 | Monter d'un niveau |
David MélançonDépartement de génie mécanique
Voir sa fiche dans le Répertoire des Expertises de Polytechnique Montréal
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Liétard, Y., Therriault, D., & Mélançon, D. (2024). Exploiting Geometric Frustration in Coupled von Mises Trusses to Program Multifunctional Mechanical Metamaterials. Advanced Engineering Materials. Lien externe
Yang, Y., Read, H., Sbai, M., Zareei, A., Forte, A. E., Mélançon, D., & Bertoldi, K. (2024). Complex Deformation in Soft Cylindrical Structures via Programmable Sequential Instabilities. Advanced Materials, 202406611 (6 pages). Lien externe
Forte, A. E., Mélançon, D., Zanati, M., De Giorgi, M., & Bertoldi, K. (2023). Chiral mechanical metamaterials for tunable optical transmittance. Advanced Functional Materials, 33(20), 2214897 (7 pages). Lien externe
Mélançon, D., Forte, A. E., Kamp, L. M., Gorissen, B., & Bertoldi, K. (2022). Inflatable origami: Multimodal deformation via multistability. Advanced Functional Materials, 32(35), 2201891. Lien externe
Mhatre, S., Boatti, E., Mélançon, D., Zareei, A., Dupont, M., Bechthold, M., & Bertoldi, K. (2021). Deployable structures based on buckling of curved beams upon a rotational input. Advanced Functional Materials, 31(35), 2101144. Lien externe
Mélançon, D., Gorissen, B., García-Mora, C. J., Hoberman, C., & Bertoldi, K. (2021). Multistable inflatable origami structures at the metre scale. Nature, 592(7855), 545-550. Lien externe
Moussa, A., Mélançon, D., El Elmi, A., & Pasini, D. (2021). Topology optimization of imperfect lattice materials built with process-induced defects via powder bed fusion. Additive Manufacturing, 37, 101608. Lien externe
El Elmi, A., Mélançon, D., Asgari, M., Liu, L., & Pasini, D. (2020). Experimental and numerical investigation of selective laser melting-induced defects in Ti-6Al-4V octet truss lattice material: the role of material microstructure and morphological variations. Journal of Materials Research, 35(15), 1900-1912. Lien externe
Gorissen, B., Mélançon, D., Vasios, N., Torbati, M., & Bertoldi, K. (2020). Inflatable soft jumper inspired by shell snapping. Science Robotics, 5(42), eabb1967. Lien externe
Bagheri, Z. S., Mélançon, D., Liu, L., Johnston, R. B., & Pasini, D. (2017). Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials, 70, 17-27. Lien externe
Mélançon, D., Bagheri, Z. S., Johnston, R. B., Liu, L., Tanzer, M., & Pasini, D. (2017). Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants. Acta Biomaterialia, 63, 350-368. Lien externe
Boisneault, L. P. J. C., Audet, C., & Mélançon, D. (2024). Blackbox optimization for origami-inspired bistable structures. (Rapport technique n° G-2024-51). Lien externe
Mélançon, D., & Pasini, D. (octobre 2022). 3d-printing metal is hard : the role of manufacturing imperfections in the design of high-strength porous biomaterials to replace bone tissue [Communication écrite]. 3rd International Workshop on Reliability and Design of Additively Manufactured Materials (RdAMM2 2022), Belgrade, Serbia. Non disponible
Garon, J., Routier, A.-L., Mélançon, D., & Gosselin, F. (mai 2023). Morphogenesis through mechanical instabilities : wrinkles and ruffles formation during the growth of kelp blades [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe
Bray, D., Mélançon, D., & Bertoldi, K. (mars 2022). Exploring structural instabilities in ridge-reinforced soft cylinders [Résumé]. APS March Meeting 2022, Chicago, Ill.. Publié dans Bulletin of the American Physical Society, 67(3). Lien externe
Pernigoni, L., Farhadi, D., Mélançon, D., Grande, A., & Bertoldi, K. Multimodal locomotion via folding of a degree-four vertex [Résumé]. APS March Meeting Abstracts. Lien externe
Mélançon, D., Bertoldi, K., Gorissen, B., & Hoberman, C. Multistable inflatable origami structures at the meter-scale [Résumé]. APS March Meeting Abstracts. Lien externe
Gorissen, B., Mélançon, D., Vasios, N., Torbati, M., & Bertoldi, K. Energy release through volume snapping in soft inflatable actuators [Résumé]. APS March Meeting Abstracts. Lien externe
Mélançon, D., Hoberman, C., Gorissen, B., Garcia Mora, C., Yang, Y., Ku, J., Demaine, E., & Bertoldi, K. Inflatable origami-inspired structures [Résumé]. APS March Meeting Abstracts. Lien externe
Mélançon, D. (2022). Functionality through multistability: From deployable structures to soft robots [Thèse de doctorat, Harvard University]. Non disponible
Mélançon, D. (2017). Structural porous biomaterials to replace bone tissue design, manufacturing, and mechanical characterization [Mémoire de maîtrise, McGill University (Canada)]. Non disponible
