<  Retour au portail Polytechnique Montréal

Documents dont l'auteur est "Corthésy, Robert"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Nombre de documents: 48

Corthésy, R., & Leite, M.-H. (juin 2017). Transient curve analysis for stress measurements involving progressive rock failure [Communication écrite]. Progressive Rock Failure Conference (PRF 2017), Ascona, Switzerland (4 pages). Non disponible

Yaméogo, S. T., Corthésy, R., & Leite, M.-H. (2013). Influence of local heterogeneity on Doorstopper stress measurements. International Journal of Rock Mechanics and Mining Sciences, 60, 288-300. Lien externe

Yaméogo, S. T., Corthésy, R., & Leite, M.-H. (2013). Influence of rock failure and damage on in situ stress measurements in brittle rock. International Journal of Rock Mechanics and Mining Sciences, 61, 118-129. Lien externe

Gravel, C., Corthésy, R., & Leite, M.-H. (octobre 2012). Modélisation numérique des contraintes in situ pour la conception des tunnels sous pression non blindés [Communication écrite]. TAC Conference, Montréal, Québec. Non disponible

Leite, M.-H., Corthésy, R., & Boivin, V. (février 2011). Improving rock stress measurements using stochastic numerical modeling of heterogeneity [Communication écrite]. 2nd International FLAC/DEM Symposium, Melbourne, Victoria, Australia. Non disponible

Corthésy, R., & Leite, M.-H. (août 2010). Detecting non elastic behavior from strain recovery curves. Rock stress and earthquakes [Communication écrite]. 5th International Symposium In-Situ Rock Stress, Beijing, Chine. Lien externe

Leite, M.-H., Boivin, V., & Corthésy, R. (2010). Stress calculation methods for overcoring techniques in heterogeneous rocks. International Journal of Rock Mechanics and Mining Sciences, 47(7), 1180-1192. Lien externe

Gonzaga, G. G., Leite, M.-H., & Corthésy, R. (2008). Determination of Anisotropic Deformability Parameters From a Single Standard Rock Specimen. International Journal of Rock Mechanics and Mining Sciences, 45(8), 1420-1438. Lien externe

Corthésy, R., & Leite, M.-H. (2008). A Strain-Softening Numerical Model of Core Discing and Damage. International Journal of Rock Mechanics and Mining Sciences, 45(3), 329-350. Lien externe

Gill, D., Corthésy, R., & Leite, M.-H. (2005). Determining the Minimal Number of Specimens for Laboratory Testing of Rock Properties. Engineering Geology, 78(1-2), 29-51. Lien externe

Gill, D., Corthésy, R., & Leite, M.-H. (2005). A statistical approach for determining practical rock strength and deformability values from laboratory tests. Engineering Geology, 78(1-2), 53-67. Lien externe

Antonov, D., Corthésy, R., & Leite, M.-H. (juin 2005). Validation of FLAC3D numerical analyses for the design of retaining walls in backfilled underground openings [Communication écrite]. 11th International Conference of IACMAG, Turin, Italy. Non disponible

Gill, D. E., Corthésy, R., & Leite, M. H. (2003). Les valeurs pratiques des propriétés mécaniques des roches. (Rapport technique n° EPM-RT-2003-05). Disponible

Frenette, P., & Corthésy, R. Sill Pillar Design at the Niobec Mine Using Flac(3d) [Communication écrite]. Flac and Numerical Modeling in Geomechanics. Non disponible

Corthésy, R., Leite, M.-H., Gill, D. E., & Gaudin, B. (2003). Stress Measurements in Soft Rocks. Engineering Geology, 69(3-4), 381-397. Lien externe

Gill, D. E., Leite, M. H., & Corthésy, R. (2002). Les instabilités structurales : guide d'analyse par stéréographie et de calcul des ancrages. (Rapport technique n° EPM-RT-2002-05). Disponible

Corthésy, R., Leite, M.-H., & St-Cyr, C. (juillet 2001). Potential use of digital imaging for rock movement detection [Communication écrite]. 38th U.S. Symposium on Rock Mechanics (USRMS 2001), Washington, D.C.. Lien externe

Leite, M.-H., & Corthésy, R. (2001). Stress Measurements in Concrete Structures With Modified Doorstopper Technique. ACI Structural Journal, 98(5), 619-628. Lien externe

St-Cyr, C., Corthésy, R., & Leite, M.-H. (septembre 2000). Détection des mouvements aux parois excavations en rocher par imagerie numérique - Résultats préliminaires [Communication écrite]. 16th Annual Conference of the Tunnelling Association of Canada, Montréal, Québec. Non disponible

Corthésy, R., Leite, M.-H., Turpin, E., & Gaudin, B. Mesure de contraintes dans des roches tendres en Haute-Savoie [Communication écrite]. 53ieme Conférence canadienne de géotechnique, Montréal, Québec. Non disponible

Cabot, É., Leite, M.-H., Corthésy, R., & Thompson, P. (septembre 2000). Practical aspects related to rock stress determinations using the deep doorstopper gauge system (DDGS) [Communication écrite]. 16th Annual Conference of the Tunnelling Association of Canada, Montréal, Québec. Non disponible

Corthésy, R., Gill, D., Leite, M.-H., & He, G. (août 1999). Laboratory validation of the 3-D borehole slotter stress calculation model [Communication écrite]. 9e Congrès international de mécanique des roches, Paris, FRA. Non disponible

Kanduth, H., & Corthésy, R. (août 1999). Rock strain using a digital image analysis method [Communication écrite]. 9e Congrès international de mécanique des roches, Paris, FRA. Non disponible

Corthésy, R., He, G., Gill, D., & Leite, M.-H. (1999). A Stress Calculation Model for the 3D Borehole Slotter. International Journal of Rock Mechanics and Mining Sciences, 36(4), 493-508. Lien externe

Corthésy, R., Leite, M.-H., Gill, D., Basque, J. P., & Coulson, A. L. (juin 1999). Stress measurements in mine pillars using the RPR method [Communication écrite]. Rock mechanics for industry : 37th U.S. Rock mechanics symposium, Vail, Col, USA. Lien externe

Corthésy, R., Gill, D., & Leite, M.-H. (1998). Élaboration d'un modèle de prédiction des contraintes in-situ dans la région de la faille de Cadillac. CIM Bulletin, 91(1020), 54-58. Lien externe

Leite, M.-H., Gill, D., & Corthésy, R. (1998). Experimental and Numerical Evaluation of Stress Redistribution in Thick-Walled Rocksalt Cylinders. International Journal of Rock Mechanics and Mining Sciences, 35(3), 367-383. Lien externe

Leite, M.-H., Corthésy, R., Gill, D., & Nguyen, D. Un nouveau capteur pour la mesure de contraintes relatives et absolues [Communication écrite]. 5ième Colloque du CRIB, Sherbrooke. Non disponible

Corthésy, R., Gill, D. E., & Leite, M. H. (1997). Elaboration d'un modèle de prédiction des contraintes in-situ dans le Nord-Ouest Québécois. (Rapport technique n° EPM-RT-97-11). Accès restreint

Thompson, P. M., Corthésy, R., & Leite, M.-H. Rock stress determinations at great depth using the modified doorstopper gauge [Communication écrite]. International Symposium on Rock Stress, Kumamoto. Non disponible

Leite, M.-H., Corthésy, R., Gill, D., & Read, R. Some aspects of a stress calculation model for deep measurements using the modified doorstopper cell [Communication écrite]. International Symposium on Rock Stress, Kumamoto. Non disponible

Corthésy, R., Leite, M.-H., Gill, D., & Nguyen, D. Use of the modified doorstopper-IAM combination as a stress-meter [Communication écrite]. International Symposium on Rock Stress, Kumamoto. Non disponible

Corthésy, R., Leite, M. H., & Gill, D. E. (1996). Mesures des contraintes in-situ à la mine Kiena : projet IRSST. (Rapport technique n° EPM-RT-96-06). Disponible

Leite, M.-H., Corthésy, R., & Gill, D. (juin 1996). Field application of the RPR in situ stress calculation method [Communication écrite]. Rock mechanics, tools and techniques : 2nd North American Rock Mechanics Symposium, NARMS '96, Montréal, Québec. Non disponible

Leite, M.-H., Corthésy, R., Gill, D., St-Onge, M., & Don, N. (juin 1996). The IAM : A Down-the-hole conditioner/data logger for the modified doorstopper technique [Communication écrite]. Rock mechanics, tools and techniques : 2nd North American Rock Mechanics Symposium, NARMS '96, Montréal, Québec. Non disponible

Corthésy, R., Gill, D. E., & Leite, M. H. (1996). Mesures des contraintes in-situ à la mine Doyon projet IRSST. (Rapport technique n° EPM-RT-96-08). Accès restreint

Corthésy, R., Gill, D. E., & Leite, M. H. (1996). Mesures des contraintes in-situ à la Mine Francoeur, projet IRSST. (Rapport technique n° EPM-RT-96-09). Accès restreint

Corthésy, R., Leite, M. H., & Gill, D. E. (1996). Mesures des contraintes in-situ à la Mine Louvicourt, projet IRSST. (Rapport technique n° EPM-RT-96-07). Accès restreint

Leite, M.-H., Corthésy, R., & Gill, D. (juin 1995). Determination of deformability parameters on overcores in heterogeneous non linear anisotropic rocks [Communication écrite]. 35th U.S. Symposium on Rock Mechanics, (USRMS 1995), Reno, NV. Lien externe

He, G., Corthésy, R., Gill, D., Leite, M.-H., & Kanduth, H. Finite element analysis for the interpretation model of the 3D Borehole Slotter [Communication écrite]. 3rd Canadian Conference Computer Applications in the Mining Industry (CAMI'95). Non disponible

Leite, M.-H., Corthésy, R., Gill, D., & Beaupré, G. Reducing the use of cement in backfilled stopes [Communication écrite]. 3rd Canadian Conference Computer Applications in the Mining Industry (CAMI'95). Non disponible

Corthésy, R., Gill, D., Leite, M.-H., & Thompson, P. M. (1995). Stress measurements in high-stress zones using the modified doorstopper technique - reply. Canadian Geotechnical Journal, 32(2), 382-383. Lien externe

Corthésy, R., Gill, D., & Leite, M.-H. Un modèle de prédiction des contraintes dans le nord-ouest québécois [Communication écrite]. Conférence régionale de l'IRSST, Val D'or, Québec. Non disponible

Corthésy, R., Leite, M.-H., Gill, D., He, G., & Germain, P. (juin 1994). First application of the RPR method to field measurements [Communication écrite]. 1st North American Rock Mechanics Symposium (NARMS), Austin, Texas. Lien externe

Corthésy, R., Leite, M.-H., He, G., & Gill, D. (1994). The RPR method for the doorstopper technique: Four or six stress components from one or two boreholes. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 31(5), 507-516. Lien externe

Corthésy, R., Leite, M. H., Guang, H., & Gill, D. E. (1993). The RPR method for the doorstopper technique : four or six stress components from one or two boreholes. (Rapport technique n° EPM-RT-93-14). Accès restreint

Corthésy, R., & Gill, D. (septembre 1991). The influence of non linearity and anisotropy on stress measurement results [Communication écrite]. 7th International Society for Rock Mechanics and Rock Engineering Congress (ISRM 1991), Aachen, Germany. Lien externe

Kanduth, H. H., Corthésy, R., & Gill, D. (septembre 1991). Validation of borehole slotting as a method for in situ stress measurements [Communication écrite]. 7th International Society for Rock Mechanics and Rock Engineering Congress (ISRM 1991), Aachen, Germany. Lien externe

Liste produite: Fri Mar 29 03:55:17 2024 EDT.