Documents publiés en "2022"

A

Abderrafai, Y., Hadi Mahdavi, M., Sosa-Rey, F., Herard, C., Otero Navas, I., Piccirelli, N., Lévesque, M., & Therriault, D. (2022). Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization. Materials and Design, 214, 11 pages. Lien externe

Abderrefai, Y., Diouf Lewis, A., Farahani, R. D., Navas, I. O., Lévesque, M., & Therriault, D. (2022). Objective 1: Design and formulate different HTRT materials (PEI or PEEK) reinforced with carbon fibers. (Rapport technique). Non disponible

B

Bouscarrat, D., Calvat, M., Vieille, B., & Lévesque, M. (juin 2022). Analyses of time-dependent damage within carbon woven-ply reinforced thermoplastic composites laminates at high temperature [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe

D

Diouf Lewis, A., Farahani, R. D., Iervolino, F., Pierre, J., Abderrafai, Y., Lévesque, M., Piccirelli, N., & Therriault, D. (2022). Design and characterization of carbon fiber-reinforced PEEK/PEI blends for Fused Filament Fabrication additive manufacturing. Materials Today Communications, 31, 103445. Disponible

F

Farahani, R. D., Lévesque, M., & Therriault, D. (2022). Advanced manufacturing of composites for structural and acoustic applications. (Rapport technique). Non disponible

Faucheux, P. A., Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Peen forming and stress peen forming of rectangular 2024-T3 aluminium sheets: Curvatures, natural curvatures and residual stresses. Strain, 58(2), e12405 (24 pages). Lien externe

L

Langot, J., Chávez‐Gómez, P., Lévesque, M., & Robert, É. (2022). Modeling the thermal decomposition and residual mass of a carbon fiber epoxy matrix composite with a phenomenological approach: Effect of the reaction scheme. Fire and Materials, 46(1), 262-276. Disponible

Lingua, A., Piccirelli, N., Therriault, D., & Lévesque, M. (2022). In-situ full-field measurements for 3D printed polymers during mode I interface failure. Engineering Fracture Mechanics, 269, 108483 (14 pages). Lien externe

Lingua, A., Picirelli, N., Therriault, D., & Lévesque, M. (juin 2022). In-situ full-field measurements for 3D printed composites under interlayer delamination [Communication écrite]. 20th European Conference on Composite Materials: Composites Meet Sustainability (ECCM 2022), Lausanne, Switzerland. Lien externe

M

Miao, H. Y., Lévesque, M., & Gosselin, F. (2022). Shot peen forming pattern optimization to achieve cylindrical and saddle target shapes: The inverse problem. CIRP Journal of Manufacturing Science and Technology, 36, 67-77. Lien externe

Moeini, M., Begon, M., & Lévesque, M. (2022). Numerical homogenization of a linearly elastic honeycomb lattice structure and with and results. Mechanics of Materials, 167, 104210 (17 pages). Lien externe

Moeini, M., Menard, A.-L., Yue, L., Hajizadeh, M., Begon, M., & Lévesque, M. (2022). Computationally efficient model to predict the deformations of a cellular foot orthotic. Computers in Biology and Medicine, 146, 105532 (16 pages). Lien externe

S

Sosa Rey, F., Lingua, A., Lampron, O., Lévesque, M., & Therriault, D. (2022). Objective 2: Predict mechanical response of AM composites. (Rapport technique). Non disponible

Sosa-Rey, F., Abderrafai, Y., Diouf Lewis, A., Therriault, D., Piccirelli, N., & Lévesque, M. (2022). OpenFiberSeg: Open-source segmentation of individual fibers and porosity in tomographic scans of additively manufactured short fiber reinforced composites. Composites Science and Technology, 226, 109497 (13 pages). Accès restreint

T

Trofimov, A., Le Pavic, J., Pautard, S., Therriault, D., & Lévesque, M. (2022). Experimentally validated modeling of the temperature distribution and the distortion during the Fused Filament Fabrication process. Additive Manufacturing, 54, 102693 (17 pages). Disponible

Trofimov, A., Toloup, C., Lévesque, M., & Therriault, D. (2022). Supplementary Objective 1: 3D reinforced composites manufactured by Resin Transfer Molding (RTM). (Rapport technique). Non disponible

Y

Yue, L., Heuzey, M.-C., Jalbert, J., & Lévesque, M. (2022). On the parameters identification of three-dimensional aging-temperature-dependent viscoelastic solids through a Bayesian approach. Mechanics of Time-Dependent Materials, 23 pages. Lien externe

Yue, L., Jalbert, J., Heuzey, M.-C., & Lévesque, M. (2022). On the strain measurement for thermoplastics with bi-axial extensometer in thermo-mechanical testing: A case of characterizing temperature and physical aging effects on polycarbonate. Experimental Mechanics, 62(9), 1691-1699. Lien externe