<  Back to the Polytechnique Montréal portal

Items where Author is "Causse, Philippe"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Publication Date | Document subtype | No Grouping
Number of items: 22.

Article

Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages). External link

Sun, Y., Causse, P., & Trochu, F. (2022). Closure to "Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method" by Yixun Sun, Philippe Causse, Brahim Benmokrane, and Francois Trochu. Journal of Engineering Mechanics, 148(3), 07022002 (2 pages). External link

Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. External link

Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. External link

Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. External link

Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. External link

Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573. External link

Belot, I., Sun, Y., Vidal, D., Votsmeier, M., Causse, P., Trochu, F., & Bertrand, F. (2021). A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters. Chemical Engineering Journal, 405, 18 pages. External link

Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A dimensionless characteristic number for process selection and mold design in composites manufacturing : part I — theory. Journal of Composites Science, 4(1), 11 (16 pages). Available

Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A Dimensionless Characteristic Number for Process Selection and Mold Design in Composites Manufacturing: Part II-Applications. Journal of Composites Science, 4(1), 10 (17 pages). External link

Huang, W., Causse, P., Hu, H., & Trochu, F. (2020). Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins. Polymer Composites, 41(4), 1341-1355. External link

Sun, Y., Causse, P., Benmokrane, B., & Trochu, F. (2020). Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method. Journal of Engineering Mechanics, 146(9), 11 pages. External link

Huang, W., Huang, Q., Liu, Y., Yang, J., Hu, H., Trochu, F., & Causse, P. (2019). A Fourier based reduced model for wrinkling analysis of circular membranes. Computer Methods in Applied Mechanics and Engineering, 345, 1114-1137. External link

Madra, A., Causse, P., Trochu, F., Adrien, J., Maire, E., & Breitkopf, P. (2019). Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans. Composite Structures, 224, 11 pages. External link

Causse, P., Ravey, C., & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2). Available

Bonnard, B., Causse, P., & Trochu, F. (2017). Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials. Journal of Composite Materials, 51(27), 3807-3818. External link

Causse, P., Ruiz, E., & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913. External link

Paper

Yang, B., Wang, J., Causse, P., Béguin, C., & Trochu, F. (2023, July). On the Meso-structure Spatial Variability Characterizing and Geometric Modelling of Textile-Based Composite via Volume Imaging [Paper]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Unavailable

Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (2019, September). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Paper]. 38th IAHR World Congress, Panama City, Panama. External link

Trochu, F., & Causse, P. (2018, May). Combined characterization of pose size distribution and permeability in fibrous textiles by capillary flow porometry [Paper]. 14th International Conference on Flow Processes in Composite Materials, Kulturens Hus in Luleå, Sweden. Unavailable

Master's thesis

Causse, P. (2005). Modélisation et prédiction du comportement en fluage du polyéthylène haute densité [Master's thesis, École Polytechnique de Montréal]. Available

Ph.D. thesis

Causse, P. (2011). Développement et analyse du procédé d'injection flexible pour la mise en forme de pièces composites fortement courbées [Ph.D. thesis, École Polytechnique de Montréal]. Available

List generated on: Tue Oct 8 08:25:34 2024 EDT