 | Monter d'un niveau |
Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages. Lien externe
Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699. Lien externe
Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Lien externe
Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible
Bouscarrat, D., Calvat, M., Vieille, B., & Lévesque, M. (juin 2022). Analyses of time-dependent damage within carbon woven-ply reinforced thermoplastic composites laminates at high temperature [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445. Disponible
Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible
Faucheux, P. A., Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Peen forming and stress peen forming of rectangular 2024-T3 aluminium sheets: Curvatures, natural curvatures and residual stresses. Strain, 58(2), e12405 (24 pages). Lien externe
Langot, J., Chávez‐Gómez, P., Lévesque, M., & Robert, É. (2022). Modeling the thermal decomposition and residual mass of a carbon fiber epoxy matrix composite with a phenomenological approach: Effect of the reaction scheme. Fire and Materials, 46(1), 262-276. Disponible
Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages). Lien externe
Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (juin 2022). In-situ full-field measurements for 3D printed composites under interlayer delamination [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe
Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP Journal of Manufacturing Science and Technology, 36, 67-77. Lien externe
Moeini, M., Begon, M., & Lévesque, M. (2022). Numerical homogenization of a linearly elastic honeycomb lattice structure and with and results. Mechanics of Materials, 167, 104210 (17 pages). Lien externe
Moeini, M., Menard, A.-L., Yue, L., Hajizadeh, M., Begon, M., & Lévesque, M. (2022). Computationally efficient model to predict the deformations of a cellular foot orthotic. Computers in Biology and Medicine, 146, 105532 (16 pages). Lien externe
Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible
Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Accès restreint
Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible
Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible
Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages. Lien externe
Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699. Lien externe
Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages. Lien externe
Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699. Lien externe
