<  Retour au portail Polytechnique Montréal

Documents dont le centre de recherche est "CREPEC - Centre de recherche sur les systèmes polymères et composites à haute performance"

Monter d'un niveau
Pour citer ou exporter [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Grouper par: Auteurs ou autrices | Sous-type de document | Aucun groupement
Aller à : A | C | F | G | L | M | N | P | R | T | V | Z
Nombre de documents: 19

A

Aïssa, B., Nedil, M., Habib, M. A., Haddad, E., Jamroz, W., Therriault, D., Coulibaly, Y., & Rosei, F. (2013). Fluidic patch antenna based on liquid metal alloy/single-wall carbon-nanotubes operating at the S-band frequency. Applied Physics Letters, 103(6), 063101 (5 pages). Disponible

Arias, A., Kawano, C., Heuzey, M.-C., & Huneault, M. A. (juillet 2013). Compatibilization of polylactide-based flax fiber biocomposites [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

C

Charette, E., Fotsing, E. R., Billotte, C., Ruiz, E., & Grenier, D. (juillet 2013). Effect of humidity and temperature on the curing and aging of a room temperature epoxy adhesive [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

F

Fotsing, E. R., Sola, M., Ruiz, E., & Ross, A. (juillet 2013). Mechanical properties of composite sandwich structures with core or face sheet discontinuities [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

G

Guo, S., Gosselin, F., Guérin, N., Lanouette, A.-M., Heuzey, M.-C., & Therriault, D. (2013). Solvent-cast three-dimensional printing of multifunctional microsystems. Small, 9(24), 4118-4122. Disponible

L

Leclerc, C., Fotsing, E. R., & Ross, A. (juillet 2013). Modal analysis of composite sandwich structures with viscoelastic layers [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

M

Mortazavi, F., Ghossein, E., Lévesque, M., & Villemure, I. (juillet 2013). High resolution measurement of internal full-field displacements and strains using global spectral digital volume correlation [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

N

Najafi, N., Heuzey, M.-C., & Carreau, P. (2013). Crystallization behavior and morphology of polylactide and PLA/clay nanocomposites in the presence of chain extenders. Polymer Engineering and Science, 53(5), 1053-1064. Lien externe

P

Pahlavanpour, M., Moussaddy, H., Ghossein, E., Hubert, P., & Lévesque, M. (2013). Prediction of elastic properties in polymer-clay nanocomposites: Analytical homogenization methods and 3D finite element modeling. Computational Materials Science, 79, 206-215. Lien externe

Pupin, C., Loiselle-Shebib, V., Ruiz, E., Ross, A., Dauchier, M., Dambrine, B., & Godon, T. (juillet 2013). Formation of porosities in RTM by VOCS and water vapour [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

R

Rahmani, B., Mortazavi, F., Villemure, I., & Lévesque, M. (2013). A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating. Composite Structures, 105, 1160-125. Lien externe

Rahmani, B., Villemure, I., & Lévesque, M. (mai 2013). A new regularized model updating approach for accurate mechanical properties identification of composite materials [Communication écrite]. Photomechanics, Montpellier, France. Non disponible

Ravey, C., Lebel, F., Ruiz, E., Courteau-Godmaire, H., & Trochu, F. (juillet 2013). Void minimization and optimization of injection velocity in RTM processing [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Ravey, C., Ruiz, E., & Trochu, F. (juillet 2013). Determination of the optimal injection velocity in resin transfer molding by infrared thermography [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Renaud, J., Causse, P., Ruiz, E., & Trochu, F. (juillet 2013). A study of consolidation equilibrium in composites made by flexible injection [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

T

Taghizadeh, A., & Favis, B. D. (2013). Carbon nanotubes in blends of polycaprolactone/thermoplastic starch. Carbohydrate Polymers, 98(1), 189-98. Lien externe

Tavares, J. R. (décembre 2013). L'ingénierie photochimique des surfaces pour permettre la synthèse de nanocomposites [Communication écrite]. Colloque CREPEC, Montréal, Québec. Non disponible

V

Vernet, N., & Trochu, F. (juillet 2013). Permeability analytical modeling of 3D interlock fabrics [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Z

Zohrevand, A., Ajji, A., & Mighri, F. (juillet 2013). Microstructure and mechanical properties of isotactic polypropylene reinforced with TiO₂ nanoparticles [Communication écrite]. 19th International Conference on Composite Materials (ICCM 2013), Montréal, Québec. Lien externe

Liste produite: Fri Mar 29 05:04:51 2024 EDT.