 | Monter d'un niveau |
Sauriol, P., Pasikhani, J. V., Shabanian, J., & Chaouki, J. (2023). Gas jet penetration in gas-solid fluidized and jetting-fluidized beds-A review. Powder Technology, 421, 118392 (22 pages). Lien externe
Yari, B., Sauriol, P., & Chaouki, J. (2021). Dehydration of lithium dihydrogenphosphate in a ball-mill rotary-kiln (BaMRoK) reactor. Canadian Journal of Chemical Engineering, 99(3), 667-679. Lien externe
Tao, L., Samih, S., Sauriol, P., & Chaouki, J. (2021). Synthesis of Li4Ti5O12 negative electrode material in a fluidized bed thermogravimetric analyzer. Canadian Journal of Chemical Engineering, 99(8), 1836-1848. Lien externe
Yari, B., Beaulieu, C., Sauriol, P., Bertrand, F., & Chaouki, J. (2020). Size segregation of bidisperse granular mixtures in rotating drum. Powder Technology, 374, 172-184. Lien externe
Norouzi Banis, M., Wang, Z., Rousselot, S., Liu, Y., Hu, Y., Talebi-Esfandarani, M., Bibienne, T., Gauthier, M., Li, R., Liang, G., Dollé, M., Sauriol, P., Sham, T.-K., & Sun, X. (2019). Chemical Speciation and Mapping of the Si in Si Doped LFP Ingot with Synchrotron Radiation Technique. Canadian Journal of Chemical Engineering, 97(8), 2211-2217. Lien externe
Shabanian, J., Sauriol, P., Rakib, A., & Chaouki, J. (2019). Defluidization Prediction and Prevention during Cocombustion of ReEngineered Feedstock with Coal in a Bubbling Fluidized Bed Combustor. Energy & Fuels, 33(2), 10603-1621. Lien externe
Sauriol, P., Li, D., Hadidi, L., Villazon, H., Jin, L., Yari, B., Gauthier, M., Dolle, M., Chartrand, P., Kasprzak, W., Liang, G., & Patience, G. S. (2019). Fe³⁺ reduction during melt-synthesis of LiFePO₄. Canadian Journal of Chemical Engineering, 97(8), 2196-2210. Lien externe
Sarbarze, S. A., Latifi, M., Sauriol, P., & Chaouki, J. (2019). Gas-phase carbon coating of LiFePO₄ nanoparticles in fluidized bed reactor. Canadian Journal of Chemical Engineering, 97(8), 2259-2272. Lien externe
Rigamonti, M. G., Song, Y.-X., Li, H., Saadatkhah, N., Sauriol, P., & Patience, G. S. (2019). Influence of atomization conditions on spray drying Lithium Iron Phosphate nanoparticle suspensions. Canadian Journal of Chemical Engineering, 97(8), 2251-2258. Lien externe
Yari, B., Sauriol, P., & Chaouki, J. (2019). Kinetics of the Dehydration of Lithium Dihydrogenphosphate. Canadian Journal of Chemical Engineering, 97(8), 2273-2286. Lien externe
Villazon, H., Sauriol, P., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Gauthier, M., Liang, G., Dollé, M., & Chartrand, P. (2019). Melt-Synthesis of LiFePO4 over a Metallic Bath. Canadian Journal of Chemical Engineering, 97(8), 2287-2298. Lien externe
Patience, G. S., Chaouki, J., Latifi, M., Dollé, M., Chartrand, P., Kasprzak, W., Sun, X., Sham, T.-K., Liang, G., & Sauriol, P. (2019). Piloting Melt Synthesis and Manufacturing Processes to Produce C-LiFePO₄: Preface. Canadian Journal of Chemical Engineering, 97(8), 2189-2195. Lien externe
Liu, Y., Banis, M. N., Xiao, W., Li, R., Wang, Z., Adair, K. R., Rousselot, S., Sauriol, P., Dollé, M., Liang, G., Sham, T.-K., & Sun, X. (2019). Visualization of the Secondary Phase in LiFePO₄ Ingots with Advanced Mapping Techniques. Canadian Journal of Chemical Engineering, 97(8), 2218-2223. Lien externe
Li, H., Ndjamo, A., Sauriol, P., & Patience, G. S. (2017). Optimization of LiFePO₄ wet media milling and regressive population balance modeling. Advanced Powder Technology, 28(3), 1000-1007. Lien externe
Shabanian, J., Sauriol, P., & Chaouki, J. (2017). A simple and robust approach for early detection of defluidization. Chemical Engineering Journal, 313, 144-156. Lien externe
Kasprzak, W., Li, D., Patience, G. S., Sauriol, P., Amaris, H. V., Dollé, M., Gauthier, M., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Sun, X., Liu, Y., & Liang, G. (2017). Using induction melting to make lithium-ion battery material. Advanced Materials & Processes, 175(8), 16-22. Lien externe
Talebi-Esfandarani, M., Rousselot, S., Jin, L., Bibienne, T., Gauthier, M., Chartrand, P., Sauriol, P., Seifitokaldani, A., & Dollé, M. (2016). On the Versatility of Melt-Synthesis of LiFePO4 cathode Material. Meeting abstracts, MA2016-03(2), 1022-1022. Lien externe
Talebi-Esfandarani, M., Rousselot, S., Jin, L., Bibienne, T., Chartrand, P., Sauriol, P., Seifitokaldani, A., & Dollé, M. (2016). Melt Synthesis of LiFePO4: Fundamentals, Versatility and Application. Meeting abstracts, MA2016-02(3), 503-503. Lien externe
Talebi-Esfandarani, M., Rousselot, S., Gauthier, M., Sauriol, P., Duttine, M., Wattiaux, A., Liu, Y., Sun, A. X., Liang, G., & Dolle, M. (2016). Control of the LiFePO₄ electrochemical properties using low-cost iron precursor in a melt process. Journal of Solid State Electrochemistry, 20(12), 3481-3490. Lien externe
Talebi-Esfandarani, M., Rousselot, S., Gauthier, M., Sauriol, P., Liang, G., & Dolle, M. (2016). LiFePO₄ synthesized via melt synthesis using low-cost iron precursors. Journal of Solid State Electrochemistry, 20(7), 1821-1829. Lien externe
Sauriol, P., Cui, H., & Chaouki, J. (2013). Gas jet penetration lengths from upward and downward nozzles in dense gas–solid fluidized beds. Powder Technology, 235, 42-54. Lien externe
Sauriol, P., Cui, H., & Chaouki, J. (2013). Gas jet penetration lengths from upward and downward nozzles in dense gas-solid fluidized beds. Powder Technology, 235, 42-54. Lien externe
Sauriol, P., Cui, H., & Chaouki, J. (2012). Gas-solid structure in the vicinity of a sparger nozzle in a fluidized bed. Powder Technology, 228, 131-140. Lien externe
Cui, H., Sauriol, P., & Chaouki, J. (2003). High temperature fluidized bed reactor: Measurements, hydrodynamics and simulation. Chemical Engineering Science, 58(3-6), 1071-1077. Lien externe
Shabanian, J., Sauriol, P., Mostoufi, N., & Chaouki, J. (mai 2016). Performance evaluation of different approaches for early detection of defluidization [Communication écrite]. 15th International Conference on Fluidization (Fluidization for Emerging Green Technologies), Montebello, Québec. Publié dans Powder Technology, 316. Lien externe
Latifi, M., Rakib, A., Sauriol, P., Shabanian, J., & Chaouki, J. (juin 2016). Co-combustion of coal and a reengineered feedstock for emissions reduction [Communication écrite]. 5th International Congress on Green Process Engineering (GPE 2016), Fairmont Tremblant Hotel, Mont Tremblant, Quebec, Canada. Lien externe
Chaouki, J., Latifi, M., Sauriol, P., & Sarbarze, S. A. (mai 2016). Gas-phase carbon coating of LiFePO₄ for rechargeable batteries [Communication écrite]. Fluidization XV, Montebello, Canada. Lien externe
Shabanian, J., Sauriol, P., Rakib, A., & Chaouki, J. (mai 2014). Application of temperature and pressure signals for early detection of defluidization conditions [Communication écrite]. 7th World Congress on New Paradigm of Particle Science and Technology (WCPT 2014), Beijing, China. Publié dans Procedia Engineering, 102. Lien externe
Shabanian, J., Sauriol, P., Rakib, A., & Chaouki, J. (mai 2014). Characterization of gas-solid fluidization at high temperature by analysis of pressure signals [Communication écrite]. 11th International Conference on Fluidized Bed Technology, CFB 2014, Beijing, China. Non disponible
Sauriol, P. (2011). Hydrodynamique des jets de gaz orientés vers le haut et vers le bas dans les lits fluidisés gaz-solide [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Gauthier, M., Chartrand, P., Talebi-Esfandarani, M., Sauriol, P., Dollé, M., Dufour, J., & Liang, G. (2017). Processes for producing LiMXO₄ and products thereof. (Demande de brevet no US20170210624). Lien externe
Li, D., Kasprzak, W., Patience, G. S., Sauriol, P., Villazón Amarís, H., Dollé, M., Gauthier, M., Rousselot, S., Talebi-Esfandarani, M., Bibienne, T., Sun, X., Liu, Y., & Liang, G. (2018). Production of lithium-ion cathode material for automotive batteries using melting casting process. Dans 9th International Symposium on High-Temperature Metallurgical Processing (TMS 2018) (135-146). Lien externe
