabaei, S. H. (juin 2014). Peel/seal properties of poly(ethylene methyl acrylate)/polybutene-1 blend films [Communication écrite]. 30th International Conference of the Polymer Processing Society (PPS-30), Cleveland, Ohio, USA (4 pages). Lien externe

Mohebbi, A., Mighri, F., Ajji, A., & Rodrigue, D. (2015). Current issues and challenges in polypropylene foaming: A review. Cellular Polymers, 34(6), 299-337. Lien externe

N

Najarzadeh, Z., Ajji, A., & Bruchet, J. B. (2015). Interfacial self-adhesion of polyethylene blends: the role of long chain branching and extensional rheology. Rheologica Acta, 54(5), 377-389. Lien externe

P

Patel, J. D., Mighri, F., Ajji, A., & Chaudhuri, T. K. (2015). Development of CdS nanostructures by thermal decomposition of aminocaproic acid-mixed Cd-thiourea complex precursor: Structural, optical and photocatalytic characterization. Journal of Nanoscience and Nanotechnology, 15(4), 2733-2741. Lien externe

S

Saffar, A., Tabatabaei, S. H., Carreau, P., Ajji, A., & Kamal, M. R. (2015). Rheology of PP/PP-g-MA and PP/PP-g-AA Blends and Incidence on Orientation and Crystalline Structure of Their Cast Films. Industrial & Engineering Chemistry Research, 54(43), 10787-10795. Lien externe

Savoji, H., Lerouge, S., Ajji, A., & Wertheimer, M. R. (2015). Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds. Plasma Processes and Polymers, 12(4), 314-327. Lien externe

Savoji, H., Maire, M., Hadjizadeh, A., Ajji, A., Lerouge, S., & Wertheimer, M. R. (avril 2015). 3D Electrospun Scaffolds for Vascular Graft Applications: Fine Tuning of Properties by Plasma-Assisted Etching and Coating [Communication écrite]. 58th Annual Technical Conference, Santa Clara, CA USA. Lien externe

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Effect of dry grinding on chemically modified kaolin. Applied Clay Science, 105-106, 100-106. Lien externe

Shahverdi-Shahraki, K., Ghosh, T., Mahajan, K., Ajji, A., & Carreau, P. (2015). Polyethylene terephthalate/calcined kaolin composites: Effect of uniaxial stretching on the properties. Polymer Engineering and Science, 55(8), 1767-1775. Lien externe

T

Tabasi, R. Y., & Ajji, A. (2015). Selective degradation of biodegradable blends in simulated laboratory composting. Polymer Degradation and Stability, 120, 435-442. Lien externe

Tabasi, R. Y., Najarzadeh, Z., & Ajji, A. (2015). Development of high performance sealable films based on biodegradable/compostable blends. Industrial Crops and Products, 72, 206-213. Lien externe

V

Vu, T. T. D., Patel, J., Mighri, F., Do, T.-O., & Ajji, A. (2015). The effect of TiO₂ surface modification on the photovoltaic properties of hybrid bulk heterojunction solar cells based on MEH-PPV/CdS/TiO₂ active layer. Green Processing and Synthesis, 4(2), 79-90. Disponible

W

Wang, S., Saffar, A., Ajji, A., Wu, H., & Guo, S.-Y. (2015). Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing. Chinese Journal of Polymer Science, 33(7), 1028-1037. Lien externe

Liste produite: Fri Dec 20 02:36:17 2024 EST.