Documents dont l'auteur est "Marchand, Luc"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : Article de revue | Communication écrite | Chapitre de livre

Nombre de documents: 50

Article de revue

Jolly, P., & Marchand, L. (2009). Leakage predictions for static gasket based on the porous media theory. Journal of Pressure Vessel Technology, 131(2), 021203-021203. Lien externe

Jolly, P., & Marchand, L. (2008). A 3D regression surface for the room temperature tightness gasket data reduction and bolt load design. International Journal of Pressure Vessels and Piping, 85(7), 441-449. Lien externe

Brown, W., Marchand, L., & Derenne, M. (2006). Optimised/harmonised room temperature leakage test procedure for generation of asme & cen code gasket factors - analytical phase. Welding Research Council Bulletin, 508, 84-84. Lien externe

Arghavani, J., Derenne, M., & Marchand, L. (2003). Effect of Surface Characteristics on Compressive Stress and Leakage Rate in Gasketed Flanged Joints. International Journal of Advanced Manufacturing Technology, 21(10-11), 713-732. Lien externe

Derenne, M., Marchand, L., & Muggo, U. (2003). Exploratory investigation of joint working conditions on the elevated temperature behaviour of metal reinforced flexible graphite sheet materials. Welding Research Council Bulletin (484), 23-38. Non disponible

Bougid, A., Derenne, M., & Marchand, L. (2003). Long duration mechanical performance of PTFE based gasket materials. Welding Research Council Bulletin (484), 12-22. Non disponible

Birembaut, Y., & Marchand, L. (2002). Characterization of bolted flanged joints subjected to pressure and external bending moments. Welding Research Council Bulletin, 473. Non disponible

Marchand, L., Derenne, M., & Bouzid, H. (2002). Effect of the gasket type on the behavior of NPS 4 class 150 bolted flanged joints subjected to external bending loads. Welding Research Council Bulletin, 473. Non disponible

Arghavani, J., Derenne, M., & Marchand, L. (2002). Prediction of gasket leakage rate and sealing performance through fuzzy logic. International Journal of Advanced Manufacturing Technology, 20(8), 612-620. Lien externe

Arghavani, J., Derenne, M., & Marchand, L. (2001). Fuzzy Logic Application in Gasket Selection and Sealing Performance. International Journal of Advanced Manufacturing Technology, 18(1), 67-78. Lien externe

Arghavani, J., Derenne, M., & Marchand, L. (2001). Sealing Performance of Gasketed Bolted Flanged Joints: a Fuzzy Decision Support System Approach. International Journal of Advanced Manufacturing Technology, 17(1), 2-10. Lien externe

Bouzid, A. H., Derenne, M., Marchand, L., & Payne, J. R. (2001). Service Temperature Characterization of Polytetrafluoroethylene-Based Gaskets. Journal of testing and evaluation, 29(5), 442-452. Lien externe

Mameri, N., Piron, D.-L., Bouzid, A., Derenne, M., Marchand, L., & Birembaut, Y. (2000). Corrosion Quantification Test for Flanges With Graphite-Based Gaskets. Materials Performance, 39(4), 64-69. Non disponible

Marchand, L., Laviolette, D., & Derenne, M. (2000). NPS 4 Class 150 bolted flanged joints subjected to pressure and external bending loads. Welding Research Council Bulletin (450), 1-20. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (1999). Effect of sealed joints tightness on steels corrosion: Development of novel technology. Environmental degradation of materials and corrosion control in metals, 287-299. Non disponible

Derenne, M., Marchand, L., & PAyne, J. R. (1999). Polytetrafluoroethylene (PTFE) gasket qualification. Welding Research Council Bulletin, 442, 1-65. Non disponible

Marchand, L., Derenne, M., & Payne, J. R. (1998). Summary of gasket steam leakage tests. Welding Research Council Bulletin, 431, 1-46. Non disponible

Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (1997). Elevated temperature characterization of flexible graphite sheet materials for bolted flanged joints. Welding Research Council Bulletin, 419, 1-88. Non disponible

Derenne, M., Marchand, L., & Deshaies, F. (1997). Leakage and emission characteristics of sheet gaskets. Welding Research Council Bulletin, 427, 1-61. Non disponible

Derenne, M., Marchand, L., Bazergui, A., & Payne, J. R. (1994). Elevated temperature testing of gaskets for bolted flanged connections. Welding Research Council Bulletin, 391, 1-37. Non disponible

Communication écrite

Brown, W., Marchand, L., Évrard, A., & Reeves, D. (juillet 2007). The effect of bolt size on the assembly nut factor [Communication écrite]. 2007 ASME Pressure Vessels and Piping Conference, PVP 2007, San Antonio, TX, United states. Lien externe

Brown, W., Marchand, L., & LaFrance, T. (juillet 2006). Bolt Anti-Seize Performance in a Process Plant Environment [Communication écrite]. ASME Joint Pressure Vessels and Piping and ICPVT Conference (PVP-ICPVT 2006), Vancouver, BC, Canada. Lien externe

Jolly, P., & Marchand, L. (juillet 2006). Leakage predictions for static gasket based on the porous media theory [Communication écrite]. ASME PVP2006/ICPVT-11 Conference, Vancouver, BC, Canada. Lien externe

Marchand, L., Derenne, M., & Masi, V. (juillet 2005). Predicting gasket leak rates using a laminar-molecular flow model [Communication écrite]. ASME Pressure Vessels and Piping Conference (PVP 2005), Denver, CO. Lien externe

Allam, M. A., Bazergui, A., Marchand, L., & Derenne, M. (juin 2002). Tube-to-tubesheet joints: maximum tensile stress and contact pressure due to thermal loading and temperature cycling [Communication écrite]. ASME international joint power generation conference-IJPGC 2002, Scottsdale, Arizona, USA. Lien externe

Marchand, L. (janvier 2001). Status of PVRC projects on an optimized and harmonized room temperature leakage test procedure [Communication écrite]. Generation of ASME & CEN code gasket factors, ASME PVP conference, Atlanta, Georgia. Non disponible

Sakr, O., Bouzid, H., Derenne, M., & Marchand, L. (janvier 2000). Correlation between PPMV and mass leakage rate of gasketing products [Communication écrite]. 9th international conference on pressure vessel technology ICPVT-9, Sydney, Australia. Non disponible

Derenne, M., Marchand, L., & Bouzid, H. (janvier 2000). Long term elevated temperature performance of metal reinforced flexible graphite sheet gaskets [Communication écrite]. 9th international conference on pressure vessel technology ICPVT-9, Sydney, Australia. Non disponible

Bouzid, H., Derenne, M., & Marchand, L. (janvier 2000). Preventing PTFE gasket blow-out [Communication écrite]. 9th international conference on pressure vessel technology ICPVT-9, Sydney, Australia. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., & Bouzid, A. (janvier 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 38th Canadian Conference of Metallurgists, Québec, Québec. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., & Marchand, L. (août 1999). Influence des joints d'étanchéité sur la corrosion des aciers: développement d'un nouvel appareillage [Communication écrite]. 1st International Symposium on Environmental Degradation of Materials and Corrosion Control In Metals (EDMCCM 1999), Québec, Québec. Non disponible

Mameri, N., Piron, D.-L., Derenne, M., Marchand, L., Bouzid, A., & Birembaut, Y. (août 1999). Influence the sealing of joints on the corrosion of steels. Development of new equipment [Communication écrite]. international symposium on environmental degradation of materials and corrosion control in metals - 38. annual conference of metallurgists of CIM. Gateway to the 21st Century, Québec City, QB. Non disponible

Hollinger, G. L., Hsu, K. H., Payne, J. R., Derenne, M., Bouzid, H., Marchand, L., Mueller, R., Waterland, J., & Winter, R. (janvier 1999). Look at today's gasket evaluation technology [Communication écrite]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC. Non disponible

Mameri, N., Bouzid, H., Derenne, M., Marchand, L., & Piron, D. L. (novembre 1999). Quantification of corrosion in bolted gasketed joints [Communication écrite]. 1st International Conference on Sealing Technology & Plant Leakage Reduction, Charlotte, NC, USA. Non disponible

Derenne, M., Payne, J. R., Bouzid, A., & Marchand, L. (janvier 1998). Proposed modifications to draft 9 of the standard test method for gasket constants for bolted joint design [Communication écrite]. Fluid sealing association symposium, Nashville, TN. Non disponible

Derenne, M., Marchand, L., & Payne, J. R. (juillet 1996). Characterization behaviour of flexible graphite sheet gasket materials [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible

Derenne, M., Marchand, L., & Payne, J. R. (janvier 1996). Characterization of the hot relaxation and gross leakage resistance behaviour of PTFE based gasket material [Communication écrite]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Non disponible

Marchand, L., Laviolette, D., Derenne, M., Birembaut, Y., & Ledauphin, T. (septembre 1996). Characterization of two different NPS bolted flanged joints subjected to external bending moments [Communication écrite]. 4ième colloque international sur l'étanchéité des assemblages boulonnés statiques avec joints CETIM, Mandelieu-La-Napoule, France. Non disponible

Derenne, M., Payne, J. R., & Marchand, L. (janvier 1996). Development of test procedures for fire resistance qualification of gaskets [Communication écrite]. Technical symposium of the fluid sealing association, Houston, Texas. Non disponible

Marchand, L., & Derenne, M. (juillet 1996). Long term performance of elastomeric sheet gasket materials subjected to temperature exposure [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible

Laviolette, D., Nica, A., Chaaban, A., Marchand, L., & Shirazi-Adl, A. (juillet 1996). Mechanical behavior of pressurized bolted joints subjected to external bending loads [Communication écrite]. 1996 8th International Conference on Pressure Vessel Technology, ICPVT-8, Montréal, Québec. Non disponible

Laviolette, D., Nica, A., Chaaban, A., Marchand, L., & Shirazi-Adl, A. (janvier 1996). Mechanical behaviour of pressurized bolted joints subjected to external bending loads [Communication écrite]. 8th Int. Conference on pressure wessel technology, Montréal, Québec. Non disponible

Derenne, M., Marchand, L., Payne, J. R., & Muzzo, U. (février 1995). Elevated temperature characterization of flexible, graphite sheet gasket materials [Communication écrite]. 1995 SAE International Congress and Exposition, Detroit, MI. Publié dans Sae-Papers, 13(2). Lien externe

Batista, P. P., Marchand, L., & Derenne, M. (juillet 1995). Proposed model for predicting leakage through porous gaskets [Communication écrite]. 1995 Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, HI, USA. Non disponible

Bazergui, A., Marchand, L., & Payne, J. R. (février 1989). The Aged Hot Tightness Test for Gaskets [Communication écrite]. SAE International Congress and Exposition. Publié dans SAE Technical Paper Series, 1. Lien externe

Chapitre de livre

Zhang, L. J., Zhang, L., Marchand, L., & Pierre, S. (2012). Integrated network architecture design for wireless systems. Dans Makaya, C., & Pierre, S. (édit.), Emerging wireless networks: concepts, techniques, and applications (p. 107-150). Lien externe

Zhang, L., Zhang, L., Marchand, L., & Pierre, S. (2011). A survey of IP layer mobility maangement protocols in next-generation wireless networks. Dans Next generation mobile networks and ubiquitous computing (p. 1-16). Lien externe

Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1998). PVRC/MTI technology for characterizatizing technology gasket used in bolted flanged connections. Dans Bickford, J. H. (édit.), Gaskets and gasketed joints (p. 137-302). Lien externe

Derenne, M., Payne, J. R., Marchand, L., & Bazergui, A. (1992). Development of Test Procedures For Fire Resistance Qualification of Gaskets. Dans Nau, B. S. (édit.), Fluid Sealing (p. 193-207). Lien externe

Marchand, L., Bazergui, A., & Derenne, M. (1992). Recent Developments In Elevated Temperature Gasket Evaluation. Dans Nau, B. S. (édit.), Fluid Sealing (p. 209-223). Lien externe

Liste produite: Fri Nov 22 03:58:45 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Marchand, Luc"

Aide

Article de revue

Communication écrite

Chapitre de livre