<  Back to the Polytechnique Montréal portal

Items where Author is "Vadean, Aurelian"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: A | B | C | D | F | G | H | L | M | O | R | S | V | Y
Number of items: 63.

A

Achiche, S., Maier, A., Milanova, K., & Vadean, A. (2014, November). Visual, product evaluation: Using the semantic differential to investigate the influence of basic vase geometry on users' perception [Paper]. ASME 2014 International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec (10 pages). External link

B

Biron, G., Vadean, A., & Tudose, L. (2013). Optimal design of interference fit assemblies subjected to fatigue loads : a sequential approximate multi-objective optimization approach. Structural and Multidisciplinary Optimization, 47(3), 441-451. External link

Becker, M., Spooner, D., Huet, G., Sanschagrin, B., Vadean, A., & Camarero, R. (2010, June). The designer's logbook: a best practice for engineering students, an insightful assessment medium for educators [Paper]. 6th International CDIO Conference, Making Change Last : Sustaining and globalizing Engineering Educational Reform, Montréal, Québec. Unavailable

Bougherara, H., Bureau, M., Campbell, M., Vadean, A., & Yahia, L. (2007). Design of a Biomimetic Polymer-Composite Hip Prosthesis. Journal of Biomedical Materials Research. Part A, 82A(1), 27-40. External link

C

Chouinard, U., Cio, Y.-S. L.-K., Vadean, A., & Achiche, S. (2020, October). Concurrent modeling of positive and negative dependencies in the design structure matrix using complex numbers [Paper]. 22nd International Dependency and Structure Modeling Conference (DSM 2020), Cambridge, Massachusetts. External link

Chaib, Z., Daidié, A., Guillot, J., & Vadean, A. (2005, November). Study of a bolted and screwed fixation of a slewing bearing [Paper]. 4th International Conference Integrated Design and Production, Casablanca, Maroc. Unavailable

D

Dugre, A., Vadean, A., & Chaussee, J. (2016). Challenges of using topology optimization for the design of pressurized stiffened panels. Structural and Multidisciplinary Optimization, 53(2), 303-320. External link

Dulong, S., Lévesque, M., Li, C., & Vadean, A. (2013, July). Experimental investigation of physical aging effect of the mechanical properties of a carbon/polyimide braided composite [Paper]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. External link

Divialle, A., Vadean, A., Vaclav, K., & Yahia, L. (2008, June). Thermodynamic model of bone remodeling : numerical implementation [Paper]. 31st Annual Conference Canadian Medical and Biological Engineering Society (CMBEC 2008), Montréal, Québec. External link

F

Farid, G., Boukhili, R., & Vadean, A. (2016, July). Static and fatigue behavior multi-bolted/bonded single-lap joints in woven composite plates [Paper]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Unavailable

G

Gamache, J.-F., Vadean, A., Capo, M., Rochefort-Beaudoin, T., Dodane, N., & Achiche, S. (2023). Complexity-driven layout exploration for aircraft structures. Design Science, 9, 34 pages. External link

Gamdani, F., Boukhili, R., & Vadean, A. (2022). Fatigue behavior of hybrid multi-bolted-bonded single-lap joints in woven composite plates. International Journal of Fatigue, 158, 10 pages. External link

Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (2021). On generating stiffening layouts with density-based topology optimization considering buckling. CEAS Aeronautical Journal, 12(4), 863-877. External link

Gamache, J.-F., Vadean, A., Dodane, N., & Achiche, S. (2020, August). Topology Optimization for Stiffened Panels: A Ground Structure Method [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. External link

Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2019). Rebuttal to comments by R. Dumas. Multibody System Dynamics, 47(4), 439-440. External link

Gamdani, F., Boukhili, R., & Vadean, A. (2019). Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates. International Journal of Adhesion and Adhesives, 95, 11 pages. External link

Gamache, J.-F., Vadean, A., & Achiche, S. (2019, May). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Paper]. Canadian Aeronautics and Space Institute (AERO 19), Laval, Québec, Canada (4 pages). External link

Gamache, J.-F., Vadean, A., & Achiche, S. (2019, May). Validating Novel Stiffened Panel Configuration Generated with Topology Optimization using Non-Linear Analysis [Paper]. 39th Conference on Applied Statistics in Ireland (CASI 2019), Dublin, Ireland (4 pages). Unavailable

Gamache, J.-F., Vadean, A., Noirot-Nérin, É., Beaini, D., & Achiche, S. (2018). Image-based truss recognition for density-based topology optimization approach. Structural and Multidisciplinary Optimization, 58(6), 2697-2709. External link

Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2018). Influence of the load modelling during gait on the stress distribution in a femoral implant. Multibody System Dynamics, 44(1), 93-105. External link

Gamache, J.-F., Vadean, A., & Achiche, S. (2018, August). Topology Optimization for the Design of Stiffened Panels for Wing Box [Paper]. Proceedings of Design Science Research 2018: Data-Driven Design and Learning, Montréal, Canada. Unavailable

Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2017, June). Development of a Tool for the Sensitivity Analysis of Design Parameters of Femoral Implants in the Human Body During Gait [Paper]. 8th ECCOMAS Thematic Conference on MULTIBODY DYNAMICS, Prague, République tchèque. Unavailable

Gamdani, F., Boukhili, R., & Vadean, A. (2017, August). Tensile behavior of hybrid multi-bolted/bonded joints with carbon/epoxy composites [Paper]. 21st International Conference on Composite Materials (ICCM 2017), Xi'an, China. Unavailable

Gervais, B., Vadean, A., Raison, M., & Brochu, M. (2016). Failure analysis of a 316L stainless steel femoral orthopedic implant. Case Studies in Engineering Failure Analysis, 5-6, 30-38. Available

Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2016, May). Dynamical evolution of stress distribution of a femoral orthopedic implant using multibody dynamics with finite element modeling [Paper]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec (3 pages). Unavailable

Gervais, B., Vadean, A., Brochu, M., & Raison, M. (2016, May). Evolution of the stress distribution of a femoral orthopedic implant by combining multibody dynamics and finite element modeling [Paper]. 4th Joint International Conference on Multibody System Dynamics (IMSD 2016), Montréal, Québec. Unavailable

Gamdani, F., Boukhili, R., & Vadean, A. (2015). Tensile strength of open-hole, pin-loaded and multi-bolted single-lap joints in woven composite plates. Materials & Design, 88, 702-712. External link

H

Hernandez, S., Achiche, S., Spooner, D., Vadean, A., & Raison, M. (2020, August). On Supporting the Learning of Biomechanics Using Multidisciplinary Physical Prototyping [Paper]. ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages). External link

Hubert, P., Dano, M.-L., Vadean, A., & Li, C. (2018). Development of new repair technologies for out-of-autoclave aircraft composite components. (Technical Report n° STO-MP-AVT-266). Unavailable

Huet, G., Vadean, A., Spooner, D., & Camarero, R. (2009, September). Knowledge management : a new educational challenge for student design projects [Paper]. 11th Conference on Engineering and Product Design Education, Brighton, England. External link

Huet, G., Sanschagrin, B., Gagnon, M., Spooner, D., Vadean, A., & Camarero, R. (2008, June). The assessment of student teamwork to promote CDIO learning objectives [Paper]. 4th International CDIO Conference, Gent, Belgium. External link

Huet, G., Spooner, D., Vadean, A., Leblanc, T., Camarero, R., & Fortin, C. (2008, September). Development of collaborative and social skills through multidisciplinary design projects [Paper]. International Conference on Engineering and Product Design Education, Barcelona, Spain. External link

L

Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2021). Evolutionary layout design synthesis of an autonomous greenhouse using product-related dependencies. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 35(1), 49-64. External link

Law-Kam Cio, Y.-S., Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2020, August). Objective reduction using axiomatic design and product-related dependencies : a layout synthesis of an autonomous greenhouse case study [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (10 pages). External link

Luk-Cyr, J., Paquet, D., Lanteigne, J., Champliaud, H., & Vadean, A. (2017). A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behaviour. Acta Mechanica Solida Sinica, 30(1), 27-37. External link

Luk-Cyr, J., El-Bawab, R., Lanteigne, J., Champliaud, H., & Vadean, A. (2016). Mechanical properties of 75% Ar / 25% CO2 flux-cored arc welded E309L austenitic stainless steel. Materials Science and Engineering: A, 678, 197-203. External link

Luk-Cyr, J., El-Bawab, R., Champliaud, H., Lanteigne, J., & Vadean, A. (2016). Sequential approximate optimization of industrial hammer peening using finite element simulations. Structural and Multidisciplinary Optimization, 55(3), 767-778. External link

Lanoue, F., Vadean, A., & Sanschagrin, B. (2011). Fretting fatigue strength reduction factor for interference fits. Simulation Modelling Practice and Theory, 19(9), 1811-1823. External link

Lanoue, F., Vadean, A., & Sanschagrin, B. (2009). Finite element analysis and contact modelling considerations of interference fits for fretting fatigue strength calculations. Simulation Modelling Practice and Theory, 17(10), 1587-1602. External link

Leray, D., Vadean, A., & Daidie, A. (2008). Fast Computation of Preloaded Bolted Circular Joint Aiming at Fatigue Bolt Sizing - Hypotheses and Modeling. Engineering Computations, 25(1-2), 42-54. External link

M

Ma, Y., Vadean, A., Beltrame, G., & Achiche, S. (2021, October). Conceptual design of a nano satellite incubator using axiomatic design and a mechatronic multicriteria profile [Paper]. 23rd International Dependency and Structure Modeling Conference (DSM 2021), Montreal, Québec (10 pages). External link

Morada, G., Vadean, A., & Boukhili, R. (2017). Failure mechanisms of a sandwich beam with an ATH/epoxy core under static and dynamic three-point bending. Composite Structures, 176, 281-293. External link

Morada, G., Ouadday, R., Vadean, A., & Boukhili, R. (2017). Low-velocity impact resistance of ATH/epoxy core sandwich composite panels: Experimental and numerical analyses. Composites Part B: Engineering, 114, 418-431. External link

Michel, A., Kaabi, A., & Vadean, A. (2016, July). Design improvement study of scarf repair for composite structures [Paper]. 2nd International Conference on Mechanics of Composites, Porto, Portugal. Unavailable

Morada, G., Marouene, A., Vadean, A., & Boukhili, R. (2016, August). Numerical analysis on compression failure mechanisms of impacted non-crimp fabric reinforced composites [Paper]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. External link

Michel, L., Vadean, A., & Benoit, R. (2011). Tire burst phenomenon and rupture of a typical truck tire bead design. Tire Science and Technology, 39(4), 270-283. External link

O

Ouadday, R., Abusrea, M., Boukhili, R., & Vadean, A. (2023). Modeling of the effect of ATH fillers on the rheology, curing kinetics, and flexural properties of the epoxy resin forming the hydraulic turbines' stay vanes extension. Mechanics of Advanced Materials and Structures, 15 pages. External link

Ouadday, R., Marouene, A., Morada, G., Kaabi, A., Boukhili, R., & Vadean, A. (2018). Experimental and numerical investigation on the impact behavior of dual-core composite sandwich panels designed for hydraulic turbine applications. Composite Structures, 185, 254-263. External link

Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (2016, August). Effect of alumina trihydrate concentration on physical and mechanical properties of ATH/vinylester composite [Paper]. 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016), Montréal, Québec. External link

Ouadday, R., Kaabi, A., Boukhili, R., & Vadean, A. (2016, August). Effect of alumina trihydrate particle size on physical and mechanical properties of ATH/vinylester composite [Paper]. 24th International Congress of Theoretical and Applied Mechanics, Montréal, Québec. Unavailable

Ouellet, M., & Vadean, A. (2013, June). Design improvement of hybrid composite joints by axiomatic design [Paper]. 7th International Conference on Axiomatic Design (ICAD2013), Worcester, NY United States. External link

Ouadday, R., Boukhili, R., & Vadean, A. (2013, October). Investigation of thick multicore sandwich constructions under low velocity impact and static indentation [Paper]. Symposium on Advances in Hydroelectric Turbine Manufacturing and Repair, Montréal, Québec. Unavailable

R

Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (2023). Supervised deep learning for the moving morphable components topology optimization framework. Engineering Applications of Artificial Intelligence, 123, 15 pages. External link

Rochefort-Beaudoin, T., Vadean, A., Gamache, J.-F., & Achiche, S. (2022, August). Comparative study of first-order moving asymptotes optimizers for the moving morphable components topology optimization framework [Paper]. ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC 2022), St. Louis, MO, USA. External link

S

Spooner, D., & Vadean, A. (2013, May). L'enseignement du design transdisciplinaire de produits et de procédés [Paper]. Journée MATI, Montréal, Québec. Unavailable

Spooner, D., Huet, G., Fortin, C., Vadean, A., & Niewoehner, R. (2009, June). The assessment of engineering reasoning recorded in student engineering design journal [Paper]. 5th International CDIO Conference, Singapore. External link

Surcel, M., Buzatu, P., & Vadean, A. (2009, August). Numerical simulation for evaluating child occupant behaviour in the case of a rear impact [Paper]. International Technical Conference on the Enhanced Safety of Vehicles, Stuttgart, Germany. Unavailable

Spooner, D., Sanschagrin, B., Gagnon, M., Vadean, A., Camarero, R., Leblanc, T., & Poirier, D. (2008, June). Fostering team dynamics across and engineering curriculum [Paper]. 4th International CDIO Conference, Gent, Belgium. External link

Sanschagrin, B., Fortin, C., Vadean, A., & Lakis, A. A. (2005, July). Virtual product development within a fourth year option in the mechanical engineering curriculum [Paper]. Canadian Design Engineering Network Conference, Kaninaskis, Alberta, Canada. External link

V

Vadean, A., Abusrea, M., Shazly, M., Michel, A., Kaabi, A., & Boukhili, R. (2022). Improvement of scarf repair patch shape for composite aircraft structures. Journal of Adhesion Science and Technology, 99(6), 1044-1070. External link

Vadean, A., Leray, D., & Guillot, J. (2006). Bolted joints for very large bearings - Numerical model development. Finite Elements in Analysis and Design, 42(4), 298-313. External link

Vadean, A., Leray, D., Lakiss, H., & Guillot, J. (2000, May). A Hybrid Calculation Model for Bolted Assemblies Used for Slewing Bearings [Paper]. Third IDMME Conference, Montreal, Canada. External link

Y

Yang, J., Chen, Z. C., & Vadean, A. (2008, June). Application of an analytical-and-FEA coupled optimization approach to gear train design [Paper]. CSME Forum, Ottawa. Unavailable

List generated on: Mon Jun 24 15:27:12 2024 EDT