 | Monter d'un niveau |
Boime, B., Guittard, D., Ferland, P., Trochu, F., & Gauvin, R. (mai 1995). Mold filling simulation of the resin transfer molding process for complex three-dimensional ribbed parts [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible
De Santis, S., Trochu, F., Ostiguy, G. L., Sol, H., & DeVisscher, J. (mai 1995). Dynamic characterization of composites with embedded shape memory alloys: Some experimental results [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Diallo, M. L., Gauvin, R., & Trochu, F. (septembre 1995). Experimental analysis of flow through multi-layer fiber reinforcements in liquid composite molding [Communication écrite]. 4th International Conference on Automated Composites (ICAC 1995), Nottingham. Non disponible
Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). Development of strength failure criteria for fibrous composite laminates [Communication écrite]. 40th International SAMPE Symposium and Exhibition, Anaheim, Ca, USA. Non disponible
Echaabi, J., Trochu, F., & Gauvin, R. (1995). A general strength theory for composite materials based on dual kriging interpolation. Journal of Reinforced Plastics and Composites, 14(3), 211-232. Lien externe
Echaabi, J., Trochu, F., & Gauvin, R. (mai 1995). A methodology to derive failure criteria for composite laminates [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Echaabi, J., Trochu, F., Ratle, A., & Gauvin, R. (août 1995). Failure modes and damage progression of a quasi-isotropic graphite-epoxy composite in flexural bending test [Communication écrite]. 10th international conference on composite materials, Vancouver, BC, CAN. Lien externe
Ferland, P., Trochu, F., Gauvin, R., Guittard, D., & Boime, B. (mai 1995). Rate of conversion, temperature variation and flow simulation of reactive liquid during rtm and srim mold filling [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Gao, D. M., Trochu, F., & Gauvin, R. (1995). Heat transfer analysis of non-isothermal resin transfer molding by the finite element method. Materials and Manufacturing Processes, 10(1), 57-64. Lien externe
Gauvin, R., Pomerleau, É., Trochu, F., & Lours, T. (mai 1995). Damping and impact properties of shape memory alloy reinforced composites [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Gillet, Y., Meunier, M. A., Brailovski, V., Trochu, F., Patoor, E., & Berveiller, M. (août 1995). Comparison of thermomechanical models for shape memory alloy springs [Communication écrite]. 8th International Conference on Martensitic Transformations (ICOMAT-8). Publié dans Journal de physique. IV, 5(8, pt. 2). Lien externe
Hammami, A., Trochu, F., Gauvin, R., & Wirth, S. (mai 1995). Directional permeability measurement of deformed reinforcement [Communication écrite]. 1st International Conference on Composite Materials and Energy (ENERCOMP 1995), Montréal, Québec. Non disponible
Limaiem, A., & Trochu, F. (1995). Geometric algorithms for the intersection of curves and surfaces. Computers & Graphics, 19(3), 391-403. Lien externe
Mamat, A., Trochu, F., & Sanschagrin, B. (1995). Analysis of shrinkage by dual kriging for filled and unfilled polypropylene molded parts. Polymer Engineering and Science, 35(19), 1511-1520. Lien externe
Mayer, J. R. R., Mir, Y. A., Balazinski, M., Trochu, F., & Vafaeesefat, A. (janvier 1995). Modeling of sculptured surfaces from touch probe measurements [Communication écrite]. 2nd International Conference on the Concurrent Engineering, Potomac. Non disponible
Trochu, F., Boudreault, J.-F., Gao, D. M., & Gauvin, R. (1995). Three-dimensional flow simulations for the resin transfer molding process. Materials and Manufacturing Processes, 10(1), 21-26. Lien externe
