 | Up a level |
Yang, B., Wang, J., Causse, P., Béguin, C., & Trochu, F. (2023, July). On the Meso-structure Spatial Variability Characterizing and Geometric Modelling of Textile-Based Composite via Volume Imaging [Paper]. 23rd International Conference on Composite Materials (ICCM 2023), Belfast, United kingdom. Unavailable
Yang, B., Sun, Y., Trochu, F., Béguin, C., Wang, J., & Causse, P. (2023). Performance Evaluation of Unidirectional Molds used for Measuring Saturated Transverse Permeability of Engineering Textiles. Composites Part A: Applied Science and Manufacturing, 169, 107524 (33 pages). External link
Sun, Y., Causse, P., & Trochu, F. (2022). Closure to "Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method" by Yixun Sun, Philippe Causse, Brahim Benmokrane, and Francois Trochu. Journal of Engineering Mechanics, 148(3), 07022002 (2 pages). External link
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part I—Theory. Transport in Porous Media, 143(2), 397-416. External link
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Convective Heat Transfer Between a Bead Packing and Its Bounding Wall: Part II-Numerical Analysis and Experimental Validation. Transport in Porous Media, 143(1), 1-22. External link
Sun, Y., Béguin, C., Causse, P., Benmokrane, B., & Trochu, F. (2022). Experimental and numerical investigation of wall temperature in a heated pipe filled with beads. International Journal of Heat and Mass Transfer, 192, 13 pages. External link
Yang, B., Huang, W., Causse, P., Béguin, C., Wang, J., & Trochu, F. (2022). On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding. Polymer Composites, 43(4), 2234-2251. External link
Grofti, Z., Croteau-Labouly, B., Boukhili, R., Causse, P., Belouettar, S., Perrin, H., & Trochu, F. (2022). Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion. Polymer Composites, 43(6), 3560-3573. External link
Belot, I., Sun, Y., Vidal, D., Votsmeier, M., Causse, P., Trochu, F., & Bertrand, F. (2021). A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters. Chemical Engineering Journal, 405, 18 pages. External link
Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A dimensionless characteristic number for process selection and mold design in composites manufacturing : part I — theory. Journal of Composites Science, 4(1), 11 (16 pages). Available
Di Fratta, C., Sun, Y., Causse, P., & Trochu, F. (2020). A Dimensionless Characteristic Number for Process Selection and Mold Design in Composites Manufacturing: Part II-Applications. Journal of Composites Science, 4(1), 10 (17 pages). External link
Huang, W., Causse, P., Hu, H., & Trochu, F. (2020). Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins. Polymer Composites, 41(4), 1341-1355. External link
Sun, Y., Causse, P., Benmokrane, B., & Trochu, F. (2020). Permeability Measurement of Granular Porous Materials by a Modified Falling-Head Method. Journal of Engineering Mechanics, 146(9), 11 pages. External link
Huang, W., Huang, Q., Liu, Y., Yang, J., Hu, H., Trochu, F., & Causse, P. (2019). A Fourier based reduced model for wrinkling analysis of circular membranes. Computer Methods in Applied Mechanics and Engineering, 345, 1114-1137. External link
Madra, A., Causse, P., Trochu, F., Adrien, J., Maire, E., & Breitkopf, P. (2019). Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans. Composite Structures, 224, 11 pages. External link
Anne, F., Béguin, C., Étienne, S., Causse, P., Scott, D., & Bornard, L. (2019, September). Void fraction and bubble size measurement inside clouds of air bubbles in flowing water [Paper]. 38th IAHR World Congress, Panama City, Panama. External link
Causse, P., Ravey, C., & Trochu, F. (2018). Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding. Journal of Composites Science, 2(2). Available
Trochu, F., & Causse, P. (2018, May). Combined characterization of pose size distribution and permeability in fibrous textiles by capillary flow porometry [Paper]. 14th International Conference on Flow Processes in Composite Materials, Kulturens Hus in Luleå, Sweden. Unavailable
Bonnard, B., Causse, P., & Trochu, F. (2017). Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials. Journal of Composite Materials, 51(27), 3807-3818. External link
Causse, P., Ruiz, E., & Trochu, F. (2012). Spring-in behavior of curved composites manufactured by Flexible Injection. Composites Part A: Applied Science and Manufacturing, 43(11), 1901-1913. External link
Causse, P. (2011). Développement et analyse du procédé d'injection flexible pour la mise en forme de pièces composites fortement courbées [Ph.D. thesis, École Polytechnique de Montréal]. Available
Causse, P. (2005). Modélisation et prédiction du comportement en fluage du polyéthylène haute densité [Master's thesis, École Polytechnique de Montréal]. Available
