 | Monter d'un niveau |
Morali, A., Mandal, A., Skorobogatiy, M. A., & Bodkhe, S. (2023). Unleashing the piezoelectric potential of PVDF: a study on phase transformation from gamma (γ) to beta (β) phase through thermal contact poling. RSC Advances, 13(44), 31234-31242. Disponible
Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Antenna for 5G Sub-6-GHz and mm-Wave Bands. IEEE Open Journal of Antennas and Propagation, 4, 614-625. Disponible
Mandal, A., Morali, A., Skorobogatiy, M. A., & Bodkhe, S. (2023). 3D Printing of Polyvinylidene Fluoride-Based Piezoelectric Sensors for Noninvasive Continuous Blood Pressure Monitoring. Advanced Engineering Materials, 10 pages. Lien externe
Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A 3D-printed Encapsulated Dual Wide-Band Dielectric Resonator Antenna with Beam Switching Capability. IEEE Open Journal of Antennas and Propagation, 4, 492-505. Lien externe
Testoni, O., Bodkhe, S., Bergamini, A., & Ermanni, P. (2023). Network of selectively compliant actuators based on shape memory alloys and polymers for a reconfigurable sandwich panel. Journal of Intelligent Material Systems and Structures, 34(3), 341-351. Lien externe
Kuthe, S., Schlothauer, A., Bodkhe, S., Hulme, C., & Ermanni, P. (2022). 3D printed mechanically representative aortic model made of gelatin fiber reinforced silicone composite. Materials Letters, 320, 4 pages. Lien externe
Testoni, O., Christen, S., Bodkhe, S., Bergamini, A., & Ermanni, P. (2022). A novel concept of modular shape-adaptable sandwich panel with distributed actuation based on shape memory alloys. Journal of Intelligent Material Systems and Structures, 33(11), 1439-1448. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022). Tunable thermally bistable multi-material structure. Applied Materials Today, 28, 101529 (14 pages). Lien externe
Testoni, O., Lumpe, T., Huang, J.-L., Wagner, M., Bodkhe, S., Zhakypov, Z., Spolenak, R., Paik, J., Ermanni, P., Muñoz, L., & Shea, K. (2021). A 4D printed active compliant hinge for potential space applications using shape memory alloys and polymers. Smart Materials and Structures, 30(8), 13 pages. Lien externe
Bodkhe, S., & Ermanni, P. (2020). 3D printing of multifunctional materials for sensing and actuation: Merging piezoelectricity with shape memory. European Polymer Journal, 132, 8 pages. Lien externe
Bodkhe, S., Vigo, L., Zhu, S., Testoni, O., Aegerter, N., & Ermanni, P. (2020). 3D printing to integrate actuators into composites. Additive Manufacturing, 35, 8 pages. Lien externe
Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2020). A novel concept for adaptive friction damper based on electrostatic adhesion. Smart Materials and Structures, 29(10), 10 pages. Lien externe
Bodkhe, S., & Ermanni, P. (2019). Challenges in 3D printing of piezoelectric materials. Multifunctional Materials, 2(2), 27 pages. Lien externe
Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2019). Smart material based mechanical switch concepts for the variation of connectivity in the core of shape-adaptable sandwich panels. Smart Materials and Structures, 28(2), 11 pages. Lien externe
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). Lien externe
Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. Lien externe
Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Disponible
Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Mac Murray, B. C., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017). Click chemistry stereolithography for soft robots that self-heal. Journal of Materials Chemistry B, 5(31), 6249-6255. Lien externe
Bodkhe, S., Rajesh, P.S.M., Kamle, S., & Verma, V. (2014). Beta-phase enhancement in polyvinylidene fluoride through filler addition: Comparing cellulose with carbon nanotubes and clay. Journal of Polymer Research, 21(5), 11 pages. Lien externe
Rajesh, P. S. M., Bodkhe, S., Kamle, S., & Verma, V. (2014). Enhancing beta-phase in PVDF through physicochemical modification of cellulose. Electronic Materials Letters, 10(1), 315-319. Lien externe
Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (juillet 2022). Additively manufactured thermally bistable structures [Communication écrite]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. Lien externe
Testoni, O., Bodkhe, S., Ermanni, P., & Bergamini, A. (septembre 2020). Mechanical Characterization of a Novel Concept of Adaptive Electrostatic Friction Damper [Communication écrite]. Conference on Smart Materials, Adaptive Structures and Intelligent Systems (ASME 2020) (7 pages). Lien externe
Bodkhe, S., Vigo, L., & Ermanni, P. (octobre 2019). 3D printing to automate shape memory alloy placement in composite [Communication écrite]. 30th International Conference on Adaptive Structure and Technologies, Montréal, Qc, Canada (2 pages). Lien externe
Bodkhe, S., Frei, T., & Ermanni, P. (août 2019). 4D printing of multifunctional materials [Communication écrite]. 22nd International Conference on Composite Materials, Melbourne, Australia (8 pages). Lien externe
Bodkhe, S., Testoni, O., Gosselin, F., & Therriault, D. (octobre 2017). 3D printing active piezoelectric sensors in a single step [Communication écrite]. 8th New Mech, Boston, MA, USA. Non disponible
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (avril 2017). One-step piezoelectric sensors for smart textiles [Communication écrite]. 15th Expo Hightex, Montréal, Québec. Non disponible
Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (juillet 2017). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing [Communication écrite]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Non disponible
Bodkhe, S., Gosselin, F., & Therriault, D. (août 2016). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Communication écrite]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. Lien externe
Bodkhe, S., & Therriault, D. (octobre 2015). 3D printing of nanocomposites for mechanical microsystems [Communication écrite]. S.NET 2015 : From Nanotechnologies to Emerging Technologies Towards a Global Responsibility, Montréal, Qc, Canada. Non disponible
Bodkhe, S., Gosselin, F., & Therriault, D. (juillet 2015). Three-dimensional printing of polyvinylidene fluoride nanocomposites [Communication écrite]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. Lien externe
Verma, V., Rajesh, P. S. M., Bodkhe, S., & Kamle, S. (février 2014). Bacterial cellulose enhances beta phase in PVDF [Communication écrite]. Advanced Composites for Aerospace, Marine, and Land Applications - TMS 2014 143rd Annual Meeting and Exhibition, Orlando, Florida. Lien externe
Bodkhe, S., Gosselin, F., & Therriault, D. (novembre 2014). Three-dimensional structures with polyvinylidene fluoride [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec. Non disponible
Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (juillet 2019). A novel concept of a modular shape-adaptable sandwich panel able to achieve multiple shapes [Résumé]. 10th ECCOMAS Thematic Conference on Smart Structures and Materials, Paris, France (1 page). Lien externe
Bodkhe, S. (2017). Solvent Evaporation-Assisted Three-Dimensional Printing of Piezoelectric Sensors from Polyvinylidene Fluoride and its Nanocomposites [Thèse de doctorat, École Polytechnique de Montréal]. Disponible
Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Demande de brevet no US20190284423). Lien externe
Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S., & Mahdavi, M. (2018). Additive Manufacturing of Multifunctional Nanocomposites and Composites II. Dans Beaumont, P. W. R., & Zweben, C. H. (édit.), Comprehensive Composite Materials II (380-407). Lien externe
