<  Back to the Polytechnique Montréal portal

Items where Author is "Bodkhe, Sampada"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Jump to: B | F | K | M | N | R | T | V | W
Number of items: 37.

B

Bodkhe, S., & Ermanni, P. (2020). 3D printing of multifunctional materials for sensing and actuation: Merging piezoelectricity with shape memory. European Polymer Journal, 132, 8 pages. External link

Bodkhe, S., Vigo, L., Zhu, S., Testoni, O., Aegerter, N., & Ermanni, P. (2020). 3D printing to integrate actuators into composites. Additive Manufacturing, 35, 8 pages. External link

Bodkhe, S., Vigo, L., & Ermanni, P. (2019, October). 3D printing to automate shape memory alloy placement in composite [Paper]. 30th International Conference on Adaptive Structure and Technologies, Montréal, Qc, Canada (2 pages). External link

Bodkhe, S., Frei, T., & Ermanni, P. (2019, August). 4D printing of multifunctional materials [Paper]. 22nd International Conference on Composite Materials, Melbourne, Australia (8 pages). External link

Bodkhe, S., & Ermanni, P. (2019). Challenges in 3D printing of piezoelectric materials. Multifunctional Materials, 2(2), 27 pages. External link

Bodkhe, S., Therriault, D., Gosselin, F., & Rui, T. (2019). Piezoelectric composite, ink and ink cartridge for 3D printing, bifunctional material comprising the piezoelectric composite, manufacture and uses thereof. [Composite piézoélectrique, encre et cartouche d'encre pour l'impression (3d), matériau bifonctionnel comprenant le composite piézoélectrique, leur fabrication et utilisations]. (Patent Application no. US20190284423). External link

Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2018). Coextrusion of Multifunctional Smart Sensors. Advanced Engineering Materials, 20(10), 1800206 (6 pages). External link

Bodkhe, S., Rajesh, P. S. M., Gosselin, F., & Therriault, D. (2018). Simultaneous 3D printing and poling of PVDF and its nanocomposites. ACS Applied Energy Materials, 1(6), 2474-2482. External link

Bodkhe, S. (2017). Solvent Evaporation-Assisted Three-Dimensional Printing of Piezoelectric Sensors from Polyvinylidene Fluoride and its Nanocomposites [Ph.D. thesis, École Polytechnique de Montréal]. Available

Bodkhe, S., Turcot, G., Gosselin, F., & Therriault, D. (2017). One-step solvent evaporation-assisted 3D printing of piezoelectric PVDF nanocomposite structures. ACS Applied Materials & Interfaces, 9(24), 20833-20842. Available

Bodkhe, S., Testoni, O., Gosselin, F., & Therriault, D. (2017, October). 3D printing active piezoelectric sensors in a single step [Paper]. 8th New Mech, Boston, MA, USA. Unavailable

Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2017, April). One-step piezoelectric sensors for smart textiles [Paper]. 15th Expo Hightex, Montréal, Québec. Unavailable

Bodkhe, S., Noonan, C., Gosselin, F., & Therriault, D. (2017, July). Single-step 3D printed piezoelectric sensors for fluid flow and motion sensing [Paper]. 54th Annual Technical Meeting of the Society of Engineering Science (SES 2017), Boston, United States. Unavailable

Bodkhe, S., Gosselin, F., & Therriault, D. (2016, August). Effect of nanoparticle addition on the mechanical and piezoelectric properties of 3D printed PVDF [Paper]. International conference of theoretical and applied mechanics (ICTAM 2016), Montréal, Québec. External link

Bodkhe, S., & Therriault, D. (2015, October). 3D printing of nanocomposites for mechanical microsystems [Paper]. S.NET 2015 : From Nanotechnologies to Emerging Technologies Towards a Global Responsibility, Montréal, Qc, Canada. Unavailable

Bodkhe, S., Gosselin, F., & Therriault, D. (2015, July). Three-dimensional printing of polyvinylidene fluoride nanocomposites [Paper]. 20th International Conference on Composite Materials (ICCM 2015), Copenhagen, Denmark. External link

Bodkhe, S., Rajesh, P.S.M., Kamle, S., & Verma, V. (2014). Beta-phase enhancement in polyvinylidene fluoride through filler addition: Comparing cellulose with carbon nanotubes and clay. Journal of Polymer Research, 21(5), 11 pages. External link

Bodkhe, S., Gosselin, F., & Therriault, D. (2014, November). Three-dimensional structures with polyvinylidene fluoride [Paper]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec. Unavailable

F

Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S., & Mahdavi, M. (2018). Additive Manufacturing of Multifunctional Nanocomposites and Composites II. In Beaumont, P. W. R., & Zweben, C. H. (eds.), Comprehensive Composite Materials II (pp. 380-407). External link

K

Kuthe, S., Schlothauer, A., Bodkhe, S., Hulme, C., & Ermanni, P. (2022). 3D printed mechanically representative aortic model made of gelatin fiber reinforced silicone composite. Materials Letters, 320, 4 pages. External link

M

Malfajani, R. S., Damansabz, R., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2024). 3D-printed encapsulated dielectric resonator antennas with large operation frequency ratio for future wireless communications. IEEE Open Journal of Antennas and Propagation, 14 pages. External link

Morali, A., Mandal, A., Skorobogatiy, M. A., & Bodkhe, S. (2023). Unleashing the piezoelectric potential of PVDF: a study on phase transformation from gamma (γ) to beta (β) phase through thermal contact poling. RSC Advances, 13(44), 31234-31242. Available

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A Dual Wide-Band Mushroom-Shaped Dielectric Antenna for 5G Sub-6-GHz and mm-Wave Bands. IEEE Open Journal of Antennas and Propagation, 4, 614-625. Available

Mandal, A., Morali, A., Skorobogatiy, M. A., & Bodkhe, S. (2023). 3D Printing of Polyvinylidene Fluoride-Based Piezoelectric Sensors for Noninvasive Continuous Blood Pressure Monitoring. Advanced Engineering Materials, 10 pages. External link

Malfajani, R. S., Niknam, H., Bodkhe, S., Therriault, D., Laurin, J.-J., & Sharawi, M. S. (2023). A 3D-printed Encapsulated Dual Wide-Band Dielectric Resonator Antenna with Beam Switching Capability. IEEE Open Journal of Antennas and Propagation, 4, 492-505. External link

N

Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022). Tunable thermally bistable multi-material structure. Applied Materials Today, 28, 101529 (14 pages). Available

Niknam, H., Akbarzadeh, A., Therriault, D., & Bodkhe, S. (2022, July). Additively manufactured thermally bistable structures [Paper]. 12th Canadian-International Conference on Composites (CANCOM 2022), Fredericton and Moncton, Canada. External link

R

Rajesh, P. S. M., Bodkhe, S., Kamle, S., & Verma, V. (2014). Enhancing beta-phase in PVDF through physicochemical modification of cellulose. Electronic Materials Letters, 10(1), 315-319. External link

T

Testoni, O., Bodkhe, S., Bergamini, A., & Ermanni, P. (2023). Network of selectively compliant actuators based on shape memory alloys and polymers for a reconfigurable sandwich panel. Journal of Intelligent Material Systems and Structures, 34(3), 341-351. External link

Testoni, O., Christen, S., Bodkhe, S., Bergamini, A., & Ermanni, P. (2022). A novel concept of modular shape-adaptable sandwich panel with distributed actuation based on shape memory alloys. Journal of Intelligent Material Systems and Structures, 33(11), 1439-1448. External link

Testoni, O., Lumpe, T., Huang, J.-L., Wagner, M., Bodkhe, S., Zhakypov, Z., Spolenak, R., Paik, J., Ermanni, P., Muñoz, L., & Shea, K. (2021). A 4D printed active compliant hinge for potential space applications using shape memory alloys and polymers. Smart Materials and Structures, 30(8), 13 pages. External link

Testoni, O., Bodkhe, S., Ermanni, P., & Bergamini, A. (2020, September). Mechanical Characterization of a Novel Concept of Adaptive Electrostatic Friction Damper [Paper]. Conference on Smart Materials, Adaptive Structures and Intelligent Systems (ASME 2020) (7 pages). External link

Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2020). A novel concept for adaptive friction damper based on electrostatic adhesion. Smart Materials and Structures, 29(10), 10 pages. External link

Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2019, July). A novel concept of a modular shape-adaptable sandwich panel able to achieve multiple shapes [Abstract]. 10th ECCOMAS Thematic Conference on Smart Structures and Materials, Paris, France (1 page). External link

Testoni, O., Bergamini, A., Bodkhe, S., & Ermanni, P. (2019). Smart material based mechanical switch concepts for the variation of connectivity in the core of shape-adaptable sandwich panels. Smart Materials and Structures, 28(2), 11 pages. External link

V

Verma, V., Rajesh, P. S. M., Bodkhe, S., & Kamle, S. (2014, February). Bacterial cellulose enhances beta phase in PVDF [Paper]. Advanced Composites for Aerospace, Marine, and Land Applications - TMS 2014 143rd Annual Meeting and Exhibition, Orlando, Florida. External link

W

Wallin, T. J., Pikul, J. H., Bodkhe, S., Peele, B. N., Mac Murray, B. C., Therriault, D., McEnerney, B. W., Dillon, R. P., Giannelis, E. P., & Shepherd, R. F. (2017). Click chemistry stereolithography for soft robots that self-heal. Journal of Materials Chemistry B, 5(31), 6249-6255. External link

List generated on: Thu Feb 6 05:18:39 2025 EST