Documents publiés en "2013"

B

Billotte, C., Bernard, F. M., & Ruiz, E. (2013). Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method. European Polymer Journal, 49(11), 3548-3560. Lien externe

Billotte, C., Fellah, C., & Ruiz, E. (juillet 2013). Chemical shrinkage and thermomechanical characterization of different resin systems and prepregs during cure by a novel in situ measurement method [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

C

Causse, P., Ruiz, E., & Trochu, F. (2013). Influence of Preforming on the Quality of Curved Composite Parts Manufactured by Flexible Injection. International Journal of Material Forming, 6(3), 341-362. Lien externe

Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). Processing warpage of asymmetric composite panels manufactured by resin transfer molding [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Charette, E., Fotsing, E. R., Billotte, C., Ruiz, E., & Grenier, D. (juillet 2013). Effect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

F

Favre, A., Fotsing, E. R., Ruiz, E., & Lévesque, M. (juillet 2013). Underwater accelerated aging of elastomeric composite materials [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Fotsing, E. R., Sola, M., Ross, A., & Ruiz, E. (2013). Lightweight damping of composite sandwich beams: Experimental analysis. Journal of Composite Materials, 47(12), 1501-1511. Lien externe

Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

G

Gutiérrez, J., Ruiz, E., & Trochu, F. (2013). Exploring the behavior of glass fiber reinforcements under vibration-assisted compaction. Journal of the Textile Institute, 104(9), 980-993. Lien externe

Gutierrez, J., Ruiz, E., & Trochu, F. (2013). High-frequency vibrations on the compaction of dry fibrous reinforcements. Advanced Composite Materials, 22(1), 13-27. Lien externe

L

LeBel, F., Fanaei, A. E., Ruiz, E., & Trochu, F. (2013). Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics. Textile Research Journal, 83(15), 1634-1659. Lien externe

P

Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (juillet 2013). Formation of porosities in RTM by VOCS and water vapour [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

R

Ravey, C., Lebel, F., Ruiz, E., Courteau-Godmaire, H., & Trochu, F. (juillet 2013). Void minimization and optimization of injection velocity in RTM processing [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ravey, C., Ruiz, E., & Trochu, F. (juillet 2013). Determination of the optimal injection velocity in resin transfer molding by infrared thermography [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Renaud, J., Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). A study of consolidation equilibrium in composites made by flexible injection [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe