Monter d'un niveau |
Ce graphique trace les liens entre tous les collaborateurs des publications de {} figurant sur cette page.
Chaque lien représente une collaboration sur la même publication. L'épaisseur du lien représente le nombre de collaborations.
Utilisez la molette de la souris ou les gestes de défilement pour zoomer à l'intérieur du graphique.
Vous pouvez cliquer sur les noeuds et les liens pour les mettre en surbrillance et déplacer les noeuds en les glissant.
Enfoncez la touche "Ctrl" ou la touche "⌘" en cliquant sur les noeuds pour ouvrir la liste des publications de cette personne.
Cacciari, P., Figueiredo, L. T., Gontijo, A., & Ribas, G. (avril 2024). Analyzing the strength of fractured and anisotropic rock masses : a comparative study of synthetic models and empirical approaches [Présentation]. Dans Slope Stability 2024, Belo Horizonte, Brazil (12 pages). Non disponible
Consoli, N. C., Carvalho, J. V. A., Wagner, A. C., Filho, H. C. S., Carvalho, I., Cacciari, P., & Silva, J. P. S. (2024). Determination of critical state line (CSL) for silty-sandy iron ore tailings subjected to low-high confining pressures. Journal of Rock Mechanics and Geotechnical Engineering, 16(5), 1684-1695. Disponible
Consoli, N. C., Silva, J. P. S., Wagner, A. C., Carvalho, J. V. A., Baudet, B. A., Coop, M. R., Filho, H. C. S., Carvalho, I., de Sousa, G. M., & Cacciari, P. (2023). Critical state analysis of two compacted filtered iron ore tailings with different gradings and mineralogy at different stages of treatment. Acta Geotechnica, 18 pages. Lien externe
Cacciari, P., & Futai, M. M. (2022). A practical method for estimating the volumetric intensity of non-persistent discontinuities on rock exposures. Rock Mechanics and Rock Engineering, 55(10), 6063-6078. Lien externe
Cacciari, P., & Futai, M. M. (2021). The influence of fresh and weathered rock foliation on the stability of the Monte Seco Tunnel. Rock Mechanics and Rock Engineering, 54(2), 537-558. Lien externe
Cacciari, P., & Futai, M. M. (2019). Effects of mica content on rock foliation strength. International Journal of Rock Mechanics and Mining Sciences, 124, 17 pages. Lien externe
Cacciari, P., & Futai, M. M. (septembre 2019). Integrating terrestrial laser scanning and discrete fracture networks for tunnel modeling in fractured rock masses [Communication écrite]. 14th International Congress on Rocks Mechanics and Rock Engineering, Foz do Iguassu, Brazil. Non disponible
Cacciari, P., & Futai, M. M. (2018). Assessing the tensile strength of rocks and geological discontinuities via pull-off tests. International Journal of Rock Mechanics and Mining Sciences, 105, 44-52. Lien externe
Cacciari, P., Vizini, V. O. S., & Futai, M. M. (juin 2018). The pull-off test for obtaining the tensile strength of rock materials [Communication écrite]. 52nd U.S. Rock Mechanics/Geomechanics Symposium, Seattle, Washington, USA. Non disponible
Cacciari, P., & Futai, M. M. (2017). Modeling a shallow rock tunnel using terrestrial laser scanning and discrete fracture networks. Rock Mechanics and Rock Engineering, 50(5), 1217-1242. Lien externe
Cacciari, P., & Futai, M. M. (octobre 2016). Integrating terrestrial laser scanning and discrete fracture networks approaches for tunnel modelling in fractured rock masses [Communication écrite]. 7th Brazilian Symposium on Rock Mechanics (SBMR 2016), Belo Horizonte, Brazil. Non disponible
Cantarella, V., Monticeli, J. P., Cacciari, P., & Futai, M. M. (octobre 2016). JRC estimation with 3D laser scanner images. In: VII Simpósio Brasileiro de Mecânica das Rochas, 2016, Belo Horizonte. [Communication écrite]. 7th Brazilian Symposium on Rock Mechanics (SBMR 2016), Belo Horizonte, Brazil. Non disponible
Cacciari, P., & Futai, M. M. (2016). Mapping and characterization of rock discontinuities in a tunnel using 3D terrestrial laser scanning. Bulletin of Engineering Geology and the Environment, 75(1), 223-237. Lien externe
Cacciari, P., Morikawa, D. S., & Futai, M. M. (novembre 2015). Modelling a railway rock tunnel using terrestrial laser scanning and the distinct element method [Communication écrite]. 8th South American Congress on Rock Mechanics, Buenos Aires, Argentina. Non disponible
Cepeda, A. A., Cacciari, P., Suzuki, S., & Futai, M. M. (mai 2014). A block fall study using the finite element method [Communication écrite]. 40th ITA-AITES annual general assembly, Iguassu Falls, Brazil. Non disponible
Cacciari, P., & Futai, M. M. (septembre 2014). Mapping geological discontinuities in tunnels using images generated by a 3D laser scanner [Mapeamento de descontinuidades geológicas em túneis utilizando imagens geradas por Scanner a Laser 3D]. [Communication écrite]. 6th Brazilian Symposium on Rock Mechanics (SBMR 2014), Goiânia, Brazil (8 pages). Non disponible
Farahani, B. V., Barros, F., Sousa, P. J., Cacciari, P., Tavares, P. J., Futai, M. M., & Moreira, P. (2019). A coupled 3D laser scanning and digital image correlation system for geometry acquisition and deformation monitoring of a railway tunnel. Tunnelling and Underground Space Technology, 91, 13 pages. Lien externe
Monticeli, J. P., Sigolo, J. B., Futai, M. M., & Cacciari, P. (octobre 2016). O uso da análise petrográfica e micromorfológica na determinação dos graus de alteração de um maciço rochoso gnáissico [Communication écrite]. 7th Brazilian Symposium on Rock Mechanics (SBMR 2016), Belo Horizonte, Brazil. Non disponible
Monticelli, J. P., Catarella, V., Cacciari, P., & Futai, M. M. (novembre 2015). Roughness characterization of discontinuity sets by profilometer and scanner images [Communication écrite]. 8th South American Congress on Rock Mechanics, Buenos Aires, Argentina. Non disponible
Monticeli, J. P., Cacciari, P., Suzuki, S., & Futai, M. M. (septembre 2014). Comparative study of the probability of collapse of falling blocks in tunnel excavated in rock [Correlação entre índice físicos e análise petrográfica na determinação do grau de alteração de um gnaisse]. [Communication écrite]. 17th Brazilian Congress of Soils Mechanics and Geotechnical Engineering (COBRAMSEG 2014), Goiânia-GO, Brazil (8 pages). Non disponible
Nardelli, A., Cacciari, P., & Futai, M. M. (2019). Sand–concrete interface response: The role of surface texture and confinement conditions. Soils and Foundations, 59(6), 1675-1694. Lien externe
Nardelli, A., Cacciari, P., & Futai, M. M. Resistência da interface areia-concreto [Communication écrite]. XIX Congresso Brasileiro de Mecânica dos Solos e Engenharia Geotécnica, Salvator. Non disponible
Ribas, G. P., Gontijo, A. A., Matos, A. R., Gomes, L. J., da Silva, J. E., de Azevedo Barros, M. B., & Cacciari, P. (juin 2023). Workflow for Discontinuity Set Characterization in Rock Masses Using 3D Digital Outcrop Models Derived from UAV Survey in an Iron Ore Mine Slope [Communication écrite]. 57th U.S. Rock Mechanics/Geomechanics Symposium, Atlanta, Georgia, USA. Publié dans All Days. Lien externe
Rasmussen, L. L., Cacciari, P., Futai, M. M., De Farias, M. M., & Assis, A. P. (2019). Efficient 3D probabilistic stability analysis of rock tunnels using a Lattice Model and cloud computing. Tunnelling and Underground Space Technology, 85, 282-293. Lien externe
Silva, J. P. S., Carvalho, J. V. A., Wagner, A. C., Cacciari, P., & Consoli, N. C. (2023). On the mechanics of filtered compacted consolidated and overconsolidated iron ore tailings at high pressures. Canadian Geotechnical Journal, 7 pages. Lien externe
Silva, J. P. S., Cacciari, P., Jefferies, M., Ribeiro, L. F. M., & Assis, A. P. (2022). Behavioural analysis of iron ore tailings through critical state soil mechanics. Soils and Rocks, 45(2), 13 pages. Lien externe
Silva, J. P. S., Cacciari, P., Ribeiro, L. F. M., & Jefferies, M. (2022). Influence of compaction on small-strain shear modulus of iron ore tailings. Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, 175(2), 247-260. Lien externe
Villalobos, S., Cacciari, P., & Futai, M. M. (2020). Evaluación de la estabilidad alrededor de un túnel ferroviario usando los datos de un escáner láser y el análisis de elementos finitos. Revista ingeniería de construcción, 35(1), 21-33. Lien externe
Vizini, V. O. S., Cacciari, P., & Futai, M. M. (2020). Numerical assessment of factors influencing the tensile strength of rocks via pull-off test. International Journal of Geomechanics, 20(7), 9 pages. Lien externe
Viana, C. D., Montincelli, J. P., Carvalho, C. H. G., Futai, M. M., Garcia, G. P. B., Albuquerque, R. W., & Cacciari, P. (septembre 2019). Slope stability assessment based on a digital outcrop model : a case-study at Jardim Garcia quarry [Communication écrite]. 14th International Congress on Rocks Mechanics and Rock Engineering, Foz do Iguassu, Brazil. Non disponible
Villalobos, S., Cacciari, P., & Futai, M. M. (2017). Modelamiento numérico de la formación e inestabilidad de bloques alrededor del túnel Monte Seco excavado en un macizo rocoso discontinuo. Works and Project, 21(21), 54-64. Lien externe
Villalobos, S., Cacciari, P., & Futai, M. M. (janvier 2017). Statistical-based generation of joint systems to stability analysis of tunnels in discontinuous rock mass [Communication écrite]. 4th Brazilian Congress on Tunnels and Underground Structures and International Seminar, Sao Paulo, Brazil. Non disponible
Wagner, A. C., Silva, J. P. S., Carvalho, J. V. A., Rissoli, A. L. C., Cacciari, P., Chaves, H. M., Filho, H. C. S., & Consoli, N. C. (2023). Mechanical behavior of iron ore tailings under standard compression and extension triaxial stress paths. Journal of Rock Mechanics and Geotechnical Engineering, 15(7), 1883-1894. Disponible