Documents publiés en "2014"

A

Aissa, B., Hena-Zamal, H., Asgar-Khan, M., Haddad, E., Therriault, D., & Rosei, F. (octobre 2013). Fabrication of 3D micro-vascular network based carbon nanotube materials by the direct-write microfluidic infiltration approach for self healing applications [Communication écrite]. Materials Science and Technology Conference and Exhibition (MS and T 2013), Montréal, Québec. Non disponible

B

Bodkhe, S., Gosselin, F., & Therriault, D. (novembre 2014). Three-dimensional structures with polyvinylidene fluoride [Communication écrite]. ASME 2014 International Mechanical Engineering Congress and Exposition, Montréal, Québec. Non disponible

C

Cauchy, X., Sapieha, J.-E., & Therriault, D. (septembre 2014). Highly conductive heterogeneous epoxy-Silver composites by phase selective in-Situ filler synthesis [Communication écrite]. 29th Annual Technical Conference of the American Society for Composites (ASC 2014); 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting, La Jolla, San Diego, CA, United states. Lien externe

Cauchy, X., Sapieha, J.-E., & Therriault, D. (octobre 2014). In-situ formation of conduction networks in highly conductive heterogeneous epoxy-silver composites [Communication écrite]. Composites and Advanced Materials Expo (CAMX 2014), Orlando, Florida. Non disponible

Chizari, K., & Therriault, D. (novembre 2014). Conductive filaments from CNTs/PLA composites [Affiche]. ASME International Mechanical Engineering Congress & Exposition, Montréal, Québec. Non disponible

Chizari, K., & Therriault, D. (août 2014). Fabrication of Conductive Microfilaments and Liquid Sensor from CNTs/PLA Nanocomposites [Communication écrite]. 10th Joint Canada-Japan Workshop on Composites, Vancouver, Canada. Lien externe

D

Dermanaki-Farahani, R., Laberge Lebel, L., & Therriault, D. (2014). Manufacturing of three-dimensionally microstructured nanocomposites through microfluidic infiltration. Journal of Visualized Experiments (85). Lien externe

F

Farahani, R. D., Chizari, K., & Therriault, D. (2014). Three-dimensional printing of freeform helical microstructures: a review. Nanoscale, 6(18), 10470-10485. Disponible

Farahani, R. D., Laberge Lebel, L., & Therriault, D. (2014). Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing. Journal of Micromechanics and Microengineering, 24(5), 055020 (12 pages). Disponible

G

Gagne, M., & Therriault, D. (2014). Lightning strike protection of composites. Progress in Aerospace Sciences, 64, 1-16. Lien externe

Guérin, N., Lévesque, M., & Therriault, D. (2014). Helical dielectrophoretic particle separator fabricated by conformal spindle printing. Journal of Biomedical Science and Engineering, 7(9), 641-650. Disponible

Guo, S., Heuzey, M.-C., & Therriault, D. (2014). Properties of polylactide inks for solvent-cast printing of three-dimensional freeform microstructures. Langmuir, 30(4), 1142-1150. Disponible

L

Lanouette, A. M., Potvin, M. J., Martin, F., Mondor, S., Houle, D., & Therriault, D. (avril 2014). Experimental Evaluation of the Canadarm2 Residual Flexural Strength After an Orbital Debris Impact [Communication écrite]. 13th European Conference on Spacecraft Structures, Materials & Environmental Testing, Braunschweig, Germany. Lien externe

N

Najafi Chaloupli, N., Heuzey, M.-C., Carreau, P., Therriault, D., & Park, C. B. (2014). Rheological and foaming behavior of linear and branched polylactides. Rheologica Acta, 53(10-11), 779-790. Disponible

P

Passieux, R., Therriault, D., & Gosselin, F. (novembre 2014). Creation of Sacrificial Bonds by Viscous Flow Instability [Communication écrite]. ASME International Mechanical Engineering Congress & Exposition (IMECE 2014), Montréal, Québec. Lien externe

T

Talwar, B. S., Guo, S., Chizari, K., & Therriault, D. (novembre 2014). Investigation of carbon nanotubes mixing methods and functionalizations for electrically conductive polymer composites [Communication écrite]. ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Montréal, Québec (5 pages). Lien externe