 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Bahloul, A., Djebara, A., Saidi, M. N., Songmene, V., Villalpando, F., & Reggio, M. (2019). Computational and Experimental Analysis of Ultrafine Particle Dispersion During Granite Polishing. Aerosol Science and Engineering, 3(1), 21-31. Lien externe
Javadi, H., Jomaa, W., Songmene, V., Brochu, M., & Bocher, P. (2019). Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing, 20(8), 1297-1310. Lien externe
Shnfir, M., Olufayo, O. A., Jomaa, W., & Songmene, V. (2019). Machinability Study of Hardened 1045 Steel When Milling with Ceramic Cutting Inserts. Materials, 12(23), 3974 (21 pages). Lien externe
Niknam, S. A., Saberi, M., Kouam, J., Hashemi, R., Songmene, V., & Balazinski, M. (2019). Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC). Journal of Central South University, 26(6), 1563-1572. Lien externe
Sadeghifar, M., Sedaghati, R., Jomaa, W., & Songmene, V. (2018). A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions. International Journal of Advanced Manufacturing Technology, 96(9), 3747-3791. Lien externe
Sadeghifar, M., Sedaghati, R., Jomaa, W., & Songmene, V. (2018). Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel. International Journal of Advanced Manufacturing Technology, 94(5), 2457-2474. Lien externe
Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (2017). Finite element simulation and analysis of serrated chip formation during high–speed machining of AA7075–T651 alloy. Journal of Manufacturing Processes, 26, 446-458. Lien externe
Jomaa, W., Songmene, V., & Bocher, P. (2017). Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals. Machining Science and Technology, 21(3), 335-361. Lien externe
Niknam, S. A., Balazinski, M., & Songmene, V. (2017). To characterize and optimize the surface quality attributes in slot milling operation. International Journal of Advanced Manufacturing Technology, 97(1-4), 727-746. Lien externe
Jomaa, W., Songmene, V., & Bocher, P. (2016). An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations. Journal of Materials Engineering and Performance, 25(3), 1010-1027. Lien externe
Jomaa, W., Songmene, V., & Bocher, P. (2016). An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel. Materials and Manufacturing Processes, 31(7), 838-844. Lien externe
Jomaa, W., Songmene, V., & Bocher, P. (2014). Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials, 7(3), 1603-1624. Lien externe
Nadeau, S., Bouchard, M., Debia, M., De Marcellis-Warin, N., Halle, S., Songmene, V., Therrien, M.-C., Wilkinson, K., Ateme-Nguema, B., Dufour, G., Dufresne, A., Fatisson, J., Haddad, S., Hadioui, M., Kouam, J., Morency, F., Tardif, R., Viens, M., Weichenthal, S., ... Camus, M. (2013). EquiNanos: Innovative team for nanoparticle risk management. Nanomedicine: Nanotechnology, Biology, and Medicine, 9(1), 22-24. Lien externe
Bahloul, A., Jorge, R. F. V., Djebara, A., Songmene, V., Saidi, M. N., Kouam, J., Reggio, M., & Villalpando, F. (2019). Transformation du granit : caractérisation et contrôle de la poussière de la silice émise par le polissage. (Rapport technique n° R-1054). Lien externe
Jomaa, W., Songmene, V., Bocher, P., & Gakwaya, A. (septembre 2017). FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 [Communication écrite]. 9th International Congress on Precision Machining (ICPM 2017), Athènes, Grèce. Publié dans Solid State Phenomena, 261. Lien externe
Jomaa, W., Mechri, O., Lévesque, J., Songmene, V., Bocher, P., & Gakwaya, A. (septembre 2016). Finite element analysis of serrated chip formation in machining of 7075-t651 aluminum alloy [Communication écrite]. International Mineral Processing Congress (IMPC 2016), Québec, Québec. Non disponible
Jomaa, W., Daoud, M., Songmene, V., Bocher, P., & Châtelain, J.-F. (novembre 2014). Identification and Validation of Marusich's Constitutive Law for Finite Element Modeling of High Speed Machining [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec (6 pages). Lien externe
Niknam, S. A., Wygowski, W., Balazinski, M., & Songmene, V. (2014). Milling Burr Formation and Avoidance. Dans Machinability of Advanced Materials (p. 57-93). Lien externe
