<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Mélançon, David"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Réseau de collaboration
Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement
Aller à : B | E | F | G | L | M | P | Y
Nombre de documents: 21

B

Boisneault, L. P. J. C., Audet, C., & Mélançon, D. (2024). Blackbox optimization for origami-inspired bistable structures. (Rapport technique n° G-2024-51). Lien externe

Bray, D., Mélançon, D., & Bertoldi, K. (mars 2022). Exploring structural instabilities in ridge-reinforced soft cylinders [Résumé]. APS March Meeting 2022, Chicago, Ill.. Publié dans Bulletin of the American Physical Society, 67(3). Lien externe

Bagheri, Z. S., Mélançon, D., Liu, L., Johnston, R. B., & Pasini, D. (2017). Compensation strategy to reduce geometry and mechanics mismatches in porous biomaterials built with selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials, 70, 17-27. Lien externe

E

El Elmi, A., Mélançon, D., Asgari, M., Liu, L., & Pasini, D. (2020). Experimental and numerical investigation of selective laser melting-induced defects in Ti-6Al-4V octet truss lattice material: the role of material microstructure and morphological variations. Journal of Materials Research, 35(15), 1900-1912. Lien externe

F

Forte, A. E., Mélançon, D., Zanati, M., De Giorgi, M., & Bertoldi, K. (2023). Chiral mechanical metamaterials for tunable optical transmittance. Advanced Functional Materials, 33(20), 2214897 (7 pages). Lien externe

G

Garon, J., Routier, A.-L., Mélançon, D., & Gosselin, F. (mai 2023). Morphogenesis through mechanical instabilities : wrinkles and ruffles formation during the growth of kelp blades [Résumé]. Canadian Society for Mechanical Engineering (CSME) / Computational Fluid Dynamics Society of Canada (CFD Canada). International congress, Sherbrooke, Qc, Canada. Publié dans Progress in Canadian Mechanical Engineering, 6. Lien externe

Gorissen, B., Mélançon, D., Vasios, N., Torbati, M., & Bertoldi, K. (2020). Inflatable soft jumper inspired by shell snapping. Science Robotics, 5(42), eabb1967. Lien externe

Gorissen, B., Mélançon, D., Vasios, N., Torbati, M., & Bertoldi, K. Energy release through volume snapping in soft inflatable actuators [Résumé]. APS March Meeting Abstracts. Lien externe

L

Liétard, Y., Therriault, D., & Mélançon, D. (2024). Exploiting Geometric Frustration in Coupled von Mises Trusses to Program Multifunctional Mechanical Metamaterials. Advanced Engineering Materials. Lien externe

M

Mélançon, D., & Pasini, D. (octobre 2022). 3d-printing metal is hard : the role of manufacturing imperfections in the design of high-strength porous biomaterials to replace bone tissue [Communication écrite]. 3rd International Workshop on Reliability and Design of Additively Manufactured Materials (RdAMM2 2022), Belgrade, Serbia. Non disponible

Mélançon, D. (2022). Functionality through multistability: From deployable structures to soft robots [Thèse de doctorat, Harvard University]. Non disponible

Mélançon, D., Forte, A. E., Kamp, L. M., Gorissen, B., & Bertoldi, K. (2022). Inflatable origami: Multimodal deformation via multistability. Advanced Functional Materials, 32(35), 2201891. Lien externe

Mhatre, S., Boatti, E., Mélançon, D., Zareei, A., Dupont, M., Bechthold, M., & Bertoldi, K. (2021). Deployable structures based on buckling of curved beams upon a rotational input. Advanced Functional Materials, 31(35), 2101144. Lien externe

Mélançon, D., Bertoldi, K., Gorissen, B., & Hoberman, C. Multistable inflatable origami structures at the meter-scale [Résumé]. APS March Meeting Abstracts. Lien externe

Mélançon, D., Gorissen, B., García-Mora, C. J., Hoberman, C., & Bertoldi, K. (2021). Multistable inflatable origami structures at the metre scale. Nature, 592(7855), 545-550. Lien externe

Moussa, A., Mélançon, D., El Elmi, A., & Pasini, D. (2021). Topology optimization of imperfect lattice materials built with process-induced defects via powder bed fusion. Additive Manufacturing, 37, 101608. Lien externe

Mélançon, D., Hoberman, C., Gorissen, B., Garcia Mora, C., Yang, Y., Ku, J., Demaine, E., & Bertoldi, K. Inflatable origami-inspired structures [Résumé]. APS March Meeting Abstracts. Lien externe

Mélançon, D., Bagheri, Z. S., Johnston, R. B., Liu, L., Tanzer, M., & Pasini, D. (2017). Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants. Acta Biomaterialia, 63, 350-368. Lien externe

Mélançon, D. (2017). Structural porous biomaterials to replace bone tissue design, manufacturing, and mechanical characterization [Mémoire de maîtrise, McGill University (Canada)]. Non disponible

P

Pernigoni, L., Farhadi, D., Mélançon, D., Grande, A., & Bertoldi, K. Multimodal locomotion via folding of a degree-four vertex [Résumé]. APS March Meeting Abstracts. Lien externe

Y

Yang, Y., Read, H., Sbai, M., Zareei, A., Forte, A. E., Mélançon, D., & Bertoldi, K. (2024). Complex Deformation in Soft Cylindrical Structures via Programmable Sequential Instabilities. Advanced Materials, 202406611 (6 pages). Lien externe

Liste produite: Sun Jan 5 03:53:44 2025 EST.