 | Monter d'un niveau |
Cho, J. C., Heuzey, M.-C., & Hamdine, M. (2007). Gel Point Investigation of a Chitosan System Using Fourier Transform Rheometry and Multi-Frequency Excitation. Macromolecular Materials and Engineering, 292(5), 571-581. Lien externe
Eslami, H., Grmela, M., & Bousmina, M. (2007). Mesoscopic Rheological Model of Polymer/Layered Silicate Nanocomposites. Journal of Rheology, 51(6), 1189-1222. Lien externe
Fang, H., Mighri, F., & Ajji, A. (2007). Miscibility characterization of SMA/SAN and SMA/PMMA blends by differential scanning calorimetry and fluorescence techniques. Journal of Applied Polymer Science, 105(5), 2955-2962. Lien externe
Fauteux, C., Longtin, R., Pegna, J., & Therriault, D. (2007). Fast Synthesis of ZnO Nanostructures by Laser-Induced Decomposition of Zinc Acetylacetonate. Inorganic Chemistry, 46(26), 11036-11047. Lien externe
Ghafar-Zadeh, E., Sawan, M., & Therriault, D. (2007). Novel Direct-Write Cmos-Based Laboratory-on-Chip: Design, Assembly and Experimental Results. Sensors and Actuators A: Physical, 134(1), 27-36. Lien externe
Guo, M.-C., Heuzey, M.-C., & Carreau, P. (2007). Cell Structure and Dynamic Properties of Injection Molded Polypropylene Foams. Polymer Engineering and Science, 47(7), 1070-1081. Lien externe
Guo, M.-C., Santoni, A., Heuzey, M.-C., & Carreau, P. (2007). Occurrence of Surface Defects in Tpo Injected Foam Parts. Journal of Cellular Plastics, 43(4-5), 273-296. Lien externe
Mobuchon, C., Carreau, P., & Heuzey, M.-C. (2007). Effect of Flow History on the Structure of a Non-Polar Polymer/Clay Nanocomposite Model System. Rheologica Acta, 46(8), 1045-1056. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2007). Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on EPDM/PP (Rheology & Morphology). International Polymer Processing, 22(3), 284-292. Lien externe
Naderi, G., Lafleur, P., & Dubois, C. (2007). Microstructure-Properties Correlations in Dynamically Vulcanized Nanocomposite Thermoplastic Elastomers Based on PP/EPDM. Polymer Engineering and Science, 47(3), 207-217. Lien externe
Ruiz, E., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part II: non-isothermal Filling and Curing. Science and Engineering of Composite Materials, 14(2), 113-144. Disponible
Ruiz, E., Achim, V., & Trochu, F. (2007). Coupled non-conforming finite element and finite difference approximation based on laminate extrapolation to simulate liquid composite molding processes. Part I: isothermal flow. Science and Engineering of Composite Materials, 14(2), 85-112. Disponible
Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Microporous Membranes Obtained From Polypropylene Films by Stretching. Journal of Membrane Science, 292(1), 62-71. Lien externe
Sadeghi, F., Ajji, A., & Carreau, P. (2007). Analysis of Row Nucleated Larnellar Morphology of Polypropylene Obtained From the Cast Film Process : Effect of Melt Rheology and Process Conditions. Polymer Engineering and Science, 47(7), 1170-1178. Lien externe
Savarmand, S., Heniche, M., Béchard, V., Bertrand, F., & Carreau, P. (2007). Analysis of the Vane Rheometer Using 3D Finite Element Simulation. Journal of Rheology, 51(2), 161-177. Lien externe
Therriault, D., White, S. R., & Lewis, J. A. (2007). Rheological behavior of fugitive organic inks for direct-write assembly. Applied Rheology, 17(1), 10112-10121. Disponible
Laberge Lebel, L., Aïssa, B., El Khakani, M. A., & Therriault, D. (décembre 2007). Three-dimensional microstructures of SWCNT-polymer nanocomposites by a microfluidic infiltration approach [Communication écrite]. Crepec 2007, Montréal, Québec. Lien externe
Carreau, P., Férec, F., Siffert, J. R. R., Ramirez-Moreno, M. J., Heuzey, M.-C., Pérez-González, L., de Vargas, C., & Mobuchon, L. (mai 2007). Rheological properties of short fiber filled polypropylene in extensional flow [Résumé]. 23rd Annual Meeting of Polymer Processing Society (PPS-23), Salvador, Brazil. Non disponible
Huneault, M. A., Li, H., Chapleau, N., Mihai, M., & Favis, B. D. (mai 2007). Interface modified PLA/thermoplastic starch blends: properties and applications [Résumé]. 23rd Annual Meeting of Polymer Processing Society (PPS-23), Salvador, Brazil. Non disponible
