Monter d'un niveau |
Abbasi, S., Derdouri, A., & Carreau, P. (2014). Carbon nanotube conductive networks through the double percolation concept in polymer systems. International Polymer Processing, 29(1), 13-27. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (2011). Properties of microinjection molding of polymer multiwalled carbon nanotube conducting composites. Polymer Engineering and Science, 51(5), 992-1003. Lien externe
Abbasi, S., Carreau, P., & Derdouri, A. (2010). Flow induced orientation of multiwalled carbon nanotubes in polycarbonate nanocomposites: Rheology, conductivity and mechanical properties. Polymer, 51(4), 922-935. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2009). Effect of crystalline structure on morphology and properties of MWCNT nanocomposites [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2009), Chicago, IL, United states. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (août 2009). Effect of nanotube alignment on the morphology and properties of Polycarbonate/MWCNT nanocomposites [Communication écrite]. 8th World Congress of Chemical Engineering, Montréal, Québec. Non disponible
Musa, K., Chu, J., Derdouri, A., & Hrymak, A. (juin 2009). The morphology of micro-injection molded polyoxymethyulene [Communication écrite]. 67th Annual Technical Conference of the Society of Plastics Engineers, Chicago, IL, United states. Non disponible
Carreau, P., Abbasi, S., & Derdouri, A. (octobre 2009). Rheological properties and percolation behavior of polypropylene/multiwalled carbon nanotube composites [Communication écrite]. 81st Annual Meeting of the Society of Rheology, Madison, WI, USA. Lien externe
Rhode, M., Derdouri, A., & Kamal, M. R. (2009). Rheological Properties and Percolation in Suspensions of Multiwalled Carbon Nanotubes in Polycarbonate. International Polymer Processing, 24(3). Non disponible
Abbasi, S., Carreau, P., Derdouri, A., & Moan, M. (2009). Rheological Properties and Percolation in Suspensions of Multiwalled Carbon Nanotubes in Polycarbonate. Rheologica Acta, 48(9), 943-959. Lien externe
Abbasi, S., Derdouri, A., & Carreau, P. (juin 2008). Morphological electrical and mechanical properties of PC/MWCNT composites in different microinjection molding conditions [Communication écrite]. 24th Annual Meeting of the Polymer Processing society, Salerno, Italy. Non disponible
Abbasi, S., Leelapornpisit, W., Derdouri, A., & Carreau, P. (mai 2008). Morphology and properties of microinjected polycarbonate/MWCNT nanocomposites [Communication écrite]. 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at ANTEC 2008. Non disponible
Abbasi, S., Derdouri, A., & Carreau, P. (août 2008). Rheology, morphology and temperature dependency of nanotube networks in polycarbonate/multiwalled carbon nanotube composites [Communication écrite]. 15th International Congress on Rheology, Monterey, CA. Lien externe
Boucekine, Y., Sanschagrin, B., & Derdouri, A. (mai 2006). Investigation of re-crystallization of injection molded TPO unpainted plaques [Communication écrite]. ANTEC 2006, Charlotte, NC, United States. Lien externe
Messaoud, D. A., Sanschagrin, B., & Derdouri, A. (2005). Study on mechanical properties and material distribution of sandwich plaques molded by co-injection. Polymer Composites, 26(3), 265-275. Lien externe