 | Monter d'un niveau |
Abanobi, E. A., Sabiston, T., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (mars 2025). Temperature-Sensitive Isotropic Sintering Model for 316L Binder Jetting Parts [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Chakraborty, A., Lalh, M., Martin, É., Karimialavijeh, H., Bejarano, A., Wessman, A., Zou, Y., & Habibnejad-Korayem, M. (2025). Influence of carbon on the rheology and additive manufacturability of Ti-6Al-4 V powders. Materials & Design, 113833. Lien externe
Desgagnes, L., Tangestani, R., Miao, H., Natarajan, A., Rudloff, R., Pendurti, S., Bitar-Nehme, E., & Martin, É. (mars 2025). A Layer-By-Layer FEM Curing Model for Binder Jetting of 316L [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Esmati, K., Abanobi, A. E., Khan, W. N., Tangestani, R., Pendurti, S., Natarajan, A., & Martin, É. (2025). Temperature and printing axis effects on anisotropic sintering in binder jetting additive manufactured 17-4 PH stainless steel: Experimental and numerical study. Journal of Materials Research and Technology. Lien externe
Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (mars 2025). Development of an Environmentally Friendly and Low-Cost Binder for 17-4PH Metal Part Printing via Fused Deposition Modeling [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Khazaee, S., Bitar-Nehme, E., Boukhili, R., Kostenov, J., Regnaud, W., & Martin, É. (2025). A Low-Viscosity, Recyclable Polymer-Based Binder Strategy for Metal FDM: Toward High Powder Loading, Sustainable Processing, and Comprehensive Characterization of 17-4PH Stainless Steel Parts. Polymers, 17(19), 2575. Lien externe
Moradi, M., Karimialavijeh, H., Bitar-Nehme, E., & Martin, É. (mars 2025). Printability and Green Mechanical Properties of Binder Jet Additive Manufactured Co–Cr–Mo Parts [Communication écrite]. 154th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society (TMS 2025), Las Vegas, NV, USA. Publié dans The minerals, metals & materials series. Lien externe
Paques, M., Khan, W. N., Chakraborty, A., Changeux, B., Turenne, S., Masse, J.-P., L'Espérance, G., & Martin, É. (2025). Effect of Vibratory Peening Parameters on Surface Properties of Ti-6Al-4 V Titanium Alloy: Experimental and Statistical Approach. Journal of Materials Engineering and Performance, 15 pages. Lien externe
Paques, M., Khan, W. N., Chakraborty, A., Changeux, B., Turenne, S., Masse, J.-P., L'Espérance, G., & Martin, É. (2025). Effect of Vibratory Peening Parameters on Surface Properties of Ti-6Al-4 V Titanium Alloy: Experimental and Statistical Approach. Journal of Materials Engineering and Performance, 15 pages. Lien externe
