 | Monter d'un niveau |
Abbad, A., Lassoued, M.-A. B., Michon, G., & Ross, A. (juillet 2019). On the use of 3D printed architected core in sandwich structure for vibration control [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Abdali, H., Heli, B., & Ajji, A. (2019). Cellulose nanopaper cross-linked amino graphene/polyaniline sensors to detect CO₂ gas at room temperature. Sensors, 19(23), 10 pages. Lien externe
Abdali, H., Heli, B., & Ajji, A. (2019). Stable and sensitive amino-functionalized graphene/polyaniline nanofiber composites for room-temperature carbon dioxide sensing. RSC Advances, 9(70), 41240-41247. Lien externe
Alsinani, N., & Laberge Lebel, L. (septembre 2019). Thermoplastic pultrusion's cooling temperature effects on pulling forces and deconsolidation [Communication écrite]. 19th Annual SPE Automotive Composites Conference & Exhibition (ACCE 2019), Novi, Michigan (10 pages). Non disponible
Aujogue, N., & Ross, A. (juillet 2019). Transient force analysis technique to identify time-varying loads and defects on plates [Communication écrite]. 26th International Congress on Sound and Vibration (ICSV 2019), Montréal, Qc, Canada. Non disponible
Bagheriasl, D., Safdari, F., Carreau, P., Dubois, C., & Riedl, B. (2019). Development of cellulose nanocrystal-reinforced polylactide: A comparative study on different preparation methods. Polymer Composites, 40(S1), E342-E349. Lien externe
Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films. RSC Advances, 9(3), 1632-1641. Disponible
Ben Dhieb, F., Jalali Dil, E., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Erratum: Effect of nanoclay orientation on oxygen barrier properties of LbL nanocomposite coated films (vol 9, pg 1632, 2019). RSC Advances, 9(39), 22676-22676. Lien externe
Ben Dhieb, F., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Comparison of Crosslinking Efficiency in Dip and Roll-Deposited Coatings on Their Oxygen Barrier. ACS Omega, 4(14), 15772-15779. Lien externe
Bouchet, M., Gauthier, M., Maire, M., Ajji, A., & Lerouge, S. (2019). Towards compliant small-diameter vascular grafts: Predictive analytical model and experiments. Materials Science and Engineering: C, 100, 715-723. Lien externe
Bourg, V., Ienny, P., Caro-Bretelle, A. S., Le Moigne, N., Guillard, V., & Bergeret, A. (2019). Modeling of internal residual stress in linear and branched polyethylene films during cast film extrusion: Towards a prediction of heat-shrinkability. Journal of Materials Processing Technology, 271, 599-608. Lien externe
Brassard, D., Dubé, M., & Tavares, J. R. (2019). Resistance welding of thermoplastic composites with a nanocomposite heating element. Composites Part B: Engineering, 165, 779-784. Disponible
Bruel, C., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2019). The structural amphiphilicity of cellulose nanocrystals characterized from their cohesion parameters. Carbohydrate Polymers, 205, 184-191. Disponible
Dhieb, F. B., García, A. C., Tabatabaei, S. H., Mighri, F., & Ajji, A. (2019). Study of the Crosslinking of PVA with Glyoxal in LbL Nanocomposites. Open Journal of Polymer Chemistry, 09(04), 100-116. Lien externe
Di Mauro, E., Camaggi, M., Vandooren, N., Bayard, C., De Angelis, J., Pezzella, A., Baloukas, B., Silverwood, R., Ajji, A., Pellerin, C., & Santato, C. (2019). Eumelanin for nature-inspired UV-absorption enhancement of plastics. Polymer International, 68(5), 984-991. Lien externe
Esmizadeh, E., Arjmandpour, M., Vahidifar, A., Naderi, G., & Dubois, C. (2019). Preparation and characterization of silicone rubber/graphene nanosheets nanocomposites by in-situ loading of the coupling agent. Journal of Composite Materials, 53(24), 3459-3468. Lien externe
Esmizadeh, E., Khalili, S., Vahidifar, A., Naderi, G., & Dubois, C. (2019). Waste Polymethyl Methacrylate (PMMA): Recycling and high-yield monomer recovery. Dans Handbook of Ecomaterials (2977-3009). Lien externe
Esmizadeh, E., Sadeghi, T., Vahidifar, A., Naderi, G., Ghoreishy, M. H. R., & Paran, S. M. R. (2019). Nano Graphene-Reinforced Bio-nanocomposites Based on NR/PLA: The Morphological, Thermal and Rheological Perspective. Journal of Polymers and the Environment, 27(7), 1529-1541. Lien externe
Fenni, S. E., Wang, J., Haddaoui, N., Favis, B. D., Muller, A. J., & Cavallo, D. (2019). Crystallization and self-nucleation of PLA, PBS and PCL in their immiscible binary and ternary blends. Thermochimica Acta, 677, 117-130. Lien externe
Gallah, H., Mighri, F., Ajji, A., & Bandyopadhyay, J. (mai 2019). Flexible Electrospun PET/TiO₂ Nanofibrous Structures for Dye-Sensitized Solar Cell (DSSC) Photoanodes [Communication écrite]. 35th International Conference of the Polymer-Processing-Society (PPS 2019), Turkey. Lien externe
Gancheva, T., & Virgilio, N. (2019). Tailored macroporous hydrogel-nanoparticle nanocomposites for monolithic flow-through catalytic reactors. Reaction Chemistry & Engineering, 4(5), 806-811. Lien externe
Jahan, N., Mighri, F., Rodrigue, D., & Ajji, A. (2019). Effect of the inflation strategy on the piezoelectric response of cellular poly(vinylidene fluoride) ferroelectret. Journal of Applied Polymer Science, 136(20), 8 pages. Lien externe
Jalali Dil, E., Ben Dhieb, F., & Ajji, A. (2019). Modeling the effect of nanoplatelets orientation on gas permeability of polymer nanocomposites. Polymer, 168, 126-130. Lien externe
Khandal, D., Riedl, B., Tavares, J. R., Carreau, P., & Heuzey, M.-C. (2019). Tailoring cellulose nanocrystals rheological behavior in aqueous suspensions through surface functionalization with polyethyleneimine. Physics of Fluids, 31(2), 021207. Disponible
Knoch, S., Chouinard, G., Dumont, M.-J., & Tavares, J. R. (2019). Dip-dip-dry: Solvent-induced tuning of polylactic acid surface properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 578, 10 pages. Lien externe
Mazerolles, T., Heuzey, M.-C., Soliman, M., Martens, H., Kleppinger, R., & Huneault, M. A. (2019). Development of co-continuous morphology in blends of thermoplastic starch and low-density polyethylene. Carbohydrate Polymers, 206, 757-766. Lien externe
Nakhaei, M. R., Mostafapour, A., Dubois, C., Naderi, G., & Reza Ghoreishy, M. H. (2019). Study of morphology and mechanical properties of PP/EPDM/clay nanocomposites prepared using twin-screw extruder and friction stir process. Polymer Composites, 40(8), 3306-3314. Lien externe
Nasraoui, M. T., Chakhari, J., Khalfi, B., & Nasri, M. (2019). Modeling and analysis of a bolted joint under tension and shear loads. Transactions of the Canadian Society for Mechanical Engineering, 43(3), 376-386. Lien externe
Nofar, M., Sacligil, D., Carreau, P., Kamal, M. R., & Heuzey, M.-C. (2019). Poly (lactic acid) blends: processing, properties and applications. International Journal of Biological Macromolecules, 125, 307-360. Lien externe
Paran, S. M. R., Naderi, G., Shokoohi, S., Ebadati, J., & Dubois, C. (2019). Mechanical and Thermal Properties of Green Thermoplastic Elastomer Vulcanizate Nanocomposites Based on Poly (vinyl chloride) and Nitrile Butadiene Rubber Containing Organoclay and Rice Straw Natural Fibers. Journal of Polymers and the Environment, 27(9), 2017-2026. Lien externe
Pichon, H., Piollet, E., & Ross, A. (2019). An acoustic trade-off chart for the design of multilayer acoustic packages. Applied Acoustics, 148, 9-18. Lien externe
Piollet, E., Fotsing, E.-R., Ross, A., & Michon, G. (2019). High damping and nonlinear vibration of sandwich beams with entangled cross-linked fibres as core material. Composites Part B: Engineering, 168, 353-366. Lien externe
Rokbani, H., Daigle, F., & Ajji, A. (2019). Long- and short-term antibacterial properties of low-density polyethylene-based films coated with zinc oxide nanoparticles for potential use in food packaging. Journal of Plastic Film and Sheeting, 35(2), 117-134. Lien externe
Sabri, F., Berthomier, K., Wang, C.-S., Fradette, L., Tavares, J. R., & Virgilio, N. (2019). Tuning particle–particle interactions to control Pickering emulsions constituents separation. Green Chemistry, 21(5), 1065-1074. Disponible
Xu, Y., Ajji, A., & Heuzey, M.-C. (2019). Response behaviors and mechanical strength of thermal responsive hydrogels fabricated by electrospinning. Polymer, 183, 8 pages. Lien externe
Zamir, S. S., Frouzanmehr, M. R., Nagalakshmaiah, M., Ajji, A., Robert, M., & Elkoun, S. (2019). Chemical compatibility of lactic acid-grafted starch nanocrystals (SNCs) with polylactic acid (PLA). Polymer Bulletin, 76(7), 3481-3499. Lien externe
