Up a level |
This graph maps the connections between all the collaborators of {}'s publications listed on this page.
Each link represents a collaboration on the same publication. The thickness of the link represents the number of collaborations.
Use the mouse wheel or scroll gestures to zoom into the graph.
You can click on the nodes and links to highlight them and move the nodes by dragging them.
Hold down the "Ctrl" key or the "⌘" key while clicking on the nodes to open the list of this person's publications.
Lanoue, F., Vadean, A., & Sanschagrin, B. (2011). Fretting fatigue strength reduction factor for interference fits. Simulation Modelling Practice and Theory, 19(9), 1811-1823. External link
Becker, M., Spooner, D., Huet, G., Sanschagrin, B., Vadean, A., & Camarero, R. (2010, June). The designer's logbook: a best practice for engineering students, an insightful assessment medium for educators [Paper]. 6th International CDIO Conference, Making Change Last : Sustaining and globalizing Engineering Educational Reform, Montréal, Québec. Unavailable
Lanoue, F., Vadean, A., & Sanschagrin, B. (2009). Finite element analysis and contact modelling considerations of interference fits for fretting fatigue strength calculations. Simulation Modelling Practice and Theory, 17(10), 1587-1602. External link
Huet, G., Sanschagrin, B., Gagnon, M., Spooner, D., Vadean, A., & Camarero, R. (2008, June). The assessment of student teamwork to promote CDIO learning objectives [Paper]. 4th International CDIO Conference, Ghent, Belgium. External link
Spooner, D., Sanschagrin, B., Gagnon, M., Vadean, A., Camarero, R., Leblanc, T., & Poirier, D. (2008, June). Fostering team dynamics across and engineering curriculum [Paper]. 4th International CDIO Conference, Ghent, Belgium. External link
Ben Daly, H., Cole, K. C., Nguyen, K. T., & Sanschagrin, B. (2007). Characterization of Molecular Orientation in Injection-Stretch-Blow-Molded Poly(Ethylene Terephthalate) Bottles by Means of External Reflection Infrared Spectroscopy. Journal of Applied Polymer Science, 104(2), 1319-1327. External link
Pomerleau, J., & Sanschagrin, B. (2006). Injection molding shrinkage of PP: experimental progress. Polymer Engineering and Science, 46(9), 1275-1283. External link
Boucekine, Y., Sanschagrin, B., & Derdouri, A. (2006, May). Investigation of re-crystallization of injection molded TPO unpainted plaques [Paper]. ANTEC 2006, Charlotte, NC, United States. External link
Thomasset, J., Carreau, P., Sanschagrin, B., & Ausias, G. (2005). Rheological properties of long glass fiber filled polypropylene. Journal of Non-Newtonian Fluid Mechanics, 125(1), 25-34. External link
Messaoud, D. A., Sanschagrin, B., & Derdouri, A. (2005). Study on mechanical properties and material distribution of sandwich plaques molded by co-injection. Polymer Composites, 26(3), 265-275. External link
Sanschagrin, B., Fortin, C., Vadean, A., & Lakis, A. A. (2005, July). Virtual product development within a fourth year option in the mechanical engineering curriculum [Paper]. Canadian Design Engineering Network Conference, Kaninaskis, Alberta, Canada. External link
Messaoud, D., Sanschagrin, B., & Derdouri, A. Study on mechanical properties and material distribution of sandwich plaques moldes by co-injection [Paper]. Society of Plastics Engineers. Technical Conference, Nashville, TN. Unavailable
Messaoud, D. A., Sanschagrin, B., & Derdouri, A. Co-injection molding: effect of processing on material distribution and mechanical properties of short glass fiber-reinforced polypropylene test bars [Paper]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. External link
Daly, H. B., Cole, K. C., Ajji, A., Nguyen, K. T., & Sanschagrin, B. (2002, May). Molecular orientation in injection-blow-molded bottles [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link
Boudaouara, A., Bouti, A., & Sanschagrin, B. (2002, May). Optimization of thermal sprue for hot runner molds [Paper]. ANTEC 2002. 60th SPE Annual Technical Conference, San Francisco, Ca., USA. External link
Diallo, M. L., Simonet, P., Frenette, B., & Sanschagrin, B. (2001). Resistance of plastic ophthalmic lenses : The effect of base curve on different materials during static load testing. Optometry and vision science, 78(7), 518-524. External link
Becerra, R. A., & Sanschagrin, B. Roving impregnation with thermoplastic for pultrusion [Paper]. ANTEC : Annual Technical Conference. Society of Plastics Engineers. External link
Daly, H. B., Sanschagrin, B., Nguyen, K. T., & Cole, K. C. (1999). Effect of polymer properties on the structure of injection-molded parts. Polymer Engineering and Science, 39(9), 1736-1751. External link
Ben Daly, H., Cole, K. C., Sanschagrin, B., & Nguyen, K. T. (1999). An Experimental technique for the characterization of molecular orientation through the thickness of plastic products. Polymer Engineering and Science, 39(10), 1982-1992. External link
Charrier, J.-M., & Sanschagrin, B. (1999, May). Integrated use of educational software for product/process design [Paper]. Antec '99. Volume III, New York City, USA. External link
Cole, K. C., Ben Daly, H., Sanschagrin, B., Nguyen, K. T., & Ajji, A. (1999). A New Approach to the Characterization of Molecular Orientation in Uniaxially and Biaxially Oriented Samples of Poly(Ethylene Terephthalate). Polymer, 40(12), 3505-3513. External link
Ben, D. H., Nguyen, K. T., Sanschagrin, B., & Cole, K. C. (1998). The build-up and measurement of molecular orientation, crystalline morphology, and residual stresses in injection molded parts : A review. Journal of injection molding technology, 2(2), 59-85. Unavailable
Ben, D. H., Nguyen, K. T., Cole, K. C., & Sanschagrin, B. (1998, September). Determination of the biaxial orientation in injection-blow-moulded bottles [Paper]. International Symposium on Orientation of Polymers: Application to Films and Fibres, Boucherville, Qc. Unavailable
Cole, K. C., Ben Daly, H., Sanschagrin, B., Nguyen, K. T., & Ajji, A. (1998, April). New approach to the characterisation of molecular orientation in uniaxially and biaxially stretched samples of petp [Paper]. Antec '98. Volume II, Atlanta, Ga.. External link
Daly, H. B., Cole, K. C., Sanschagrin, B., & Nguyen, K. T. (1997, April). Determination of molecular orientation in molded samples of PEEK, HDPE and LCP [Paper]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. External link
Charrier, J.-M., & Sanschagrin, B. (1997, April). Education/training software for schools and industry [Paper]. Antec 97. Volume III, Toronto. External link
Daly, H. B., Cole, K. C., Sanschagrin, B., & Nguyen, K. T. (1997, April). Experimental technique for the characterization of molecular orientation through the thickness of plastic products [Paper]. 1997 55th Annual Technical Conference, ANTEC, Toronto, Can. External link
Bélanger, B., Sanschagrin, B., & Fisa, B. (1997). Injection molding and properties of highly filled copper-polyamide 11 composites. Journal of Thermoplastic Composite Materials, 10(6), 532-542. External link
Mamat, A., Trochu, F., & Sanschagrin, B. (1995). Analysis of shrinkage by dual kriging for filled and unfilled polypropylene molded parts. Polymer Engineering and Science, 35(19), 1511-1520. External link
Chen, C., Nguyen, K. T., Sanschagrin, B., & Piché, L. (1994, May). Characterization of controlled-degradation polypropylene [Paper]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Unavailable
Provost, A. Y., Nguyen, K. T., Sanschagrin, B., & Connolly, R. (1994, May). Effect of pressure on the crystallization kinetics of poly(ethylene terephthalate) [Paper]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Unavailable
Arpin, B., Lafleur, P., & Sanschagrin, B. (1994). A personal computer software program for coathanger die simulation. Polymer Engineering and Science, 34(8), 657-664. External link
Kamanayo, G., Trochu, F., & Sanschagrin, B. (1994). Prediction of shrinkage by dual kriging for injection-molded polypropylene plaques. Advances in Polymer Technology, 13(4), 305-314. External link
Mamat, A., Trochu, F., & Sanschagrin, B. (1994, May). Shrinkage analysis of injection molded polypropylene parts [Paper]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Unavailable
Sean, S. T., Sanschagrin, B., Kokta, B. V., & Maldas, D. (1991). Effects of processing variables on the mechanical properties of compression molded polystyrene-wood fiber composites. Angewandte Makromolekulare Chemie, 184(1), 157-166. External link