 | Monter d'un niveau |
Réseau de collaborationCe graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Trudel‐Boucher, D., Bureau, M., Denault, J., & Fisa, B. (2020). Low-Velocity Impact Response of a Continuous Glass Fiber/Polypropylene Composite. Dans Hoa, S. V. (édit.), CANCOM 2001 Proceedings of the 3rd Canadian International Conference on Composites (p. 517-524). Lien externe
Borazghi, H., Trudel-Boucher, D., Denault, J., & Fisa, B. (2008). Continuous Consolidation of Polypropylene/Glass Fibre Commingled Fabric. Polymers & Polymer Composites, 16(1), 1-8. Lien externe
Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2006). Experimental investigation of stamp forming of unconsolidated commingled E-glass/polypropylene fabrics. Composites Science and Technology, 66(3-4), 555-570. Lien externe
Trudel-Boucher, D., Fisa, B., Denault, J., & Gagnon, P. (2005). Thermoforming complex parts from unconsolidated and consolidated polypropylene/glass fibre fabrics. Polymers and Polymer Composites, 13(6), 543-558. Lien externe
Trudel-Boucher, D., Bureau, M. N., Denault, J., & Fisa, B. (2003). Low-Velocity Impacts in Continuous Glass Fiber/Polypropylene Composites. Polymer Composites, 24(4), 499-511. Lien externe
Lévesque, M., Gilchrist, M. D., & Fisa, B. (2003). A Theoretical study of the tensile test for highly anisotropic composite materials. Dans International, A. S. T. M. (édit.), ASTM Special Technical Publication (p. 320-335). Lien externe
Trudel-Boucher, D., Bureau, M. N., Denault, J., & Fisa, B. Low-velocity impacts in continuous glass fiber/polypropylene composites [Communication écrite]. ANTEC : Annual Technical Conference - Society of Plastics Engineers. Lien externe
Chtourou, H., Atarsia, A., & Fisa, B. (octobre 1999). Development of new vinyl ester resin systems for b-stage prepreg. I. Spectroscopic (ftir) and calorimetric (dsc) analysis [Communication écrite]. Polymer Composites '99, Québec, Canada. Non disponible
Chtourou, H., Atarsia, A., & Fisa, B. (1999). Prediction of Thermal and Fire Resistance of Phenolic Resins by Dynamic Tg Analysis. Journal of Reinforced Plastics and Composites, 18(4), 339-345. Lien externe
Fisa, B., & Meddad, A. (1999). Weldlines. Polypropylene: An A-Z Reference, 2, 8-8. Lien externe
Chtourou, H., Atarsia, A., & Fisa, B. (avril 1998). Prediction of thermal and fire resistance of phenolic resins by dynamic tg analysis [Communication écrite]. Antec '98. Volume II, Atlanta, Ga.. Lien externe
Gundjian, M., & Fisa, B. (1997). Adhesion at copper-polyamide 11-copper and aluminum-polyamide 11-aluminum laminate interfaces: Influence of metal surface oxidation. Journal of Adhesion Science and Technology, 11(6), 759-781. Lien externe
Meddad, A., & Fisa, B. (juillet 1997). Damage development in filled viscoelastic matrix composites [Communication écrite]. 11th International Conference on Composite Materials, Gold Coast, Australia. Lien externe
Fisa, B., & Gundjian, M. (1997). Factors affecting adhesion at copper-polyamide 11 andaluminum-polyamide 11 interfaces. Journal of Thermoplastic Composite Materials, 10(5), 416-434. Lien externe
Meddad, A., & Fisa, B. (1997). Filler-matrix debonding in glass bead-filled polystyrene. Journal of Materials Science, 32(5), 1177-1185. Lien externe
Bélanger, B., Sanschagrin, B., & Fisa, B. (1997). Injection molding and properties of highly filled copper-polyamide 11 composites. Journal of Thermoplastic Composite Materials, 10(6), 532-542. Lien externe
Meddad, A., & Fisa, B. (1997). Model for filler-matrix debonding in glass-bead-filled viscoelastic polymers. Journal of Applied Polymer Science, 65(10), 2013-2024. Lien externe
Meddad, A., & Fisa, B. (1997). Stress-strain behavior and tensile dilatometry of glass bead-filled polypropylene and polyamide 6. Journal of Applied Polymer Science, 64(4), 653-665. Lien externe
Meddad, A., & Fisa, B. (1996). Effect of filler-matrix debonding on tensile behavior of glass-beads filled polystyrene (ps). Macromolecular Symposia, 108(1), 173-182. Lien externe
Fellahi, S., Favis, B. D., & Fisa, B. (1996). Morphological stability in injection-moulded high-density polyethylene/polyamide-6 blends. Polymer, 37(13), 2615-2626. Lien externe
Fellahi, S., Favis, B. D., & Fisa, B. (1995). Tensile dilatometry of injection-moulded HDPE/PA6 blends. Journal of Materials Science, 30(21), 5522-5530. Lien externe
Meddad, A., & Fisa, B. (1995). Weldline strength in glass fiber reinforced polyamide 66. Polymer Engineering and Science, 35(11), 893-901. Lien externe
Fellahi, S., Fisa, B., & Favis, B. D. (1995). Weldline strength in injection molded HDPE/PA6 blends: influence of interfacial modification. Journal of Applied Polymer Science, 57(11), 1319-1332. Lien externe
Fellahi, S., Meddad, A., Fisa, B., & Favis, B. D. (1995). Weldlines in injection-molded parts: a review. Advances in Polymer Technology, 14(3), 169-195. Lien externe
Meddad, A., Fellahi, S., Pinard, M., & Fisa, B. (mai 1994). Filler-matrix debonding monitored by tensile test [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Fellahi, S., Favis, B. D., & Fisa, B. (mai 1994). Tensile dilatometry of injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Gauvin, R., Kerachni, A., & Fisa, B. (1994). Variation of mat surface density and its effect on permeability evaluation for RTM modelling. Journal of Reinforced Plastics and Composites, 13(4), 371-383. Lien externe
Fellahi, S., Fisa, B., & Favis, B. D. (mai 1994). Weldline strength evaluation in injection molded HDPE/PA6 blends [Communication écrite]. 52nd Annual Technical Conference ANTEC 94, San Francisco, CA, USA. Non disponible
Malik, T. M., Carreau, P. J., Lafleur, P., & Fisa, B. (1991). Effect of filler treatment on the rheological and mechanical properties of polyethylene composites. Chemical Engineering Communications, 105(1), 11-25. Lien externe
