Documents publiés en "2025"

A

Abanobi, A. E., Esmati, K., Khan, W. N., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025). New numerical model for anisotropic sintering of additively manufactured Binder Jet 316L parts. Journal of Manufacturing Processes, 156(Part A), 948-963. Lien externe

Abanobi, E. A., Sabiston, T., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (mars 2025). Temperature-Sensitive Isotropic Sintering Model for 316L Binder Jetting Parts [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe

C

Chakraborty, A., Lalh, M., Martin, É., Karimialavijeh, H., Bejarano, A., Wessman, A., Zou, Y., & Habibnejad-Korayem, M. (2025). Influence of carbon on the rheology and additive manufacturability of Ti-6Al-4 V powders. Materials & Design, 113833. Lien externe

D

Desgagnés, L., Tangestani, R., Khan, W. N., Miao, H., Pendurti, S., Natarajan, A., & Martin, É. (2025). Heat transfer model for powder bed temperature management in binder jetting of 316L. Materials Science in Additive Manufacturing, 5(2), 025380088 (17 pages). Lien externe

Desgagnes, L., Tangestani, R., Miao, H., Natarajan, A., Rudloff, R., Pendurti, S., Bitar-Nehme, E., & Martin, É. (mars 2025). A Layer-By-Layer FEM Curing Model for Binder Jetting of 316L [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe

E

Esmati, K., Abanobi, A. E., Khan, W. N., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025). Temperature and printing axis effects on anisotropic sintering in binder jetting additive manufactured 17-4 PH stainless steel: Experimental and numerical study. Journal of Materials Research and Technology. Lien externe

K

Karimialavijeh, H., Khan, W. N., Moradi, M., Proebstle, M., & Martin, É. (2025). Temperature induced porosity in laser powder bed fusion fabricated A20X alloy [Commentaire ou lettre]. Manufacturing Letters, 46, 148-151. Lien externe

Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (mars 2025). Development of an Environmentally Friendly and Low-Cost Binder for 17-4PH Metal Part Printing via Fused Deposition Modeling [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe

Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (2025). A Low-Viscosity, Recyclable Polymer-Based Binder Strategy for Metal FDM: Toward High Powder Loading, Sustainable Processing, and Comprehensive Characterization of 17-4PH Stainless Steel Parts. Polymers, 17(19), 2575. Lien externe

M

Moradi, M., Karimialavijeh, H., Bitar-Nehme, E., & Martin, É. (mars 2025). Printability and Green Mechanical Properties of Binder Jet Additive Manufactured Co–Cr–Mo Parts [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe

P

Paques, M., Khan, W. N., Chakraborty, A., Changeux, B., Turenne, S., Masse, J.-P., L'Espérance, G., & Martin, É. (2025). Effect of Vibratory Peening Parameters on Surface Properties of Ti-6Al-4 V Titanium Alloy: Experimental and Statistical Approach. Journal of Materials Engineering and Performance, 15 pages. Lien externe