Documents dont l'auteur est "Fisa, Bohuslav"

Grouper par: Auteurs ou autrices | Date de publication | Sous-type de document | Aucun groupement

Aller à : B | C | F | G | L | M | T

Nombre de documents: 28

B

Borazghi, H., Trudel-Boucher, D., Denault, J., & Fisa, B. (2008). Continuous Consolidation of Polypropylene/Glass Fibre Commingled Fabric. Polymers & Polymer Composites, 16(1), 1-8. Lien externe

Bélanger, B., Sanschagrin, B., & Fisa, B. (1997). Injection molding and properties of highly filled copper-polyamide 11 composites. Journal of Thermoplastic Composite Materials, 10(6), 532-542. Lien externe

C

Chtourou, H., Atarsia, A., & Fisa, B. (octobre 1999). Development of new vinyl ester resin systems for b-stage prepreg. I. Spectroscopic (ftir) and calorimetric (dsc) analysis [Communication écrite]. Polymer Composites '99, Québec, Canada. Non disponible

Chtourou, H., Atarsia, A., & Fisa, B. (1999). Prediction of Thermal and Fire Resistance of Phenolic Resins by Dynamic Tg Analysis. Journal of Reinforced Plastics and Composites, 18(4), 339-345. Lien externe

Chtourou, H., Atarsia, A., & Fisa, B. (avril 1998). Prediction of thermal and fire resistance of phenolic resins by dynamic tg analysis [Communication écrite]. Antec '98. Volume II, Atlanta, Ga.. Lien externe

F

Fisa, B., & Meddad, A. (1999). Weldlines. Polypropylene: An A-Z Reference, 2, 8-8. Lien externe

Fisa, B., & Gundjian, M. (1997). Factors affecting adhesion at copper-polyamide 11 andaluminum-polyamide 11 interfaces. Journal of Thermoplastic Composite Materials, 10(5), 416-434. Lien externe

Fellahi, S., Favis, B. D., & Fisa, B. (1996). Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends. Polymer, 37(13), 2615-2626. Lien externe

Fellahi, S., Favis, B. D., & Fisa, B. (1995). Tensile dilatometry of injection-moulded HDPE/PA6 blends. Journal of Materials Science, 30(21), 5522-5530. Lien externe

Fellahi, S., Fisa, B., & Favis, B. D. (1995). Weldline strength in injection molded HDPE/PA6 blends: influence of interfacial modification. Journal of Applied Polymer Science, 57(11), 1319-1332. Lien externe

Fellahi, S., Meddad, A., Fisa, B., & Favis, B. D. (1995). Weldlines in injection-molded parts: a review. Advances in Polymer Technology, 14(3), 169-195. Lien externe

Fellahi, S., Favis, B. D., & Fisa, B. (mai 1994). Tensile dilatometry of injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible

Fellahi, S., Fisa, B., & Favis, B. D. (mai 1994). Weldline strength evaluation in injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible

G

Gundjian, M., & Fisa, B. (1997). Adhesion at copper-polyamide 11-copper and aluminum-polyamide 11-aluminum laminate interfaces: Influence of metal surface oxidation. Journal of Adhesion Science and Technology, 11(6), 759-781. Lien externe

Gauvin, R., Kerachni, A., & Fisa, B. (1994). Variation of mat surface density and its effect on permeability evaluation for RTM modelling. Journal of Reinforced Plastics and Composites, 13(4), 371-383. Lien externe

L

Lévesque, M., Gilchrist, M. D., & Fisa, B. (2003). A Theoretical study of the tensile test for highly anisotropic composite materials. Dans International, A. S. T. M. (édit.), ASTM Special Technical Publication (p. 320-335). Lien externe

M

Meddad, A., & Fisa, B. (juillet 1997). Damage development in filled viscoelastic matrix composites [Communication écrite]. 11th International Conference on Composite Materials, Gold Coast, Australia. Lien externe

Meddad, A., & Fisa, B. (1997). Filler-matrix debonding in glass bead-filled polystyrene. Journal of Materials Science, 32(5), 1177-1185. Lien externe

Meddad, A., & Fisa, B. (1997). Model for filler-matrix debonding in glass-bead-filled viscoelastic polymers. Journal of Applied Polymer Science, 65(10), 2013-2024. Lien externe

Meddad, A., & Fisa, B. (1997). Stress-strain behavior and tensile dilatometry of glass bead-filled polypropylene and polyamide 6. Journal of Applied Polymer Science, 64(4), 653-665. Lien externe

Meddad, A., & Fisa, B. (1996). Effect of filler-matrix debonding on tensile behavior of glass-beads filled polystyrene (ps). Macromolecular Symposia, 108(1), 173-182. Lien externe

Meddad, A., & Fisa, B. (1995). Weldline strength in glass fiber reinforced polyamide 66. Polymer Engineering and Science, 35(11), 893-901. Lien externe

Meddad, A., Fellahi, S., Pinard, M., & Fisa, B. (mai 1994). Filler-matrix debonding monitored by tensile test [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible

Malik, T. M., Carreau, P. J., Lafleur, P., & Fisa, B. (1991). Effect of filler treatment on the rheological and mechanical properties of polyethylene composites. Chemical Engineering Communications, 105(1), 11-25. Lien externe

T

Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2006). Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics. Composites Science and Technology, 66(3-4), 555-570. Lien externe

Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2005). Thermoforming complex parts from unconsolidated and consolidated polypropylene/glass fibre fabrics. Polymers and Polymer Composites, 13(6), 543-558. Lien externe

Trudel-Boucher, D., Bureau, M. N., Denault, J., & Fisa, B. (2003). Low-Velocity Impacts in Continuous Glass Fiber/Polypropylene Composites. Polymer Composites, 24(4), 499-511. Lien externe

Trudel-Boucher, D., Bureau, M. N., Denault, J., & Fisa, B. Low-velocity impacts in continuous glass fiber/polypropylene composites [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe

Liste produite: Thu Nov 21 05:08:57 2024 EST.

Pour citer ou exporter	Atom RSS 1.0 RSS 2.0

Documents dont l'auteur est "Fisa, Bohuslav"

Aide

B

C

F

G

L

M

T